[Eisfair] E1 kleiner Fileserver, div. problemchen oder tuneup?

Kay Martinen kay at martinen.de
So Jan 7 00:12:01 CET 2018


Hallo

ich hab da mit einem Eis-1 (aktueller Stand) auf echter HW diverse
Problemchen bei denen ich nicht recht weiß wie ich die am besten lösen
könnte. Der läuft an sich problemlos, aber es sind halt mir wichtige
Details. Darum könnte ich mal Hilfe brauchen um die zu beheben.

Im einzelnen sind das.
- ob die HW überall die richtigen Treiber nutzt? pata für sata z.b.?
- Dito für die kürzlich dazu gekommene Extra S-ATA Karte.
- dmesg zeigt zumindest eine "region" an und dazu was über acpi. ???
- er hat mehr sensoren als lm-sensors zeigt/liefert.
- eine externe Platte ist per smartctl zwar erreichbar aber da tauchen
ein paar fehlermeldungen auf die nicht recht verstehe.

Erst mal die HW lt. lspci -v

> 00:00.0 Host bridge: Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03)
>         Subsystem: Intel Corporation Mobile 945GSE Express Memory Controller Hub
>         Flags: bus master, fast devsel, latency 0
>         Capabilities: [e0] Vendor Specific Information: Len=09 <?>
> 
> 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
>         Subsystem: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller
>         Flags: bus master, fast devsel, latency 0, IRQ 10
>         Memory at fde80000 (32-bit, non-prefetchable) [size=512K]
>         I/O ports at ff00 [size=8]
>         Memory at d0000000 (32-bit, prefetchable) [size=256M]
>         Memory at fdf80000 (32-bit, non-prefetchable) [size=256K]
>         Expansion ROM at <unassigned> [disabled]
>         Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
>         Capabilities: [d0] Power Management version 2
> 
> 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
>         Subsystem: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller
>         Flags: fast devsel
>         Memory at fdf00000 (32-bit, non-prefetchable) [disabled] [size=512K]
>         Capabilities: [d0] Power Management version 2
> 
> 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
>         Subsystem: Intel Corporation DeskTop Board D945GTP
>         Flags: bus master, fast devsel, latency 0, IRQ 43
>         Memory at fdff8000 (64-bit, non-prefetchable) [size=16K]
>         Capabilities: [50] Power Management version 2
>         Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
>         Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
>         Capabilities: [100] Virtual Channel
>         Capabilities: [130] Root Complex Link
>         Kernel driver in use: snd_hda_intel
>         Kernel modules: snd_hda_intel
> 
> 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
>         Flags: bus master, fast devsel, latency 0, IRQ 40
>         Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>         I/O behind bridge: 0000c000-0000cfff [size=4K]
>         Memory behind bridge: fdb00000-fdbfffff [size=1M]
>         Prefetchable memory behind bridge: 00000000fd800000-00000000fd8fffff [size=1M]
>         Capabilities: [40] Express Root Port (Slot+), MSI 00
>         Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>         Capabilities: [90] Subsystem: Intel Corporation NM10/ICH7 Family PCI Express Port 1
>         Capabilities: [a0] Power Management version 2
>         Capabilities: [100] Virtual Channel
>         Capabilities: [180] Root Complex Link
>         Kernel driver in use: pcieport
> 
> 00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
>         Flags: bus master, fast devsel, latency 0, IRQ 41
>         Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>         I/O behind bridge: 0000e000-0000efff [size=4K]
>         Memory behind bridge: fdd00000-fddfffff [size=1M]
>         Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff [size=1M]
>         Capabilities: [40] Express Root Port (Slot+), MSI 00
>         Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>         Capabilities: [90] Subsystem: Intel Corporation NM10/ICH7 Family PCI Express Port 2
>         Capabilities: [a0] Power Management version 2
>         Capabilities: [100] Virtual Channel
>         Capabilities: [180] Root Complex Link
>         Kernel driver in use: pcieport
> 
> 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
>         Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller
>         Flags: bus master, medium devsel, latency 0, IRQ 23
>         I/O ports at fe00 [size=32]
>         Kernel driver in use: uhci_hcd
