[Eisfair] Raidpartition wird nicht mehr gemountet und Eisfair config läßt sich nicht mehr editieren
Marcus Roeckrath
marcus.roeckrath at gmx.de
Fr Okt 25 10:43:08 CEST 2019
Hallo,
Marcus Roeckrath wrote:
>> Habe Dir die messages und dmesg per Mail geschickt.
Vielleicht übersehe ich ja etwas, daher hier mal die etwas längliche Ausgabe
von dmesg; der Initprozess wird angesprungen, da udev (kommt vor dem
(Re-)Mounten der Partitionen) und Netzwerk kommt nachher) durchgeführt
werden.
Aber /etc/init.d/swap und /etc/init.d/mountfs laufen nicht richtig.
Im Vergleich zu einem meiner ähnlichen Systeme, fällt mir an der
dmesg-Ausgabe nichts direkt negativ auf:
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.16.63-eisfair-1-SMP (root at kernel316) (gcc
version 8.1.1 20180719 [gcc-8-branch revision 262874] (eisfair Linux) ) #1
SMP Wed Mar 6 21:02:12 CET 2019
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001f7cffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001f7d0000-0x000000001f7ddfff] ACPI
data
[ 0.000000] BIOS-e820: [mem 0x000000001f7de000-0x000000001f7fffff] ACPI
NVS
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff]
reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled:
non-PAE kernel!
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: FUJITSU SIEMENS SCALEO Home Server/SS4200-E, BIOS V090L
12/19/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1f7d0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 01F800000 mask FFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at
[c00ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x1f000000-0x1f3fffff]
[ 0.000000] [mem 0x1f000000-0x1f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x18000000-0x1effffff]
[ 0.000000] [mem 0x18000000-0x1effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x17ffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x17ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1f400000-0x1f7cffff]
[ 0.000000] [mem 0x1f400000-0x1f7cffff] page 4k
[ 0.000000] BRK [0x016bb000, 0x016bbfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x00cbc000-0x00efffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F9630 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x000000001F7D0100 000044 (v01 121907 XSDT1340
20071219 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000001F7D0290 0000F4 (v03 121907 FACP1340
20071219 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000001F7D0440 0045C1 (v01 SLR SLR00106
00000001 INTL 20061109)
[ 0.000000] ACPI: FACS 0x000000001F7DE000 000040
[ 0.000000] ACPI: FACS 0x000000001F7DE000 000040
[ 0.000000] ACPI: APIC 0x000000001F7D0390 00006C (v01 121907 APIC1340
20071219 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x000000001F7D0400 00003C (v01 121907 OEMMCFG
20071219 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000001F7DE040 000061 (v01 121907 OEMB1340
20071219 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 503MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1f7d0000
[ 0.000000] low ram: 0 - 1f7d0000
[ 0.000000] BRK [0x016bc000, 0x016bcfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x1f7cffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1f7cffff]
[ 0.000000] On node 0 totalpages: 128878
[ 0.000000] free_area_init_node: node 0, pgdat c15e4900, node_mem_map
df3e0020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 976 pages used for memmap
[ 0.000000] Normal zone: 124880 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics stolen memory at
0x1f800000-0x1fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 3 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] e820: [mem 0x20000000-0xefffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @df3ac000 s27456 r0 d21696
u49152
[ 0.000000] pcpu-alloc: s27456 r0 d21696 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 127870
[ 0.000000] Kernel command line: auto BOOT_IMAGE=eis ro root=903
raid=noautodetect net.ifnames=0
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 501572K/515512K available (4527K kernel code, 249K
rwdata, 1276K rodata, 448K init, 324K bss, 13940K reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xdffd0000 - 0xff7fe000 ( 504 MB)
lowmem : 0xc0000000 - 0xdf7d0000 ( 503 MB)
.init : 0xc15ec000 - 0xc165c000 ( 448 kB)
.data : 0xc146bfb0 - 0xc15ea480 (1529 kB)
.text : 0xc1000000 - 0xc146bfb0 (4527 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=dec08000 soft=dec0a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1600.165 MHz processor
[ 0.004003] Calibrating delay loop (skipped), value calculated using
timer frequency.. 3200.33 BogoMIPS (lpj=6400660)
[ 0.004102] pid_max: default: 32768 minimum: 301
[ 0.004157] ACPI: Core revision 20140424
[ 0.010539] ACPI: All ACPI Tables successfully acquired
[ 0.010690] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.010741] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.011111] Initializing cgroup subsys net_cls
[ 0.011183] mce: CPU supports 6 MCE banks
[ 0.011237] CPU0: Thermal monitoring enabled (TM2)
[ 0.011286] process: using mwait in idle threads
[ 0.011342] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.011408] Spectre V2 : Mitigation: Full generic retpoline
[ 0.011457] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB
on context switch
[ 0.011508] Speculative Store Bypass: Vulnerable
[ 0.011556] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
[ 0.018751] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.019179] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.058922] smpboot: CPU0: Intel(R) Celeron(R) CPU 420 @
1.60GHz (fam: 06, model: 16, stepping: 01)
[ 0.060000] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events,
Intel PMU driver.
