[Eisfair] Fehlermeldung beim Einsatz von rsync
Jürgen Witt
j-witt at web.de
Do Mär 7 19:41:27 CET 2019
Hallo Marcus,
Am 07.03.2019 um 19:14 schrieb Marcus Roeckrath:
> Hallo Jürgen,
>
>
> Achso, jetzt wird mir einiges klar, das Festplattenproblem besteht also auf
> dem Backup- und nicht dem Produktiv-Server.
genau, hatte ich auch die ganze Zeit verkehrt gesehen und Dir so weiter
gegeben.
>> Der Backup-Server
>
> Auch Raid?
ja, ein Software-Raid-1
>> Short report for drive '/dev/sdb'
>>
>> │196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
>> Always - 0
>>
>> │197 Current_Pending_Sector 0x0032 200 200 000 Old_age
>> Always - 1
>>
>> │198 Offline_Uncorrectable 0x0030 200 200 000 Old_age
>> Offline - 1
>
> Das passt aber irgendwie auch nicht, denn der Pending-Sektor müsste hier mit
> Count 001 stehen.
>
> Bitte mal
>
> smartctl -a /dev/sdb
>
> damit man auch die regelmäßigen Checkergebnisse angezeigt werden.
eis # smartctl -a /dev/sdb
smartctl 7.0 2018-12-30 r4883 [i686-linux-3.16.62-eisfair-1-PAE] (local
build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD20EFRX-68EUZN0
Serial Number: WD-WCC4M4KAJ4DT
LU WWN Device Id: 5 0014ee 20e77f9f4
Firmware Version: 82.00A82
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Mar 7 19:26:01 2019 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an
interrupting command from host.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 121) The previous self-test completed
having
the read element of the test
failed.
Total time to complete Offline
data collection: (27540) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 278) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x703d) SCT Status supported.
SCT Error Recovery Control
supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
Always - 2
3 Spin_Up_Time 0x0027 175 174 021 Pre-fail
Always - 4250
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 9
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age
Always - 0
9 Power_On_Hours 0x0032 082 082 000 Old_age
Always - 13766
10 Spin_Retry_Count 0x0032 100 253 000 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 9
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always
- 3
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always
- 193
194 Temperature_Celsius 0x0022 117 110 000 Old_age Always
- 30
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always
- 1
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age
Offline - 1
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age
Offline - 1
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 13749
25117256
# 2 Short offline Completed: read failure 90% 13725
25117256
# 3 Short offline Completed: read failure 90% 13701
25117256
# 4 Short offline Completed: read failure 90% 13677
25117256
# 5 Short offline Completed: read failure 90% 13653
25117256
# 6 Extended offline Completed: read failure 90% 13630
25117256
# 7 Short offline Completed: read failure 90% 13629
25117256
# 8 Short offline Completed: read failure 90% 13605
25117256
# 9 Short offline Completed: read failure 90% 13581
25117256
#10 Short offline Completed: read failure 90% 13557
25117256
#11 Short offline Completed: read failure 90% 13533
25117256
#12 Short offline Completed: read failure 90% 13437
25117256
#13 Short offline Completed: read failure 90% 13413
25117256
#14 Short offline Completed: read failure 90% 13389
25117256
#15 Short offline Completed: read failure 90% 13365
25117256
#16 Short offline Completed: read failure 90% 13341
25117256
#17 Short offline Completed: read failure 90% 13317
25117256
#18 Extended offline Completed: read failure 90% 13294
25117256
#19 Short offline Completed: read failure 90% 13293
25117256
#20 Short offline Completed: read failure 90% 13269
25117256
#21 Short offline Completed: read failure 90% 13245
25117256
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
> Ist schon auffällig, dass der Fehler in der Messages immer dann gemeldet
> wird, wenn auch rsync läuft.
das sieht wohl nur so aus, weil der Platten-Check immer :19 und :49 läuft.
Mar 5 23:19:19 eis smartd[5938]: Device: /dev/sdb [SAT], 1 Currently
unreadable (pending) sectors.
Mar 5 23:19:19 eis smartd[5938]: Device: /dev/sdb [SAT], 1 Offline
uncorrectable sectors.
Mar 5 23:30:00 eis fcron[28311]: Job '/usr/bin/server-sichern' started
for user root (pid 28320)
Mar 5 23:49:18 eis smartd[5938]: Device: /dev/sdb [SAT], 1 Currently
unreadable (pending) sectors.
Mar 5 23:49:19 eis smartd[5938]: Device: /dev/sdb [SAT], 1 Offline
uncorrectable sectors.
Mar 6 00:19:18 eis smartd[5938]: Device: /dev/sdb [SAT], 1 Currently
unreadable (pending) sectors.
Mar 6 00:19:18 eis smartd[5938]: Device: /dev/sdb [SAT], 1 Offline
uncorrectable sectors.
Mar 6 00:45:31 eis fcron[28311]: Job '/usr/bin/server-sichern' completed
Mar 6 00:49:18 eis smartd[5938]: Device: /dev/sdb [SAT], 1 Currently
unreadable (pending) sectors.
Mar 6 00:49:18 eis smartd[5938]: Device: /dev/sdb [SAT], 1 Offline
uncorrectable sectors.
die Nacht vorher (5. auf 6.3.) läuft der rsync ohne Fehler durch.
Mar 6 23:19:18 eis smartd[5938]: Device: /dev/sdb [SAT], 1 Currently
unreadable (pending) sectors.
Mar 6 23:19:18 eis smartd[5938]: Device: /dev/sdb [SAT], 1 Offline
uncorrectable sectors.
Mar 6 23:30:00 eis fcron[24120]: Job '/usr/bin/server-sichern' started
for user root (pid 24129)
Mar 6 23:49:18 eis smartd[5938]: Device: /dev/sdb [SAT], 1 Currently
unreadable (pending) sectors.
Mar 6 23:49:18 eis smartd[5938]: Device: /dev/sdb [SAT], 1 Offline
uncorrectable sectors.
Mar 7 00:19:18 eis smartd[5938]: Device: /dev/sdb [SAT], 1 Currently
unreadable (pending) sectors.
Mar 7 00:19:19 eis smartd[5938]: Device: /dev/sdb [SAT], 1 Offline
uncorrectable sectors.
Mar 7 00:49:18 eis smartd[5938]: Device: /dev/sdb [SAT], 1 Currently
unreadable (pending) sectors.
Mar 7 00:49:18 eis smartd[5938]: Device: /dev/sdb [SAT], 1 Offline
uncorrectable sectors.
Mar 7 00:51:04 eis fcron[24120]: Job '/usr/bin/server-sichern'
completed (mailing output)
vom 6. auf den 7.3. läuft er nicht durch
> Unlesbarer Sektor ist schon ernst zu nehmen.
>
> Oder die große Last verursacht da ein Problem während des Schreibens. Mal
> die Plattenanschlüsse neu gesteckt.
Was schlägst Du vor?
Gruß
Jürgen
Mehr Informationen über die Mailingliste Eisfair