>         Kernel modules: uhci_hcd
> 
> 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
>         Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller
>         Flags: bus master, medium devsel, latency 0, IRQ 19
>         I/O ports at fd00 [size=32]
>         Kernel driver in use: uhci_hcd
>         Kernel modules: uhci_hcd
> 
> 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
>         Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller
>         Flags: bus master, medium devsel, latency 0, IRQ 18
>         I/O ports at fc00 [size=32]
>         Kernel driver in use: uhci_hcd
>         Kernel modules: uhci_hcd
> 
> 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
>         Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller
>         Flags: bus master, medium devsel, latency 0, IRQ 16
>         I/O ports at fb00 [size=32]
>         Kernel driver in use: uhci_hcd
>         Kernel modules: uhci_hcd
> 
> 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
>         Subsystem: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller
>         Flags: bus master, medium devsel, latency 0, IRQ 23
>         Memory at fdfff000 (32-bit, non-prefetchable) [size=1K]
>         Capabilities: [50] Power Management version 2
>         Capabilities: [58] Debug port: BAR=1 offset=00a0
>         Kernel driver in use: ehci-pci
>         Kernel modules: ehci_pci
> 
> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])
>         Flags: bus master, fast devsel, latency 0
>         Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
>         I/O behind bridge: 0000d000-0000dfff [size=4K]
>         Memory behind bridge: fda00000-fdafffff [size=1M]
>         Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff [size=1M]
>         Capabilities: [50] Subsystem: Intel Corporation 82801 Mobile PCI Bridge
> 
> 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
>         Subsystem: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge
>         Flags: bus master, medium devsel, latency 0
>         Capabilities: [e0] Vendor Specific Information: Len=0c <?>
>         Kernel driver in use: lpc_ich
>         Kernel modules: intel_rng, lpc_ich
> 
> 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
>         Subsystem: Intel Corporation 82801G (ICH7 Family) IDE Controller
>         Flags: bus master, medium devsel, latency 0, IRQ 18
>         I/O ports at 01f0 [size=8]
>         I/O ports at 03f4
>         I/O ports at 0170 [size=8]
>         I/O ports at 0374
>         I/O ports at fa00 [size=16]
>         Kernel driver in use: PIIX_IDE
>         Kernel modules: ata_piix, pata_acpi, ata_generic
> 
> 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
>         Subsystem: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode]
>         Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
>         I/O ports at f900 [size=8]
>         I/O ports at f800 [size=4]
>         I/O ports at f700 [size=8]
>         I/O ports at f600 [size=4]
>         I/O ports at f500 [size=16]
>         Memory at fdffe000 (32-bit, non-prefetchable) [size=1K]
>         Capabilities: [70] Power Management version 2
>         Kernel driver in use: ata_piix
>         Kernel modules: ata_piix, pata_acpi, ata_generic
> 
> 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
>         Subsystem: Intel Corporation NM10/ICH7 Family SMBus Controller
>         Flags: medium devsel, IRQ 19
>         I/O ports at 0500 [size=32]
>         Kernel driver in use: i801_smbus
>         Kernel modules: i2c_i801
> 
> 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
>         Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller
>         Flags: bus master, fast devsel, latency 0, IRQ 42
>         I/O ports at ce00 [size=256]
>         Memory at fdbff000 (64-bit, non-prefetchable) [size=4K]
>         Memory at fd8f0000 (64-bit, prefetchable) [size=64K]
>         Expansion ROM at fdbc0000 [disabled] [size=128K]
>         Capabilities: [40] Power Management version 3
>         Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
>         Capabilities: [70] Express Endpoint, MSI 01
>         Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
>         Capabilities: [d0] Vital Product Data
>         Capabilities: [100] Advanced Error Reporting
>         Capabilities: [140] Virtual Channel
>         Capabilities: [160] Device Serial Number 7f-02-00-00-68-4c-e0-00
>         Kernel driver in use: r8169
>         Kernel modules: r8168, r8169

