[Eisfair] [E1] Nach Neuinstallation kein Kernel-Update von 3.16.74-eisfair-1-SMP auf 4.4.1 möglich

[Armin Weinmann]

Hallo NG,

ich habe gestern unter VMWare 6.7 einen E1 neu installiert vom
Installationsmedium eisfair-2.8.23-3.48.0-SMP-cd-image.iso.
Ich verwende den VMWare SCSI Controller, als Treiber habe ich vmw_pvscsi
ausgewählt. Die Kiste läuft soweit, aber ich kann den Kernel nicht updaten.

Beim Versuch den Kernel upzudaten erhalte ich folgende Meldungen:


Installation of: eiskernel-smp (4.4.1) ...
Saving your kernel configuration in /tmp/kernel-backup.tar:
  /boot
... SNIP (komplette Meldung am Ende des Beitrags) ...


Copying /boot/old-initrd.gz to /boot/initrd-3.16.74-SMP.gz ...
3.16.74-SMP backup is using 6134 of 64679 blocks in /boot.
max-partitions is not set, dont trying to convert disk to
/dev/disk/by-id/ ...

Cannot convert boot device /dev/sda to /dev/disk/by-id/!


Restoring your old kernel configuration ...
Added eis  *
Done.
Kernel update failed!
Installation canceled by /tmp/install.sh: eiskernel-smp (4.4.1)!
Failed to install: eiskernel-smp (4.4.1)!
error: installation aborted!
Press ENTER to continue

Was will mir diese Meldung sagen? Wo kann ich die 'max-partitions' setzen?

sxvssh # lsblkid
-bash: lsblkid: command not found
sxvssh # blkid
/dev/sda1: UUID="b52b15da-f823-4e22-b618-56e4e4fc44bd" TYPE="ext4"
PARTLABEL="boot" PARTUUID="8dcebcbc-1503-4e6d-81f0-e3dd1be00554"
/dev/sda2: UUID="ff87d157-afa5-4a82-9148-da298e41ae1b" TYPE="swap"
PARTLABEL="swap" PARTUUID="4a2455cd-d41c-47a2-b67b-3edd10c511d7"
/dev/sda3: UUID="495ec45b-6edc-4686-9527-44dc284fab60" TYPE="ext4"
PARTLABEL="root" PARTUUID="edfb1271-5641-4be0-a0ec-f496196213e2"

sxvssh # cat /etc/fstab
UUID=495ec45b-6edc-4686-9527-44dc284fab60 / ext4 
defaults,errors=remount-ro 0 1
UUID=b52b15da-f823-4e22-b618-56e4e4fc44bd /boot ext4 
defaults,errors=remount-ro 0 1
UUID=ff87d157-afa5-4a82-9148-da298e41ae1b none swap sw 0 0
proc        /proc          proc      defaults                 0 0
/dev/fd0    /media/floppy  auto      defaults,user,noauto     0 0
/dev/cdrom  /media/cdrom   iso9660   defaults,ro,user,noauto  0 0
devpts      /dev/pts       devpts    defaults,gid=5,mode=620  0 0
/sys        /sys           sysfs     defaults                 0 0
tmpfs       /dev/shm       tmpfs     rw,nosuid,nodev          0 0
tmpfs       /run           tmpfs     defaults                 0 0
devtmpfs    /dev           devtmpfs  mode=0755,nosuid         0 0

Das gleiche passiert auch beim Installieren des VIRT Kernels...

Was kann ich machen, welche Infos muss ich noch liefern?

