[Eisfair] udev eth0 - eth1/base config vs. realitas
D. Oezbilen
oezbilen at gmx.net
Do Nov 28 22:34:10 CET 2019
Hallo Marcus,
hier die angefordeten Ausgaben, dmesg. messages bietet nicht mehr.
Am 28.11.2019 um 21:14 schrieb Marcus Roeckrath:
> Bitte die Ausgabe von dmesg und auch den passenden Abschnitt zum Boot
> aus /var/log/messages (ab Start von udevd: "<30>udevd[xxxx]: starting
> version 3.2.8"
Jepp, es gibt im dmesg Belege, dass er scheitert. => s. !!-----
Was moeglich waere(?) ueber das Bios die FW und/oder die IRQ Reihenfolge
zu aendern.
Update: Geschaut nogo, kann im Bios nicht IRQ/Reihenfolge einstellen.
#################### eis-boot ###################
[ 10.824783] udevd[1745]: starting version 3.2.8
[ 10.940337] udevd[1747]: starting eudev-3.2.8
[ 11.171379] mei_me 0000:00:16.0: irq 73 for MSI/MSI-X
[ 11.307791] scsi6 : ata_generic
[ 11.319738] scsi7 : ata_generic
[ 11.330286] ata7: PATA max UDMA/100 cmd 0xf0b0 ctl 0xf0a0 bmdma
0xf070 irq 18
[ 11.345112] ata8: PATA max UDMA/100 cmd 0xf090 ctl 0xf080 bmdma
0xf078 irq 18
[ 11.360094] pps_core: LinuxPPS API ver. 1 registered
[ 11.360548] wmi: Mapper loaded
[ 11.369230] ACPI Warning: SystemIO range
0x000000000000F000-0x000000000000F01F conflicts with OpRegion
0x000000000000F000-0x000000000000F01F (\_SB_.PCI0.SMB_.SMIO)
(20140424/utaddress-254)
[ 11.369233] ACPI Warning: SystemIO range
0x000000000000F000-0x000000000000F01F conflicts with OpRegion
0x000000000000F000-0x000000000000F01F (\_SB_.PCI0.SMB_.SMIO)
(20140424/utaddress-254)
[ 11.369234] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 11.413648] firewire_ohci 0000:09:05.0: added OHCI v1.0 device as
card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 11.474083] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
[ 11.474095] isci 0000:02:00.0: driver configured for rev: 5 silicon
[ 11.474097] isci 0000:02:00.0: OEM parameter table found in OROM
[ 11.474099] isci 0000:02:00.0: OEM SAS parameters (version: 1.1)
loaded (platform)
[ 11.474223] isci 0000:02:00.0: SCU controller 0: phy 3-0 cables:
{short, short, short, short}
[ 11.476415] scsi8 : isci
[ 11.476624] isci 0000:02:00.0: irq 74 for MSI/MSI-X
[ 11.476628] isci 0000:02:00.0: irq 75 for MSI/MSI-X
[ 11.493775] snd_hda_intel 0000:00:1b.0: irq 76 for MSI/MSI-X
[ 11.607720] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti at linux.it>
[ 11.636383] PTP clock support registered
[ 11.901805] sr0: scsi3-mmc drive: 12x/40x cd/rw xa/form2 cdda tray
[ 11.913913] firewire_core 0000:09:05.0: created device fw0: GUID
0060b0000094bef0, S400
[ 11.931971] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 11.945319] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 11.945537] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 11.987497] e1000e: Intel(R) PRO/1000 Network Driver - 3.4.2.1-NAPI
[ 12.001637] e1000e: Copyright(c) 1999 - 2018 Intel Corporation.
[ 12.015519] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec)
set to dynamic conservative mode
[ 12.041997] e1000e 0000:00:19.0: irq 77 for MSI/MSI-X
[ 12.042798] Intel(R) Gigabit Ethernet Linux Driver - version 5.3.5.20
[ 12.057368] Copyright(c) 2007 - 2018 Intel Corporation.
[ 12.070979] igb 0000:06:00.0: irq 78 for MSI/MSI-X
[ 12.070982] igb 0000:06:00.0: irq 79 for MSI/MSI-X
[ 12.140453] e1000e 0000:00:19.0 (unregistered net_device): registered
PHC clock
[ 12.155528] igb 0000:06:00.0: added PHC on eth0
[ 12.155530] igb 0000:06:00.0: Intel(R) Gigabit Ethernet Linux Driver
[ 12.155532] igb 0000:06:00.0: eth0: (PCIe:5.0GT/s:Width x4)
[ 12.155534] igb 0000:06:00.0 eth0: MAC: 00:aa:21:69:46:a4
[ 12.155618] igb 0000:06:00.0: eth0: PBA No: E81600-006
[ 12.155619] igb 0000:06:00.0: LRO is disabled
[ 12.155621] igb 0000:06:00.0: Using MSI-X interrupts. 1 rx queue(s),
1 tx queue(s)
[ 12.156063] igb 0000:06:00.1: irq 80 for MSI/MSI-X
[ 12.156067] igb 0000:06:00.1: irq 81 for MSI/MSI-X
[ 12.234677] igb 0000:06:00.1: added PHC on eth1
[ 12.234679] igb 0000:06:00.1: Intel(R) Gigabit Ethernet Linux Driver
[ 12.234681] igb 0000:06:00.1: eth1: (PCIe:5.0GT/s:Width x4)
[ 12.234684] igb 0000:06:00.1 eth1: MAC: 00:aa:21:69:46:a5
[ 12.234766] igb 0000:06:00.1: eth1: PBA No: E81600-006
[ 12.234768] igb 0000:06:00.1: LRO is disabled
[ 12.234770] igb 0000:06:00.1: Using MSI-X interrupts. 1 rx queue(s),
1 tx queue(s)
[ 12.235181] igb 0000:06:00.2: irq 82 for MSI/MSI-X
[ 12.235185] igb 0000:06:00.2: irq 83 for MSI/MSI-X
[ 12.314673] igb 0000:06:00.2: added PHC on eth2