[ 0.060000] ... version: 2
[ 0.060000] ... bit width: 40
[ 0.060000] ... generic registers: 2
[ 0.060000] ... value mask: 000000ffffffffff
[ 0.060000] ... max period: 000000007fffffff
[ 0.060000] ... fixed-purpose events: 3
[ 0.060000] ... event mask: 0000000700000003
[ 0.060000] x86: Booted up 1 node, 1 CPUs
[ 0.060000] smpboot: Total of 1 processors activated (3200.33 BogoMIPS)
[ 0.060000] devtmpfs: initialized
[ 0.060000] PM: Registering ACPI NVS region [mem 0x1f7de000-0x1f7fffff]
(139264 bytes)
[ 0.060000] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.060000] xor: measuring software checksum speed
[ 0.096004] pIII_sse : 5549.000 MB/sec
[ 0.136003] prefetch64-sse: 6242.000 MB/sec
[ 0.136050] xor: using function: prefetch64-sse (6242.000 MB/sec)
[ 0.136211] NET: Registered protocol family 16
[ 0.136459] cpuidle: using governor ladder
[ 0.136511] cpuidle: using governor menu
[ 0.136657] ACPI: bus type PCI registered
[ 0.136779] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.136844] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.136894] PCI: Using MMCONFIG for extended config space
[ 0.136941] PCI: Using configuration type 1 for base access
[ 0.204009] raid6: mmxx1 2132 MB/s
[ 0.272006] raid6: mmxx2 2390 MB/s
[ 0.340002] raid6: sse1x1 1316 MB/s
[ 0.408027] raid6: sse1x2 1731 MB/s
[ 0.476010] raid6: sse2x1 2431 MB/s
[ 0.544016] raid6: sse2x2 2953 MB/s
[ 0.544063] raid6: using algorithm sse2x2 (2953 MB/s)
[ 0.544110] raid6: using ssse3x1 recovery algorithm
[ 0.544219] ACPI: Added _OSI(Module Device)
[ 0.544266] ACPI: Added _OSI(Processor Device)
[ 0.544314] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.544361] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.546328] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.549388] ACPI: Interpreter enabled
[ 0.549458] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S2_] (20140424/hwxface-580)
[ 0.549602] ACPI: (supports S0 S1 S3 S5)
[ 0.549650] ACPI: Using IOAPIC for interrupt routing
[ 0.549755] PCI: Ignoring host bridge windows from ACPI; if necessary,
use "pci=use_crs" and report a bug
[ 0.557315] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.557381] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI]
[ 0.557827] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER
PCIeCapability]
[ 0.558050] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
(ignored)
[ 0.558054] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff]
(ignored)
[ 0.558057] acpi PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff] (ignored)
[ 0.558060] acpi PNP0A08:00: host bridge window [mem
0x000d0000-0x000dffff] (ignored)
[ 0.558063] acpi PNP0A08:00: host bridge window [mem
0x1f800000-0xffffffff] (ignored)
[ 0.558066] PCI: root bus 00: using default resources
[ 0.558071] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000
[bus 00-3f] only partially covers this bridge
[ 0.558180] PCI host bridge to bus 0000:00
[ 0.558230] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.558915] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.558965] pci_bus 0000:00: root bus resource [mem
0x00000000-0xffffffff]
[ 0.559030] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[ 0.559171] pci 0000:00:02.0: [8086:2772] type 00 class 0x030000
[ 0.559186] pci 0000:00:02.0: reg 0x10: [mem 0xffa80000-0xffafffff]
[ 0.559194] pci 0000:00:02.0: reg 0x14: [io 0xec00-0xec07]
[ 0.559202] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff pref]
[ 0.559210] pci 0000:00:02.0: reg 0x1c: [mem 0xffa40000-0xffa7ffff]
[ 0.559372] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.559466] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.559530] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.559642] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[ 0.559733] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.559795] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.559910] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.559958] pci 0000:00:1d.0: reg 0x20: [io 0xe000-0xe01f]
