[Eisfair] Brauche Hilfe mit geklonter hdd - lilo meckert

[Stefan Puschek]

Hallo Holger,
...
>> da steht ja die Hardware garnicht drin
>>
>> aber in der /etc/lilo.conf steht Käse drin:
>> lba32
>    boot = /dev/sda1
> # boot = /dev/disk/by-id/ata-WDC_WD20EFRX-68EUZN0_WD-WCC4M5VT3D4C

ich habe das also wie oben angepasst,

> Das Kernelupdate richtet das dann schon wieder ;-)

dann das Kernelpaket 3.48 drüberinstalliert, aber leider
...
Enter your searchstring (ENTER=Return, 0=Exit)? kernel
Downloading required packages ...
=> [####################] eiskernel-smp (3.48.0)...                    [ 
  OK  ]
Done!
Installation of: eiskernel-smp (3.48.0) ...
Saving your kernel configuration in /tmp/kernel-backup.tar:
  /boot
  /etc/lilo.conf
  /lib/modules/3.16.74-eisfair-1-SMP
  /System.map-3.16.74-eisfair-1-SMP
  /usr/src/linux-3.16.74-eisfair-1/dot-config-smp
  /usr/src/linux-3.16.74-eisfair-1/Module.symvers-smp
  /var/install/packages/eiskernel
  /var/install/packages/eiskernel-smp
Done.
Compressing /tmp/kernel-backup.tar to /tmp/kernel-backup.tar.gz ...
Found loaded SCSI/SATA/PATA module(s):
  ahci
Moving /boot/kernel to /boot/old-kernel ...
Moving /boot/initrd.gz to /boot/old-initrd.gz ...
Creating initramfs ...
New complete SCSI/SATA/PATA and dependend module(s) for initramfs:
  scsi_mod
  sd_mod
  libata
  libahci
  ahci
Copying sbinfiles:
  Copying /sbin/insmod to /tmp/initrd_mount.udnHAn6Ufz/sbin.
Done.
Copying libraries:
  Copying /lib/ld-linux.so.2 to /tmp/initrd_mount.udnHAn6Ufz/lib.
  Copying /lib/libc.so.6 to /tmp/initrd_mount.udnHAn6Ufz/lib.
  Copying /lib/libdl.so.2 to /tmp/initrd_mount.udnHAn6Ufz/lib.
  Copying /lib/libpthread.so.0 to /tmp/initrd_mount.udnHAn6Ufz/lib.
  Copying /lib/libz.so.1 to /tmp/initrd_mount.udnHAn6Ufz/lib.
  Copying /usr/lib/libcrypto.so.1.1 to /tmp/initrd_mount.udnHAn6Ufz/usr/lib.
  Copying /usr/lib/liblzma.so.5 to /tmp/initrd_mount.udnHAn6Ufz/usr/lib.
Done.
Running in physical environment, trying to add microcode updates ...
Adding Intel microcode updates to initramfs ...
Installing new initrd.gz to /boot/initrd.gz ...
Installing new kernel to /boot/kernel ...
Saving old /etc/lilo.conf to /etc/lilo.conf.OLD ...
Running kernel 3.16.74-eisfair-1-SMP is not in fallback list ...
max-partitions is not set, dont trying to convert disk to 
/dev/disk/by-id/ ...

Cannot convert boot device /dev/sda1 to /dev/disk/by-id/!


Restoring your old kernel configuration ...
Added eis  *
Added oldeis
Done.
Kernel update failed!
Installation canceled by /tmp/install.sh: eiskernel-smp (3.48.0)!
Failed to install: eiskernel-smp (3.48.0)!
error: installation aborted!
Press ENTER to continue
...

was nun?

Groetjes
Stefan