[ 12.314674] igb 0000:06:00.2: Intel(R) Gigabit Ethernet Linux Driver
[ 12.314676] igb 0000:06:00.2: eth2: (PCIe:5.0GT/s:Width x4)
[ 12.314679] igb 0000:06:00.2 eth2: MAC: 00:aa:21:69:46:a6
[ 12.314759] igb 0000:06:00.2: eth2: PBA No: E81600-006
[ 12.314760] igb 0000:06:00.2: LRO is disabled
[ 12.314762] igb 0000:06:00.2: Using MSI-X interrupts. 1 rx queue(s),
1 tx queue(s)
[ 12.315148] igb 0000:06:00.3: irq 84 for MSI/MSI-X
[ 12.315152] igb 0000:06:00.3: irq 85 for MSI/MSI-X
[ 12.394811] igb 0000:06:00.3: added PHC on eth3
[ 12.394813] igb 0000:06:00.3: Intel(R) Gigabit Ethernet Linux Driver
[ 12.394815] igb 0000:06:00.3: eth3: (PCIe:5.0GT/s:Width x4)
[ 12.394818] igb 0000:06:00.3 eth3: MAC: 00:aa:21:69:46:a7
[ 12.394898] igb 0000:06:00.3: eth3: PBA No: E81600-006
[ 12.394900] igb 0000:06:00.3: LRO is disabled
[ 12.394902] igb 0000:06:00.3: Using MSI-X interrupts. 1 rx queue(s),
1 tx queue(s)
[ 12.505718] iTCO_vendor_support: vendor-support=0
[ 12.534793] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 12.546000] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled
by hardware/BIOS
---------------------------------
eth4 fuer onboard ist klar, erst die Quad-NIC, etho/1/2/3 -> 4 fuer onboard.
Dann aber scheitert er umzubenennen.
---------------------------------
[ 12.584201] e1000e 0000:00:19.0 eth4: (PCI Express:2.5GT/s:Width x1)
88:aa:fb:5d:83:8b
[ 12.597664] e1000e 0000:00:19.0 eth4: Intel(R) PRO/1000 Network
Connection
[ 12.609984] e1000e 0000:00:19.0 eth4: MAC: 10, PHY: 11, PBA No:
0100FF-0FF
[ 12.632463] sound hdaudioC0D0: autoconfig: line_outs=1
(0x15/0x0/0x0/0x0/0x0) type:line
[ 12.646527] sound hdaudioC0D0: speaker_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 12.659161] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
!!---------------------------------
[ 12.659740] udevd[1765]: Error changing net interface name eth4 to
eth0: File exists
[ 12.659757] udevd[1765]: could not rename interface '6' from 'eth4'
to 'eth0': File exists
!!---------------------------------
[ 12.699556] sound hdaudioC0D0: mono: mono_out=0x0
[ 12.710798] sound hdaudioC0D0: inputs:
[ 12.720872] sound hdaudioC0D0: Front Mic=0x19
[ 12.731775] sound hdaudioC0D0: Rear Mic=0x18
!!---------------------------------
[ 12.732767] udevd[1763]: Error changing net interface name eth0 to
eth1: File exists
[ 12.732784] udevd[1763]: could not rename interface '2' from 'eth0'
to 'eth1': File exists
!!---------------------------------
[ 12.771200] sound hdaudioC0D0: Line=0x1a
[ 13.074614] input: HP WMI hotkeys as /devices/virtual/input/input8
[ 13.343612] Adding 1048572k swap on /dev/sda2. Priority:-1 extents:1
across:1048572k FS
[ 13.379152] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 13.638973] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 13.750114] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: errors=remount-ro
[ 13.774853] XFS (sda5): Mounting V4 Filesystem
[ 14.237580] XFS (sda5): Ending clean mount
[ 14.277437] EXT4-fs (sda4): re-mounted. Opts:
errors=remount-ro,acl,user_xattr
[ 15.419742] ide-cd driver 5.00
[ 18.253459] igb 0000:06:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps
Full Duplex, Flow Control: RX/TX
[ 22.627617] NET: Registered protocol family 10
[ 27.121338] RPC: Registered named UNIX socket transport module.
[ 27.121342] RPC: Registered udp transport module.
[ 27.121343] RPC: Registered tcp transport module.
[ 27.121345] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 27.242850] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 28.232232] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
recovery directory
[ 28.242814] NFSD: starting 90-second grace period (net ffffffff8185a340)
[ 30.844392] CAPI 2.0 started up with major 68 (middleware)
[ 30.900320] fcusb2: AVM FRITZ!Card USB v2 driver, revision 0.6.5
[ 30.900323] fcusb2: -- 64 bit CAPI driver --
[ 30.900324] fcusb2: Loading...
[ 30.900352] <6>fcusb2: Driver 'fcusb2' attached to fcusb2-stack. (304)
[ 30.900395] kcapi: controller [001]: fcusb2-0004 attached
[ 30.900427] usbcore: registered new interface driver fcusb2
[ 30.900429] fcusb2: Loaded.
[ 30.992136] fcusb2: Stack version 3.11-07
[ 30.992171] kcapi: controller [001] "fcusb2-0004" ready.
[ 31.036313] ISDN subsystem Rev:
1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
[ 31.061774] capidrv-1: now up (2 B channels)
[ 31.061778] capidrv-1: D2 trace enabled
#################################################
Danke
Oez.
Mehr Informationen über die Mailingliste Eisfair