[ 0.560078] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.560188] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.560236] pci 0000:00:1d.1: reg 0x20: [io 0xdc00-0xdc1f]
[ 0.560335] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.560449] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.560496] pci 0000:00:1d.2: reg 0x20: [io 0xd880-0xd89f]
[ 0.560596] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.560712] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.560759] pci 0000:00:1d.3: reg 0x20: [io 0xd800-0xd81f]
[ 0.560860] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.560979] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.561002] pci 0000:00:1d.7: reg 0x10: [mem 0xffa3f800-0xffa3fbff]
[ 0.561098] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.561159] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.561272] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.561374] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.561484] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.561580] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.561590] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6
ACPI/GPIO/TCO
[ 0.561645] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6
GPIO
[ 0.561698] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00
(mask 00ff)
[ 0.561886] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[ 0.561906] pci 0000:00:1f.2: reg 0x10: [io 0xe880-0xe887]
[ 0.561916] pci 0000:00:1f.2: reg 0x14: [io 0xe800-0xe803]
[ 0.561926] pci 0000:00:1f.2: reg 0x18: [io 0xe480-0xe487]
[ 0.561936] pci 0000:00:1f.2: reg 0x1c: [io 0xe400-0xe403]
[ 0.561945] pci 0000:00:1f.2: reg 0x20: [io 0xe080-0xe08f]
[ 0.561955] pci 0000:00:1f.2: reg 0x24: [mem 0xffa3fc00-0xffa3ffff]
[ 0.561999] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.562109] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.562166] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.562375] pci 0000:01:00.0: [8086:108b] type 00 class 0x020000
[ 0.562408] pci 0000:01:00.0: reg 0x10: [mem 0xff6e0000-0xff6fffff]
[ 0.562444] pci 0000:01:00.0: reg 0x18: [io 0xbc00-0xbc1f]
[ 0.562612] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.562696] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 0.562771] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.562822] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
[ 0.562827] pci 0000:00:1c.0: bridge window [mem 0xff600000-0xff6fffff]
[ 0.562923] pci 0000:02:00.0: [1095:3132] type 00 class 0x018000
[ 0.562957] pci 0000:02:00.0: reg 0x10: [mem 0xff8ffc00-0xff8ffc7f 64bit]
[ 0.562981] pci 0000:02:00.0: reg 0x18: [mem 0xff8f8000-0xff8fbfff 64bit]
[ 0.562997] pci 0000:02:00.0: reg 0x20: [io 0xcc00-0xcc7f]
[ 0.563026] pci 0000:02:00.0: reg 0x30: [mem 0xff800000-0xff87ffff pref]
[ 0.563106] pci 0000:02:00.0: supports D1 D2
[ 0.563164] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 0.563237] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.563287] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
[ 0.563293] pci 0000:00:1c.2: bridge window [mem 0xff700000-0xff8fffff]
[ 0.563385] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.563445] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff]
(subtractive decode)
[ 0.563448] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff]
(subtractive decode)
[ 0.563473] pci_bus 0000:00: on NUMA node 0
[ 0.564361] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14
15)
[ 0.564893] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14
15) *0, disabled.
[ 0.565489] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14
15)
[ 0.566016] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14
15)
[ 0.566542] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14
15) *0, disabled.
[ 0.567137] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14
15) *0, disabled.
