[Eisfair] Parallel-Drucker an Eisfair 2 funktioniert nicht

Christoph Schütz christoph-schuetz at gmx.net
Mo Apr 30 10:08:08 CEST 2012


Am 30.04.2012, 01:21 Uhr, schrieb Thomas Bork <tom at eisfair.org>:

> Was denn nun? Bei mir steht (im Gegensatz zu dem, was Du oben  
> geschrieben hast)
>
> LPRNG_LOCAL_PARPORT_PRINTER1_IRQ = no
>
> und damit wird 'irq none' gesetzt.
>
> Was passiert nun also, wenn Du
>
> LPRNG_LOCAL_PARPORT_PRINTER1_IRQ = no
>
> setzt?
> Wie ist die Parallel-Schnittstelle im BIOS konfiguriert?

Hallo Tom,

ich hatte mich in dem vorherigen Beitrag bzgl. des setzens der Variable  
einfach nur verschrieben.
Variable auf no gesetzt und Konfiguration aktiviert:

Activate Lprng configuration now (y/n) [y]?
Stopping LPRng ...
LPRng was stopped
ppdev unloaded
parport unloaded
usblp unloaded
Removing /var/spool/lpd...
Configuration file was saved as printcap.sic in /etc.
no remote printers active.
Starting LPRng ...
parport loaded
parport_pc loaded on io 0x378 irq none
lp loaded on parport 0
Warning -   changing ownership '//var/spool/lpd' to 7/7
Warning -   changing ownership '//var/spool/lpd' to 7/7
Warning -   changing ownership '//var/spool/lpd/pr1' to 7/7
Warning -   changing ownership '//var/spool/lpd/pr1' to 7/7
Warning - pr1: cannot stat lp device '/dev/lp0' - No such file or directory
Warning -   changing ownership '//var/spool/lpd/usbpr1' to 7/7
Warning -   changing ownership '//var/spool/lpd/usbpr1' to 7/7
LPRng is now running

If your configuration changed and you want to print over Samba,
you have to create a new Samba Configuration now.

Im Bios steht der Parallel Port auf SPP.


Mehr Informationen über die Mailingliste Eisfair