Den r8168 hatte ich blacklistet weil damit keine gute Datenrate beim
streaming zustande kam.
> 
> 02:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) (prog-if 01 [AHCI 1.0])
>         Subsystem: JMicron Technology Corp. JMB363 SATA/IDE Controller
>         Flags: bus master, fast devsel, latency 0, IRQ 17
>         Memory at fddfe000 (32-bit, non-prefetchable) [size=8K]
>         Expansion ROM at fdde0000 [disabled] [size=64K]
>         Capabilities: [68] Power Management version 2
>         Capabilities: [50] Express Legacy Endpoint, MSI 01
>         Kernel driver in use: ahci
>         Kernel modules: ahci
> 
> 02:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) (prog-if 85 [Master SecO PriO])
>         Subsystem: JMicron Technology Corp. JMB363 SATA/IDE Controller
>         Flags: bus master, fast devsel, latency 0, IRQ 18
>         I/O ports at ef00 [size=8]
>         I/O ports at ee00 [size=4]
>         I/O ports at ed00 [size=8]
>         I/O ports at ec00 [size=4]
>         I/O ports at eb00 [size=16]
>         Capabilities: [68] Power Management version 2
>         Kernel driver in use: JMicron IDE
>         Kernel modules: pata_jmicron, pata_acpi, ata_generic

Brauche ich da wirklich ata_generic und pata_acpi, für S-ATA Platten
interfaces?

dmesg ausschnitt mit Region warning.