[ 0.567731] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14
15) *0, disabled.
[ 0.568327] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14
15)
[ 0.568850] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.572396] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.572455] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.572509] vgaarb: loaded
[ 0.572555] vgaarb: bridge control possible 0000:00:02.0
[ 0.572828] PCI: Using ACPI for IRQ routing
[ 0.574552] PCI: pci_cache_line_size set to 64 bytes
[ 0.574606] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.574608] e820: reserve RAM buffer [mem 0x1f7d0000-0x1fffffff]
[ 0.575046] hpet clockevent registered
[ 0.575051] HPET: 3 timers in total, 0 timers will be used for per-cpu
timer
[ 0.575164] amd_nb: Cannot enumerate AMD northbridges
[ 0.575234] Switched to clocksource hpet
[ 0.575407] pnp: PnP ACPI init
[ 0.575464] ACPI: bus type PNP registered
[ 0.575602] system 00:00: [mem 0xfed13000-0xfed19fff] has been reserved
[ 0.575655] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.575769] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.575769] pnp 00:02: [dma 0 disabled]
[ 0.575769] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.575769] system 00:03: [io 0x0a00-0x0a7f] has been reserved
[ 0.575769] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.575769] system 00:04: [io 0x0170-0x0177] has been reserved
[ 0.575769] system 00:04: [io 0x0376] has been reserved
[ 0.575769] system 00:04: [io 0x01f0-0x01f7] has been reserved
[ 0.575769] system 00:04: [io 0x03f6] has been reserved
[ 0.575769] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.575769] system 00:04: [io 0x0800-0x087f] has been reserved
[ 0.575769] system 00:04: [io 0x0480-0x04bf] has been reserved
[ 0.575769] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.575769] system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.575769] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.575769] system 00:05: [mem 0xffc00000-0xfff7ffff] has been reserved
[ 0.575769] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.575769] system 00:06: [mem 0xfec00000-0xfec00fff] could not be
reserved
[ 0.575769] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.575769] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.575769] system 00:07: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.575769] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.575769] system 00:08: [mem 0x00000000-0x0009ffff] could not be
reserved
[ 0.575769] system 00:08: [mem 0x000c0000-0x000cffff] could not be
reserved
[ 0.575769] system 00:08: [mem 0x000e0000-0x000fffff] could not be
reserved
[ 0.575769] system 00:08: [mem 0x00100000-0x1f7fffff] could not be
reserved
[ 0.575769] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.575769] pnp: PnP ACPI: found 9 devices
[ 0.575769] ACPI: bus type PNP unregistered
[ 0.575769] PnPBIOS: Disabled by ACPI PNP
[ 0.612795] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff
64bit pref] to [bus 01] add_size 200000
[ 0.612809] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff
64bit pref] to [bus 02] add_size 200000
[ 0.612826] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit
pref] get_res_add_size add_size 200000
[ 0.612830] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit
pref] get_res_add_size add_size 200000
[ 0.612839] pci 0000:00:1c.0: BAR 9: assigned [mem 0x20000000-0x201fffff
64bit pref]
[ 0.612899] pci 0000:00:1c.2: BAR 9: assigned [mem 0x20200000-0x203fffff
64bit pref]
[ 0.612952] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.613002] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
[ 0.613056] pci 0000:00:1c.0: bridge window [mem 0xff600000-0xff6fffff]
[ 0.613109] pci 0000:00:1c.0: bridge window [mem 0x20000000-0x201fffff
64bit pref]
[ 0.613166] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.613216] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
[ 0.613269] pci 0000:00:1c.2: bridge window [mem 0xff700000-0xff8fffff]
[ 0.613322] pci 0000:00:1c.2: bridge window [mem 0x20200000-0x203fffff
64bit pref]
[ 0.613379] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.613438] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.613441] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.613444] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.613447] pci_bus 0000:01: resource 1 [mem 0xff600000-0xff6fffff]
[ 0.613450] pci_bus 0000:01: resource 2 [mem 0x20000000-0x201fffff 64bit
pref]
[ 0.613453] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.613456] pci_bus 0000:02: resource 1 [mem 0xff700000-0xff8fffff]
[ 0.613459] pci_bus 0000:02: resource 2 [mem 0x20200000-0x203fffff 64bit
pref]
[ 0.613462] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
[ 0.613465] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff]
[ 0.613519] NET: Registered protocol family 2
[ 0.613876] TCP established hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.613938] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.614003] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.614077] TCP: reno registered
[ 0.614124] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.614180] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.614300] NET: Registered protocol family 1
[ 0.614376] pci 0000:00:02.0: Video device with shadowed ROM
[ 2.212039] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?)
