[Eisfair] E64 smartmon und disk/by-id

[Thomas Zweifel]

Mallo Marcus

Ich möchte beim smartmon auf die by-id Varianten umsteigen, allerdings 
will das nicht so richtig....

Activate configuration now (y/n) [yes]?
smartd monitors the following devices:
Drive '/dev/disk/by-id/ata-Hitachi_HDP725025GLA380_GEK230RBSNHA2A' 
doesn't seem to be a valid device!
  - SATA drive '/dev/sdb'
  - SATA drive '/dev/sdc'
  - SATA drive '/dev/sdd'
  - SATA drive '/dev/sde'
Configuration faulty; S.M.A.R.T. Monitoring support is disabled.
smartd is not running.
smartd is not running.
smartd not started because of misconfiguration. Please check your 
configuration.
Press ENTER to continue

eis2 # ll /dev/disk/by-id/ | grep 'sdc$'
lrwxrwxrwx 1 root root  9 Dec 26 13:36 
ata-Hitachi_HDP725025GLA380_GEK230RBSNHA2A -> ../../sdc
lrwxrwxrwx 1 root root  9 Dec 26 13:36 wwn-0x5000cca329d76874 -> ../../sdc

eis2 # grep 'sdc$' /proc/partitions
    8       32  244198584 sdc


Mache ich was falsch, oder ist das Feature noch nicht fertig?



Gruss Thomas