[Eisfair] Update Base 2.8.2 online

[Daniel Kubein]

Ein paar andere Fehler finden sich jedoch leider noch immer beim Start:

Hier will er irgendwas noch, was ihm nicht passt

ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] 
(20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] 
(20140424/hwxface-580)
ACPI: (supports S0 S1 S5)
ACPI: Using PIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use 
"pci=use_crs" and report a bug
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x14000000-0xffdfffff] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended 
PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]


Und hier auch ->

pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [8086:7113] type 00 class 0x068000
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:14.3: quirk: [io  0xf800-0xf83f] claimed by PIIX4 ACPI
pci 0000:00:14.3: quirk: [io  0xfc00-0xfc0f] claimed by PIIX4 SMB




Woher das kommt habe ich auch gar keinen Plan, denn es ist ein Intel ->

PCI: pci_cache_line_size set to 32 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
amd_nb: Cannot enumerate AMD northbridges
Switched to clocksource pit
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: disabling [io  0xf800-0xf81f] because it overlaps 
0000:00:14.3 BAR 7 [io  0xf800-0xf83f]
pnp 00:09: disabling [io  0xf820-0xf83f] because it overlaps 
0000:00:14.3 BAR 7 [io  0xf800-0xf83f]
pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 
0000:00:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:0a: disabling [mem 0x000e0000-0x000fffff] because it overlaps 
0000:00:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
Switched to clocksource acpi_pm




Dahingehend ist mir nicht bewusst es aktiviert zu haben ->

input: PC Speaker as /devices/platform/pcspkr/input/input4
piix4_smbus 0000:00:14.3: SMBus Host Controller at 0xfc00, revision 0
ide-cd driver 5.00
ide-cd: hdc: ATAPI 24X CD-ROM drive, 512kB Cache
cdrom: Uniform CD-ROM driver Revision: 3.20
Error: Driver 'pcspkr' is already registered, aborting...
sb: Init: Starting Probe...
sb: Init: Done
Error: Driver 'pcspkr' is already registered, aborting...
ppdev: user-space parallel port driver
Adding 1052252k swap on /dev/hda2.  Priority:-1 extents:1 across:1052252k FS



So und das war's dann aber auch ->

RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): enx000e0cd0b89a: link is not ready
parport_pc 00:03: disabled
parport_pc 00:03: activated
parport_pc 00:03: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
ppdev: user-space parallel port driver
lp0: using parport0 (interrupt-driven).
parport_pc 00:03: disabled
ppdev: user-space parallel port driver
parport_pc 00:03: activated
parport_pc 00:03: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).



Er weist aber keine Fehlfunktionen auf, behaupte ich mal :-)


Gruß Daniel