01010001
[ 2.212366] PCI: CLS 32 bytes, default 64
[ 2.212456] Trying to unpack rootfs image as initramfs...
[ 2.280375] Freeing initrd memory: 2320K (c0cbc000 - c0f00000)
[ 2.280719] microcode: CPU0 sig=0x10661, pf=0x1, revision=0x43
[ 2.280921] microcode: Microcode Update Driver: v2.00
<tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 2.284782] VFS: Disk quotas dquot_6.5.2
[ 2.284914] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.285622] SGI XFS with ACLs, security attributes, realtime, large
block/inode numbers, no debug enabled
[ 2.286317] msgmni has been set to 984
[ 2.288557] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 252)
[ 2.288617] io scheduler noop registered
[ 2.288673] io scheduler cfq registered (default)
[ 2.288990] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 2.289213] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 2.289475] vga16fb: initializing
[ 2.289477] vga16fb: mapped to 0xc00a0000
[ 2.386761] Console: switching to colour frame buffer device 80x30
[ 2.474414] fb0: VGA16 VGA frame buffer device
[ 2.481080] input: Power Button
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 2.487600] ACPI: Power Button [PWRB]
[ 2.494057] input: Power Button
as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.500471] ACPI: Power Button [PWRF]
[ 2.507473] isapnp: Scanning for PnP cards...
[ 2.866681] isapnp: No Plug & Play device found
[ 2.887596] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.914046] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a
16550A
[ 2.924878] brd: module loaded
[ 2.930971] Uniform Multi-Platform E-IDE driver
[ 2.937797] ide-gd driver 1.18
[ 2.943920] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.952825] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.958870] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.964935] mousedev: PS/2 mouse device common for all mice
[ 2.970837] rtc_cmos 00:01: RTC can wake from S4
[ 2.976683] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.982312] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram,
hpet irqs
[ 2.988031] md: linear personality registered for level -1
[ 2.993723] md: raid0 personality registered for level 0
[ 2.999167] md: raid1 personality registered for level 1
[ 3.004610] md: raid10 personality registered for level 10
[ 3.010132] md: raid6 personality registered for level 6
[ 3.015396] md: raid5 personality registered for level 5
[ 3.020503] md: raid4 personality registered for level 4
[ 3.025460] md: multipath personality registered for level -4
[ 3.030622] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised:
dm-devel at redhat.com
[ 3.035876] TCP: cubic registered
[ 3.041022] Initializing XFRM netlink socket
[ 3.046252] NET: Registered protocol family 17
[ 3.051507] NET: Registered protocol family 15
[ 3.056471] Key type dns_resolver registered
[ 3.061471] Using IPI No-Shortcut mode
[ 3.066552] rtc_cmos 00:01: setting system clock to 2019-10-23 20:58:32
UTC (1571864312)
[ 3.280035] tsc: Refined TSC clocksource calibration: 1599.999 MHz
[ 4.284070] Switched to clocksource tsc
[ 5.952048] floppy0: no floppy controllers found
[ 5.956836] work still pending
[ 5.961933] Freeing unused kernel memory: 448K (c15ec000 - c165c000)
[ 5.966993] Write protecting the kernel text: 4528k
[ 5.972052] Write protecting the kernel read-only data: 1280k
[ 5.988156] ACPI: bus type USB registered
[ 5.992697] usbcore: registered new interface driver usbfs
[ 5.997344] usbcore: registered new interface driver hub