> mediabox 2.8.1 # dmesg |grep ACPI
> [    0.000000] BIOS-e820: [mem 0x000000003fde0000-0x000000003fde2fff] ACPI NVS
> [    0.000000] BIOS-e820: [mem 0x000000003fde3000-0x000000003fdeffff] ACPI data
> [    0.000000] ACPI: Early table checksum verification disabled
> [    0.000000] ACPI: RSDP 0x00000000000F77A0 000014 (v00 IntelR)
> [    0.000000] ACPI: RSDT 0x000000003FDE3000 000034 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
> [    0.000000] ACPI: FACP 0x000000003FDE3080 000074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
> [    0.000000] ACPI: DSDT 0x000000003FDE3100 0044C7 (v01 INTELR AWRDACPI 00001000 MSFT 03000000)
> [    0.000000] ACPI: FACS 0x000000003FDE0000 000040
> [    0.000000] ACPI: MCFG 0x000000003FDE7680 00003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
> [    0.000000] ACPI: APIC 0x000000003FDE7600 000068 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
> [    0.000000] ACPI: SSDT 0x000000003FDE7D20 000482 (v01 PmRef  CpuPm    00003000 INTL 20041203)
> [    0.000000] ACPI: Local APIC address 0xfee00000
> [    0.000000] ACPI: PM-Timer IO Port: 0x408
> [    0.000000] ACPI: Local APIC address 0xfee00000
> [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [    0.000000] ACPI: IRQ0 used by override.
> [    0.000000] ACPI: IRQ2 used by override.
> [    0.000000] ACPI: IRQ9 used by override.
> [    0.000000] Using ACPI (MADT) for SMP configuration information
> [    0.008268] ACPI: Core revision 20140424
> [    0.025609] ACPI: All ACPI Tables successfully acquired
> [    0.090089] PM: Registering ACPI NVS region [mem 0x3fde0000-0x3fde2fff] (12288 bytes)
> [    0.169933] ACPI: bus type PCI registered
> [    0.588514] ACPI: Added _OSI(Module Device)
> [    0.588514] ACPI: Added _OSI(Processor Device)
> [    0.588514] ACPI: Added _OSI(3.0 _SCP Extensions)
> [    0.588514] ACPI: Added _OSI(Processor Aggregator Device)
> [    0.604165] ACPI: Dynamic OEM Table Load:
> [    0.604354] ACPI: SSDT 0x00000000F68C5400 0002AE (v01 PmRef  Cpu0Ist  00003000 INTL 20041203)
> [    0.606263] ACPI: Dynamic OEM Table Load:
> [    0.606443] ACPI: SSDT 0x00000000F68D2600 000152 (v01 PmRef  Cpu1Ist  00003000 INTL 20041203)
> [    0.608267] ACPI: Interpreter enabled
> [    0.608372] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
> [    0.608589] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
> [    0.608834] ACPI: (supports S0 S3 S5)
> [    0.611960] ACPI: Using IOAPIC for interrupt routing
> [    0.612216] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [    0.642247] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [    0.646272] pci 0000:00:1b.0: System wakeup disabled by ACPI
> [    0.646792] pci 0000:00:1c.0: System wakeup disabled by ACPI
> [    0.648040] pci 0000:00:1c.1: System wakeup disabled by ACPI
> [    0.648574] pci 0000:00:1d.0: System wakeup disabled by ACPI
> [    0.649396] pci 0000:00:1d.1: System wakeup disabled by ACPI
> [    0.650159] pci 0000:00:1d.2: System wakeup disabled by ACPI
> [    0.650906] pci 0000:00:1d.3: System wakeup disabled by ACPI
> [    0.652037] pci 0000:00:1d.7: System wakeup disabled by ACPI
> [    0.652416] pci 0000:00:1e.0: System wakeup disabled by ACPI
> [    0.653263] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
> [    0.672216] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
> [    0.672216] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
> [    0.672216] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 9 10 11 12 14 15)
> [    0.672643] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 *15)
> [    0.673646] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
> [    0.674675] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
> [    0.675703] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
> [    0.676799] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
> [    0.681384] ACPI: Enabled 1 GPEs in block 00 to 1F
> [    0.683988] PCI: Using ACPI for IRQ routing
> [    0.698692] pnp: PnP ACPI init
> [    0.698833] ACPI: bus type PNP registered
> [    0.699988] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.699988] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
> [    0.699988] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
> [    0.701668] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.702958] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.704647] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
> [    0.704691] pnp: PnP ACPI: found 6 devices
> [    0.704765] ACPI: bus type PNP unregistered
> [    0.704860] PnPBIOS: Disabled by ACPI PNP
> [    1.360256] ACPI: Power Button [PWRB]
> [    1.380105] ACPI: Power Button [PWRF]
> [    1.389782] ACPI: Fan [FAN] (on)
> [    1.412028] ACPI: Thermal Zone [THRM] (29 C)
> [    5.037278] ACPI: bus type USB registered
> [   18.821882] apm: overridden by ACPI.
> [   20.351521] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000429-0x0000000000000429 (\PM2S) (20140424/utaddress-254)
> [   20.393772] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [   20.422268] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x00000000000004B8-0x00000000000004BB (\GPO2) (20140424/utaddress-254)
> [   20.466647] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [   20.497362] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x000000000000048C-0x000000000000048F (\GPO_) (20140424/utaddress-254)
> [   20.542710] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [   46.363403] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000295-0x0000000000000296 (\IP__) (20140424/utaddress-254)
> [   46.363435] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

Die Externe Platte und ???

> [   22.036756] scsi 4:0:0:0: Direct-Access     Hitachi  HUA722020ALA331       PQ: 0 ANSI: 0
> [   22.050355] sd 4:0:0:0: [sdc] 3907029167 512-byte logical blocks: (2.00 TB/1.81 TiB)
> [   22.068836] sd 4:0:0:0: [sdc] Write Protect is off
> [   22.079643] sd 4:0:0:0: [sdc] Mode Sense: 03 00 00 00
> [   22.090118] sd 4:0:0:0: [sdc] No Caching mode page found
> [   22.100574] sd 4:0:0:0: [sdc] Assuming drive cache: write through
> [   22.194748]  sdc: sdc1
> [   22.224862] sd 4:0:0:0: [sdc] Attached SCSI disk

