[Eisfair] [e1] lprng 1.17.1

[Fabian Törner]

Nachtrag:

Am 14.08.2012 08:31, schrieb Fabian Törner:

> habe das neue lprng geupdated dort kam folgende Fehlermerldung obwohl
> ich in der Konfig nichts geändert hatte:

Beim Update des Samba-Pakets wurde der Drucker dann natürlich auch nicht 
mehr gefunden:

Stopping Smbfs ...
smbfs is not loaded
cifs is not loaded
Stopping Samba ...
smbd was stopped
nmbd was stopped
winbindd is not running
deinstalling old samba 1.54.3 (3.5.16-for-eisfair-1-patch-1) ...
installing new samba 1.54.4 (3.5.17-for-eisfair-1-patch-1) ...
Configuration file was saved as samba.2012-08-14-08-31-41 in /etc/backup.d.
Backup directory contained 11 files for package samba (1 removed).
Configuration file was saved as smb.conf.sic in /etc.
Configuration file was saved as smbpasswd.sic in /etc.
Configuration file was saved as user.map.sic in /etc.
generating sample configuration file /etc/default.d/samba ...
updating your configuration file /etc/config.d/samba ...
Configuration file was saved as smb.conf.sic in /etc.
creating /samba_dfs and mounting ...
mounted /usr/local/share/samba/dfs_root.img --rw
SAMBA_DFSROOT_1 is not active - skipping SAMBA_DFSROOT_1 ...
umounting and removing /samba_dfs ...
no msdfs link found, removing /usr/local/share/samba/dfs_root.img ...
skipping SAMBA_PRINTER_2 because there is no entry
usbpr1 in /etc/printcap. Check SAMBA_PRINTER_2_CAPNAME
and read documentation
Starting Samba ...
nmbd is now running
smbd is now running
Starting Smbfs ...

Dann habe ich das alte lprng Paket (1.16.3) installiert, da siehts dann 
wieder so aus:

Please wait ...
preinstalling lprng ...
deinstalling old lprng 1.17.1 (3.8.33) ...
Stopping LPRng ...
LPRng was stopped
installing new lprng 1.16.3 (3.8.33) ...
Configuration file was saved as lprng.2012-08-14-08-33-07 in /etc/backup.d.
Backup directory contained 11 files for package lprng (1 removed).
Configuration file was saved as printcap.sic in /etc.
Modifications will be taken into account right now.
generating sample configuration file /etc/default.d/lprng ...
updating your configuration file /etc/config.d/lprng ...
Configuration file was saved as printcap.sic in /etc.
no parport printers active.
no remote printers active.
Starting LPRng ...
Warning -   changing ownership '//var/spool/lpd/usbpr1' to 7/7
Warning -   changing ownership '//var/spool/lpd/usbpr1' to 7/7
Warning - usbpr1: cannot open lp device '/dev/usb/lp0' - No such device
LPRng is now running
Press ENTER to continue

in der messages.log steht:

Aug 14 08:36:55 eis kernel: usb 2-1: device descriptor read/64, error -110
Aug 14 08:36:55 eis kernel: usb 2-1: New USB device found, 
idVendor=04e8, idProduct=300c
Aug 14 08:36:55 eis kernel: usb 2-1: New USB device strings: Mfr=1, 
Product=2, SerialNumber=0
Aug 14 08:36:55 eis kernel: usb 2-1: Product: Samsung Laser Printer 
ML-1200 Series
Aug 14 08:36:55 eis kernel: usb 2-1: Manufacturer: Samsung Electronics 
Co., Ltd.
Aug 14 08:36:55 eis kernel: usb 2-1: configuration #1 chosen from 1 choice
Aug 14 08:36:55 eis kernel: usblp0: USB Bidirectional printer dev 10 if 
0 alt 0 proto 2 vid 0x04E8 pid 0x300C
Aug 14 08:37:35 eis kernel: usbcore: deregistering interface driver usblp
Aug 14 08:37:35 eis kernel: usblp0: removed
Aug 14 08:37:35 eis kernel: usblp0: USB Bidirectional printer dev 10 if 
0 alt 0 proto 2 vid 0x04E8 pid 0x300C
Aug 14 08:37:35 eis kernel: usbcore: registered new interface driver usblp


Nachdem ich dann die Sambakonfiguration nochmals aufgerufen hatte und 
gespeichert und aktiviert hatte geht nun auch wieder der Drucker :)

Wenn noch was fehlt oder ich was zur Fehlerbehebung beitragen kann - 
immer her damit.

Vielen Dank & viele Grüße
Fabian