[ 6.002377] usbcore: registered new device driver usb
[ 6.008557] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.014821] ehci-pci: EHCI PCI platform driver
[ 6.019939] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 6.024940] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus
number 1
[ 6.030040] ehci-pci 0000:00:1d.7: debug port 1
[ 6.038988] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 6.039017] ehci-pci 0000:00:1d.7: irq 23, io mem 0xffa3f800
[ 6.052041] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 6.057069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.062142] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.067275] usb usb1: Product: EHCI Host Controller
[ 6.072465] usb usb1: Manufacturer: Linux 3.16.63-eisfair-1-SMP ehci_hcd
[ 6.077749] usb usb1: SerialNumber: 0000:00:1d.7
[ 6.083093] hub 1-0:1.0: USB hub found
[ 6.088042] hub 1-0:1.0: 8 ports detected
[ 6.094544] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.099478] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 6.104271] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[ 6.109061] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000
[ 6.113922] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.118723] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.123475] usb usb2: Product: UHCI Host Controller
[ 6.128275] usb usb2: Manufacturer: Linux 3.16.63-eisfair-1-SMP uhci_hcd
[ 6.133076] usb usb2: SerialNumber: 0000:00:1d.0
[ 6.138251] hub 2-0:1.0: USB hub found
[ 6.143286] hub 2-0:1.0: 2 ports detected
[ 6.148463] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 6.153279] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 3
[ 6.158295] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000dc00
[ 6.163325] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.168186] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.173000] usb usb3: Product: UHCI Host Controller
[ 6.177785] usb usb3: Manufacturer: Linux 3.16.63-eisfair-1-SMP uhci_hcd
[ 6.182585] usb usb3: SerialNumber: 0000:00:1d.1
[ 6.187727] hub 3-0:1.0: USB hub found
[ 6.192736] hub 3-0:1.0: 2 ports detected
[ 6.197755] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 6.202505] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 4
[ 6.207432] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880
[ 6.212548] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.217579] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.222498] usb usb4: Product: UHCI Host Controller
[ 6.227290] usb usb4: Manufacturer: Linux 3.16.63-eisfair-1-SMP uhci_hcd
[ 6.232022] usb usb4: SerialNumber: 0000:00:1d.2
[ 6.237008] hub 4-0:1.0: USB hub found
[ 6.241860] hub 4-0:1.0: 2 ports detected
[ 6.246889] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 6.251663] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 5
[ 6.256516] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d800
[ 6.261518] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.266513] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.271433] usb usb5: Product: UHCI Host Controller
[ 6.276226] usb usb5: Manufacturer: Linux 3.16.63-eisfair-1-SMP uhci_hcd
[ 6.280957] usb usb5: SerialNumber: 0000:00:1d.3
[ 6.285915] hub 5-0:1.0: USB hub found
[ 6.290770] hub 5-0:1.0: 2 ports detected
[ 6.297265] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.303421] ohci-pci: OHCI PCI platform driver
[ 6.313928] usbcore: registered new interface driver usbhid
[ 6.318792] usbhid: USB HID core driver
[ 6.329227] SCSI subsystem initialized
[ 6.339248] libata version 3.00 loaded.