Die no caching und assuming drive cache zeilen sind hier rot.

smartctl

> mediabox 2.8.1 # smartctl -a -d auto /dev/sdc
> smartctl 6.6 2017-11-05 r4594 [i686-linux-3.16.50-eisfair-1-SMP] (local build)
> Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
> 
> === START OF INFORMATION SECTION ===
> Model Family:     Hitachi Ultrastar A7K2000
> Device Model:     Hitachi HUA722020ALA331
> Serial Number:    YBKK0TAF
> LU WWN Device Id: 5 000cca 221f203c4
> Firmware Version: JKAOA3NH
> User Capacity:    2,000,398,934,016 bytes [2.00 TB]
> Sector Size:      512 bytes logical/physical
> Rotation Rate:    7200 rpm
> Form Factor:      3.5 inches
> Device is:        In smartctl database [for details use: -P show]
> ATA Version is:   ATA8-ACS T13/1699-D revision 4
> SATA Version is:  SATA 2.6, 3.0 Gb/s
> Local Time is:    Sat Jan  6 23:58:02 2018 CET
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
> 
> === START OF READ SMART DATA SECTION ===
> SMART Status not supported: Incomplete response, ATA output registers missing
> SMART overall-health self-assessment test result: PASSED
> Warning: This result is based on an Attribute check.
> 
> General SMART Values:
> Offline data collection status:  (0x84) Offline data collection activity
>                                         was suspended by an interrupting command from host.
>                                         Auto Offline Data Collection: Enabled.
> Self-test execution status:      (   0) The previous self-test routine completed
>                                         without error or no self-test has ever
>                                         been run.
> Total time to complete Offline
> data collection:                (22183) seconds.
> Offline data collection
> capabilities:                    (0x5b) SMART execute Offline immediate.
>                                         Auto Offline data collection on/off support.
>                                         Suspend Offline collection upon new
>                                         command.
>                                         Offline surface scan supported.
>                                         Self-test supported.
>                                         No Conveyance Self-test supported.
>                                         Selective Self-test supported.
> SMART capabilities:            (0x0003) Saves SMART data before entering
>                                         power-saving mode.
>                                         Supports SMART auto save timer.
> Error logging capability:        (0x01) Error logging supported.
>                                         General Purpose Logging supported.
> Short self-test routine
> recommended polling time:        (   1) minutes.
> Extended self-test routine
> recommended polling time:        ( 370) minutes.
> SCT capabilities:              (0x003d) SCT Status supported.
>                                         SCT Error Recovery Control supported.
>                                         SCT Feature Control supported.
>                                         SCT Data Table supported.
> 
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>   1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
>   2 Throughput_Performance  0x0005   131   131   054    Pre-fail  Offline      -       109
>   3 Spin_Up_Time            0x0007   123   123   024    Pre-fail  Always       -       570 (Average 604)
>   4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       763
>   5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       1
>   7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
>   8 Seek_Time_Performance   0x0005   116   116   020    Pre-fail  Offline      -       37
>   9 Power_On_Hours          0x0012   095   095   000    Old_age   Always       -       40387
>  10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
>  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       212
> 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       770
> 193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       770
> 194 Temperature_Celsius     0x0002   200   200   000    Old_age   Always       -       30 (Min/Max 22/58)
> 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       1
> 197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
> 198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
> 199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
> 
> SMART Error Log Version: 0
> No Errors Logged
> 
> SMART Self-test log structure revision number 1
> Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
> # 1  Short captive       Completed without error       00%     38165         -
> # 2  Short offline       Completed without error       00%     27102         -
> 
> SMART Selective self-test log data structure revision number 1
>  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>     1        0        0  Not_testing
>     2        0        0  Not_testing
>     3        0        0  Not_testing
>     4        0        0  Not_testing
>     5        0        0  Not_testing
> Selective self-test flags (0x0):
>   After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute delay.