Vielen Dank

Armin

====================================================================
Komplette Ausgabe des Update-Versuchs:

Installation of: eiskernel-smp (4.4.1) ...
Saving your kernel configuration in /tmp/kernel-backup.tar:
  /boot
  /etc/lilo.conf
  /lib/modules/3.16.74-eisfair-1-SMP
  /System.map-3.16.74-eisfair-1-SMP
  /usr/src/linux-3.16.74-eisfair-1/dot-config-smp
  /usr/src/linux-4.9.207-eisfair-1/dot-config-smp
  /usr/src/linux-4.9.207-eisfair-1/dot-config-virt
  /usr/src/linux-3.16.74-eisfair-1/Module.symvers-smp
  /usr/src/linux-4.9.207-eisfair-1/Module.symvers-smp
  /usr/src/linux-4.9.207-eisfair-1/Module.symvers-virt
  /var/install/packages/eiskernel
  /var/install/packages/eiskernel-smp
Done.
Compressing /tmp/kernel-backup.tar to /tmp/kernel-backup.tar.gz ...
Moving /boot/kernel to /boot/old-kernel ...
Moving /boot/initrd.gz to /boot/old-initrd.gz ...
Creating initramfs ...
Blacklisting usb-storage ...
Copying binfiles:
  Copying /bin/basename to /tmp/initrd_mount.HWVKA4i2m5/bin.
  Copying /bin/false to /tmp/initrd_mount.HWVKA4i2m5/bin.
  Copying /usr/bin/killall to /tmp/initrd_mount.HWVKA4i2m5/usr/bin.
  Copying /bin/kmod to /tmp/initrd_mount.HWVKA4i2m5/bin.
  Copying /bin/ln to /tmp/initrd_mount.HWVKA4i2m5/bin.
  Copying /bin/readlink to /tmp/initrd_mount.HWVKA4i2m5/bin.
  Copying /usr/bin/udevadm to /tmp/initrd_mount.HWVKA4i2m5/usr/bin.
  Copying /bin/uname to /tmp/initrd_mount.HWVKA4i2m5/bin.
Done.
Copying sbinfiles:
  Copying /sbin/blkid to /tmp/initrd_mount.HWVKA4i2m5/sbin.
  Copying /sbin/udevd to /tmp/initrd_mount.HWVKA4i2m5/sbin.
Done.
Copying libraries:
  Copying /lib/ld-linux.so.2 to /tmp/initrd_mount.HWVKA4i2m5/lib.
  Copying /lib/libc.so.6 to /tmp/initrd_mount.HWVKA4i2m5/lib.
  Copying /lib/libdl.so.2 to /tmp/initrd_mount.HWVKA4i2m5/lib.
  Copying /lib/libpthread.so.0 to /tmp/initrd_mount.HWVKA4i2m5/lib.
  Copying /lib/libz.so.1 to /tmp/initrd_mount.HWVKA4i2m5/lib.
  Copying /usr/lib/libblkid.so.1 to /tmp/initrd_mount.HWVKA4i2m5/usr/lib.
  Copying /usr/lib/libcrypto.so.1.1 to /tmp/initrd_mount.HWVKA4i2m5/usr/lib.
  Copying /usr/lib/libkmod.so.2 to /tmp/initrd_mount.HWVKA4i2m5/usr/lib.
  Copying /usr/lib/liblzma.so.5 to /tmp/initrd_mount.HWVKA4i2m5/usr/lib.
  Copying /usr/lib/libssl.so.1.1 to /tmp/initrd_mount.HWVKA4i2m5/usr/lib.
Done.
Running in virtual environment, don't trying to add microcode updates ...
Installing new initrd.gz to /boot/initrd.gz ...
Installing new kernel to /boot/kernel ...
Saving old /etc/lilo.conf to /etc/lilo.conf.OLD ...
Kernel 3.16.74-eisfair-1 from fallback list is running ...
No fallback for kernel 3.16.74-eisfair-1 exist, creating fallback ...
Copying /boot/old-kernel to /boot/kernel-3.16.74-SMP ...
Copying /boot/old-initrd.gz to /boot/initrd-3.16.74-SMP.gz ...
3.16.74-SMP backup is using 6134 of 64679 blocks in /boot.
max-partitions is not set, dont trying to convert disk to
/dev/disk/by-id/ ...

Cannot convert boot device /dev/sda to /dev/disk/by-id/!


Restoring your old kernel configuration ...
Added eis  *
Done.
Kernel update failed!
Installation canceled by /tmp/install.sh: eiskernel-smp (4.4.1)!
Failed to install: eiskernel-smp (4.4.1)!
error: installation aborted!
Press ENTER to continue