[ 6.342812] ahci 0000:00:1f.2: version 3.0
[ 6.342990] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 6.343074] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf
impl SATA mode
[ 6.348217] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 6.354223] scsi0 : ahci
[ 6.359860] scsi1 : ahci
[ 6.365352] scsi2 : ahci
[ 6.370713] scsi3 : ahci
[ 6.375774] ata1: SATA max UDMA/133 abar m1024 at 0xffa3fc00 port 0xffa3fd00
irq 42
[ 6.381005] ata2: SATA max UDMA/133 abar m1024 at 0xffa3fc00 port 0xffa3fd80
irq 42
[ 6.386144] ata3: SATA max UDMA/133 abar m1024 at 0xffa3fc00 port 0xffa3fe00
irq 42
[ 6.391264] ata4: SATA max UDMA/133 abar m1024 at 0xffa3fc00 port 0xffa3fe80
irq 42
[ 6.716045] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.721085] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.725865] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.730518] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.735285] ata3.00: ATA-9: WDC WD20EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 6.739901] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 6.744584] ata1.00: ATA-9: WDC WD20EFRX-68EUZN0, 80.00A80, max UDMA/133
[ 6.749302] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 6.754130] ata4.00: ATA-9: WDC WD20EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 6.759147] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 6.764269] ata2.00: ATA-9: WDC WD20EFRX-68EUZN0, 80.00A80, max UDMA/133
[ 6.769408] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 6.774724] ata1.00: configured for UDMA/133
[ 6.780154] ata3.00: configured for UDMA/133
[ 6.785644] scsi 0:0:0:0: Direct-Access ATA WDC WD20EFRX-68E
0A80 PQ: 0 ANSI: 5
[ 6.791005] ata2.00: configured for UDMA/133
[ 6.796434] ata4.00: configured for UDMA/133
[ 6.801823] scsi 1:0:0:0: Direct-Access ATA WDC WD20EFRX-68E
0A80 PQ: 0 ANSI: 5
[ 6.807322] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00
TB/1.81 TiB)
[ 6.813025] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 6.819281] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00
TB/1.81 TiB)
[ 6.825193] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 6.831401] scsi 2:0:0:0: Direct-Access ATA WDC WD20EFRX-68E
0A82 PQ: 0 ANSI: 5
[ 6.838123] sd 0:0:0:0: [sda] Write Protect is off
[ 6.844942] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.845209] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00
TB/1.81 TiB)
[ 6.852183] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 6.859628] scsi 3:0:0:0: Direct-Access ATA WDC WD20EFRX-68E
0A82 PQ: 0 ANSI: 5
[ 6.867285] sd 1:0:0:0: [sdb] Write Protect is off
[ 6.875234] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.875304] sd 2:0:0:0: [sdc] Write Protect is off
[ 6.883141] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 6.883261] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.899795] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00
TB/1.81 TiB)
[ 6.908225] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[ 6.916717] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.934113] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.952253] sd 3:0:0:0: [sdd] Write Protect is off
[ 6.961542] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 6.961900] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.991170] sdc: unknown partition table
[ 7.000579] sdd: unknown partition table
[ 7.009853] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 7.018994] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 7.027980] sda: sda1 sda2 sda3 sda4
[ 7.037006] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.045732] sdb: sdb1 sdb2 sdb3 sdb4
[ 7.054347] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 7.063778] sata_sil24 0000:02:00.0: version 1.1
[ 7.064459] scsi4 : sata_sil24
[ 7.072470] scsi5 : sata_sil24
[ 7.080041] ata5: SATA max UDMA/100 host m128 at 0xff8ffc00 port 0xff8f8000
irq 18
[ 7.087515] ata6: SATA max UDMA/100 host m128 at 0xff8ffc00 port 0xff8fa000
irq 18
[ 9.172047] ata5: SATA link down (SStatus 0 SControl 0)
[ 11.256044] ata6: SATA link down (SStatus 0 SControl 0)
[ 13.611334] md: md1 stopped.
[ 13.618662] md: bind<sdb1>
[ 13.623502] md: bind<sda1>
[ 13.628178] md/raid1:md1: active with 2 out of 2 mirrors
[ 13.632724] created bitmap (1 pages) for device md1
[ 13.636931] md1: bitmap initialized from disk: read 1 pages, set 0 of 1
bits
[ 13.660366] md1: detected capacity change from 0 to 50266112
[ 13.670215] md1:
[ 13.712115] md: md2 stopped.
[ 13.719647] md: bind<sdb2>
[ 13.725029] md: bind<sda2>
[ 13.730273] md/raid1:md2: active with 2 out of 2 mirrors
[ 13.735608] created bitmap (1 pages) for device md2
[ 13.740826] md2: bitmap initialized from disk: read 1 pages, set 0 of 16
bits
[ 13.766592] md2: detected capacity change from 0 to 1073152000
[ 13.780579] md2: unknown partition table
[ 13.811949] md: md3 stopped.
[ 13.820299] md: bind<sdb3>
[ 13.826562] md: bind<sda3>
[ 13.832764] md/raid1:md3: active with 2 out of 2 mirrors
[ 13.839072] created bitmap (3 pages) for device md3
[ 13.845647] md3: bitmap initialized from disk: read 1 pages, set 0 of
4798 bits
[ 13.874281] md3: detected capacity change from 0 to 321988132864
[ 13.890124] md3: unknown partition table
[ 13.905447] random: nonblocking pool is initialized
[ 13.924984] md: md4 stopped.