Erst sollen Statusregister fehlen, aber die Platte hat doch welche,
oder? Und hddtemp sagt:

> mediabox 2.8.1 # hddtemp /dev/sdc
> /dev/sdc: Hitachi HUA722020ALA331: S.M.A.R.T. not available

aber smartctl zeigt die Temperatur an.

Der Vollständigkeit halber, der USB Bus.

> mediabox 2.8.1 # lsusb -t
> /:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
> /:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
> /:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
>     |__ Port 2: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
>     |__ Port 2: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
> /:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
> /:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
>     |__ Port 6: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 480M

Letzteres dürfte die Platte sein. Sonst hängt nur noch eine USB-Tastatur
dran.

Geladene Treiber:

> mediabox 2.8.1 # lsmod
> Module                  Size  Used by
> hwmon_vid               1684  0
> nfsd                  170571  13
> auth_rpcgss            30948  1 nfsd
> oid_registry            1591  1 auth_rpcgss
> nfs_acl                 1571  1 nfsd
> lockd                  43659  1 nfsd
> sunrpc                124146  18 nfsd,auth_rpcgss,lockd,nfs_acl
> ipv6                  211118  54
> isofs                  17515  0
> ide_cd_mod             20311  0
> cdrom                  18560  1 ide_cd_mod
> snd_hda_codec_realtek    42795  1
> snd_hda_codec_generic    34029  1 snd_hda_codec_realtek
> iTCO_wdt                3811  0
> iTCO_vendor_support     1308  1 iTCO_wdt
> uas                    13092  0
> snd_hda_intel          12116  0
> snd_hda_controller     12523  1 snd_hda_intel
> snd_pcsp                5478  0
> snd_hda_codec          56169  4 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
> snd_pcm                53839  4 snd_hda_codec,snd_hda_intel,snd_hda_controller,snd_pcsp
> usb_storage            35401  1 uas
> i2c_i801                7181  0
> snd_timer              12702  1 snd_pcm
> snd                    36182  7 snd_hda_codec_realtek,snd_timer,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_pcsp
> soundcore               3210  2 snd,snd_hda_codec
> coretemp                4044  0
> ahci                   22290  0
> i2c_core               14965  1 i2c_i801
> libahci                15337  1 ahci
> lpc_ich                11556  0
> pata_jmicron            1487  0
> ata_generic             2158  0
> mfd_core                1941  1 lpc_ich
> rng_core                2569  0
> evdev                   7000  0
> acpi_cpufreq            5158  0
> r8169                  41712  0
> mii                     2759  1 r8169
> ata_piix               18646  7
> pata_acpi               2083  0
> pata_sis                6802  0
> libata                119896  7 ahci,pata_acpi,libahci,pata_sis,ata_generic,ata_piix,pata_jmicron
> sd_mod                 23653  6
> scsi_mod               70552  4 uas,usb_storage,libata,sd_mod
> hid_cherry              1044  0
> hid_generic              669  0
> usbhid                 19308  0
> hid                    39470  3 hid_cherry,hid_generic,usbhid
> xhci_hcd               74454  0
> ohci_pci                2072  0
> ohci_hcd               14668  1 ohci_pci
> uhci_hcd               15985  0
> ehci_pci                2456  0
> ehci_hcd               30717  1 ehci_pci
> usbcore               108698  9 uas,uhci_hcd,usb_storage,ohci_hcd,ohci_pci,ehci_hcd,ehci_pci,usbhid,xhci_hcd
> usb_common              1068  1 usbcore
> psmouse                45881  0

und da habe ic parport_pc, ppdev u.a. schon per modprobe -r raus
genommen. Der hat auch keinen Parport. Kann ich die ggf. einfach
blacklisten und noch weitere aus dieser liste?

Vielen Dank schon mal für Tips und Rat dazu.

Kay
-- 
Sent via SN (Eisfair-1)


Mehr Informationen über die Mailingliste Eisfair