[Eisfair] Eisfair 1 auf ZOTAC CI323

[Thomas Bork]

Am 19.12.2015 um 17:01 schrieb Björn Bischoff:

> 00:13.0 SATA controller: Intel Corporation Device 22a3 (rev 21) (prog-if
> 01 [AHCI 1.0])
>      Subsystem: ZOTAC International (MCO) Ltd. Device b301
>      Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
>      Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>      Latency: 0
>      Interrupt: pin A routed to IRQ 135
>      Region 4: I/O ports at f060 [size=32]
>      Region 5: Memory at 81315000 (32-bit, non-prefetchable) [size=2K]
>      Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>          Address: fee0f00c  Data: 41c1
>      Capabilities: [70] Power Management version 3
>          Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold-)
>          Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>      Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
>      Kernel driver in use: ahci

Hier sehe ich ahci. Ist wohl bei dem verwendeten System fest einkompiliert.

> /sbin/insmod /lib/modules/3.2.71-eisfair-1-SMP/psmouse.ko
> /sbin/insmod /lib/modules/3.2.71-eisfair-1-SMP/usb-common.ko
> /sbin/insmod /lib/modules/3.2.71-eisfair-1-SMP/usbcore.ko
> /sbin/insmod /lib/modules/3.2.71-eisfair-1-SMP/ehci-hcd.ko
> /sbin/insmod /lib/modules/3.2.71-eisfair-1-SMP/uhci-hcd.ko
> /sbin/insmod /lib/modules/3.2.71-eisfair-1-SMP/ssb.ko
> /sbin/insmod /lib/modules/3.2.71-eisfair-1-SMP/ohci-hcd.ko
> /sbin/insmod /lib/modules/3.2.71-eisfair-1-SMP/xhci-hcd.ko
> /sbin/insmod /lib/modules/3.2.71-eisfair-1-SMP/hid.ko
> /sbin/insmod /lib/modules/3.2.71-eisfair-1-SMP/usbhid.ko
> /sbin/insmod /lib/modules/3.2.71-eisfair-1-SMP/scsi_mod.ko
> /sbin/insmod /lib/modules/3.2.71-eisfair-1-SMP/sd_mod.ko
> /sbin/insmod /lib/modules/3.2.71-eisfair-1-SMP/libata.ko
> /sbin/insmod /lib/modules/3.2.71-eisfair-1-SMP/libahci.ko
> /sbin/insmod /lib/modules/3.2.71-eisfair-1-SMP/ahci.ko
> /bin/echo -e "\\033[32m\\033[49mWaiting for SCSI-/SATA-/USB-STORAGE
> devices coming up ...\\033[0m"
> /bin/sleep 10
> sieht für mich eigentlich auch okay aus.

Für mich auch.

-- 
der tom
[eisfair-team]