[ 13.934222] md: bind<sdb4>
[ 13.941271] md: bind<sda4>
[ 13.947862] md/raid0:md4: md_size is 6551330816 sectors.
[ 13.954242] md: RAID0 configuration for md4 - 1 zone
[ 13.960386] md: zone0=[sda4/sdb4]
[ 13.966819] zone-offset= 0KB, device-offset= 0KB,
size=3275665408KB
[ 13.979768] md4: detected capacity change from 0 to 3354281377792
[ 13.987025] md4: unknown partition table
[ 14.050235] EXT3-fs (md3): error: couldn't mount because of unsupported
optional features (240)
[ 14.062731] EXT2-fs (md3): error: couldn't mount because of unsupported
optional features (240)
[ 14.129074] EXT4-fs (md3): mounted filesystem with ordered data mode.
Opts: (null)
[ 18.648983] apm: BIOS not found.
[ 18.743107] udevd[1425]: starting version 3.2.1
[ 19.104719] udevd[1426]: starting eudev-3.2.1
[ 19.929465] pps_core: LinuxPPS API ver. 1 registered
[ 19.934879] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giometti at linux.it>
[ 19.955224] PTP clock support registered
[ 20.011424] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 20.144110] intel_rng: FWH not detected
[ 20.164408] coretemp coretemp.0: Using relative temperature scale!
[ 20.208755] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 20.260480] ACPI Warning: SystemIO range
0x00000000000004B0-0x00000000000004BF conflicts with OpRegion
0x0000000000000480-0x00000000000004BF (\_SB_.PCI0.SBRG.GPIO)
(20140424/utaddress-254)
[ 20.275650] ACPI Warning: SystemIO range
0x00000000000004B0-0x00000000000004BF conflicts with OpRegion
0x0000000000000480-0x00000000000004BF (\_SB_.PCI0.SBRG.GPIO)
(20140424/utaddress-254)
[ 20.291721] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 20.303261] ACPI Warning: SystemIO range
0x0000000000000480-0x00000000000004AF conflicts with OpRegion
0x0000000000000480-0x00000000000004BF (\_SB_.PCI0.SBRG.GPIO)
(20140424/utaddress-254)
[ 20.322170] ACPI Warning: SystemIO range
0x0000000000000480-0x00000000000004AF conflicts with OpRegion
0x0000000000000480-0x00000000000004BF (\_SB_.PCI0.SBRG.GPIO)
(20140424/utaddress-254)
[ 20.341718] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 20.355771] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 20.365013] e1000e: Intel(R) PRO/1000 Network Driver - 3.4.2.1-NAPI
[ 20.372224] e1000e: Copyright(c) 1999 - 2018 Intel Corporation.
[ 20.379368] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set
to dynamic conservative mode
[ 20.393829] e1000e 0000:01:00.0: irq 43 for MSI/MSI-X
[ 20.624091] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1)
00:15:17:31:c3:11
[ 20.631722] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network
Connection
[ 20.639368] e1000e 0000:01:00.0 eth0: MAC: 2, PHY: 2, PBA No: FFFFFF-0FF
[ 20.893562] Error: Driver 'pcspkr' is already registered, aborting...
[ 21.402275] intel_rng: FWH not detected
[ 21.577650] Error: Driver 'pcspkr' is already registered, aborting...
[ 22.501967] iTCO_vendor_support: vendor-support=0
[ 22.512913] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 22.520202] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2,
TCOBASE=0x0860)
[ 22.568817] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 25.785872] ide-cd driver 5.00
[ 26.064890] usbcore: registered new interface driver usb-storage
[ 26.304419] e1000e 0000:01:00.0: irq 43 for MSI/MSI-X
[ 26.408130] e1000e 0000:01:00.0: irq 43 for MSI/MSI-X
[ 27.872982] NET: Registered protocol family 10
[ 27.876569] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.220986] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: Rx/Tx
[ 29.221123] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
--
Gruss Marcus
Mehr Informationen über die Mailingliste Eisfair