[Eisfair] [e1] Fehler nach update auf base v2.8.5 und eiskernel-smp v4.4.0

[W. Loefstedt]

Am 14.01.2020 um 19:27 schrieb Marcus Röckrath:

> In der /etc/mdadm.conf der initrd stehen nicht die UUIDs der mdX sondern die
> UUIDs der sdX, also der beteiligten RAID-Member-Partitionen.

eisfair # cat /etc/mdadm/mdadm.conf
#----------------------------------------------------------------------------
#  mdadm.conf file generated by mdadm version: 2.2.0
#
#  Do not edit this file, edit /etc/config.d/mdadm
#  Creation date: 2016-04-06 Time: 14:55:23
#----------------------------------------------------------------------------
DEVICE /dev/hdc[1-9]
ARRAY /dev/md1 level=raid1 devices=/dev/hdc1
DEVICE /dev/hda[1-9]
ARRAY /dev/md2 level=raid1 devices=/dev/hda2,/dev/hdc2
ARRAY /dev/md3 level=raid1 devices=/dev/hda3
PROGRAM /sbin/mdadm-event-handler.sh


Erstaunlicherweise steht START_MDADM='no' in der /etc/config.d/mdadm!


eisfair # cat /etc/config.d/mdadm
#------------------------------------------------------------------------------
# /etc/config.d/mdadm - configuration file for mdadm
#
# Creation   :  2011-10-02 hbfl
# Last Update:  2019-08-14 root
#
# Copyright (c) 2001-2019 the eisfair team, team(at)eisfair(dot)org
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#------------------------------------------------------------------------------

# mdadm-VERSION 2.8.3

#------------------------------------------------------------------------------
# Basic configuration
#------------------------------------------------------------------------------

START_MDADM='no'                  # Use yes or no

#------------------------------------------------------------------------------
# Global settings
#------------------------------------------------------------------------------

MDADM_DELAY='60'                  # Polling time, default = 60 sec
MDADM_MAIL='root at allerstrasse.de' # Use: mailaddress from admin
MDADM_SEND_MAIL_ON_START='no'     # Send email on start yes/no
MDADM_SEND_EVENT_TO_SYSLOG='no'   # Send event messages to syslog yes/no
MDADM_SEND_EVENT_MAIL='no'        # Send event messages as mail yes/no
MDADM_SEND_STATUS_MAIL=''         # Send status messages with cron

#------------------------------------------------------------------------------
# End
#------------------------------------------------------------------------------

Wieso läuft der Raid eigentlich?

Gruss, Wolfgang