[Eisfair] [e64] nach update kommt eisfair nicht mehr hoch
Fabian Törner
fabian at toerners.eisfair.net
Mi Mär 15 13:08:40 CET 2023
Hallo zusammen,
Am 15.03.2023 um 12:45 schrieb Fabian Törner:
> Hallo zusammen,
>
> auf der neuen Kiste habe ich das Problem (egal ob mit efi s. anderen
> Eintrag weiter vorne, oder mit CMS) das der Rechner nach dem Update
> nicht mehr hoch kommt. Ich vermute es hat was mit udev zu tun.
> Auf dem System ist nur ein Festplatte gemounted, und während des Starts
> wird:
> [DEPEND] Dependency failed for /mnt.
> [DEPEND] Dependency for Local File Systems.
>
> angezeigt
> Dann kommen ein paar weitere Einträge mit [ OK ]
> [ OK ] Mounted /boot
> [ OK ] Reached target Sound Card.
> [ **** ] A start job is running for /dev/dis...a208-58a791ede211
>
> dann lande im ermergency mode:
>
> You are in ermergency mode. After logging in, type "journalctl -xb" to
> view system logs, "systemctl reboot" to reboot, "systemctl default" or
> "exit" to boot into default mode.
> Give root password for maintenance
>
> Root passwort wird nicht akzeptiert also kann ich nur CTRL-D drücken und
> es wird versucht das default target zu starten. Wo er dann aber hängen
> bleibt.
>
> Mhhh - komisch alles - was kann ich tun?
folgend habe ich jetzt noch mal (nach Neuinstallation auf dem
Testrechner) folgende Ausgangslage:
eis # eisman install mdadm
The following packages will be installed:
version status name source
---------------------------------------------------------------------
3.2.0 stable system-group-kvm https://www.pack-eis.de
3.2.0 stable system-group-hardware https://www.pack-eis.de
3.2.3 stable systemd-default-settings https://www.pack-eis.de
3.2.0 stable liblz4-1 https://www.pack-eis.de
3.2.0 stable libgpg-error0 https://www.pack-eis.de
3.2.1 stable libgcrypt20 https://www.pack-eis.de
3.2.3 stable libsystemd0 https://www.pack-eis.de
3.2.2 stable libexpat1 https://www.pack-eis.de
3.2.4 stable dbus-1-common https://www.pack-eis.de
3.2.4 stable libdbus-1-3 https://www.pack-eis.de
3.2.4 stable dbus-1-daemon https://www.pack-eis.de
3.2.4 stable dbus-1-tools https://www.pack-eis.de
3.2.6 stable dbus-1 https://www.pack-eis.de
3.2.0 stable libseccomp2 https://www.pack-eis.de
3.2.1 stable libffi8 https://www.pack-eis.de
3.2.0 stable libp11-kit0 https://www.pack-eis.de
3.2.0 stable libnss_usrfiles2 https://www.pack-eis.de
3.2.0 stable libip4tc2 https://www.pack-eis.de
3.2.8 stable eisfair-base https://www.pack-eis.de
3.2.3 stable systemd https://www.pack-eis.de
3.2.3 stable systemd-sysvcompat https://www.pack-eis.de
3.2.0 stable libjson-c5 https://www.pack-eis.de
3.2.0 stable libdevmapper1_03 https://www.pack-eis.de
3.2.0 stable libargon2-1 https://www.pack-eis.de
3.2.0 stable libcryptsetup12 https://www.pack-eis.de
3.2.3 stable udev https://www.pack-eis.de
3.2.0 stable eisfair-service https://www.pack-eis.de
3.2.2 stable environment https://www.pack-eis.de
3.2.0 stable locales https://www.pack-eis.de
3.2.3 stable sysvinit-tools https://www.pack-eis.de
3.2.3 stable mdadm https://www.pack-eis.de
31 package(s) using approx. 32 MB of disk space.
Continue (y/n) [yes]? y
Downloading required packages ...
=> [####################] system-group-kvm (3.2.0)...
[ OK ]
=> [####################] system-group-hardware (3.2.0)...
[ OK ]
=> [####################] systemd-default-settings (3.2.3)...
[ OK ]
=> [####################] liblz4-1 (3.2.0)...
[ OK ]
=> [####################] libgpg-error0 (3.2.0)...
[ OK ]
=> [####################] libgcrypt20 (3.2.1)...
[ OK ]
=> [####################] libsystemd0 (3.2.3)...
[ OK ]
=> [####################] libexpat1 (3.2.2)...
[ OK ]
=> [####################] dbus-1-common (3.2.4)...
[ OK ]
=> [####################] libdbus-1-3 (3.2.4)...
[ OK ]
=> [####################] dbus-1-daemon (3.2.4)...
[ OK ]
=> [####################] dbus-1-tools (3.2.4)...
[ OK ]
=> [####################] dbus-1 (3.2.6)...
[ OK ]
=> [####################] libseccomp2 (3.2.0)...
[ OK ]
=> [####################] libffi8 (3.2.1)...
[ OK ]
=> [####################] libp11-kit0 (3.2.0)...
[ OK ]
=> [####################] libnss_usrfiles2 (3.2.0)...
[ OK ]
=> [####################] libip4tc2 (3.2.0)...
[ OK ]
=> [####################] eisfair-base (3.2.8)...
[ OK ]
=> [####################] systemd (3.2.3)...
[ OK ]
=> [####################] systemd-sysvcompat (3.2.3)...
[ OK ]
=> [####################] libjson-c5 (3.2.0)...
[ OK ]
=> [####################] libdevmapper1_03 (3.2.0)...
[ OK ]
=> [####################] libargon2-1 (3.2.0)...
[ OK ]
=> [####################] libcryptsetup12 (3.2.0)...
[ OK ]
=> [####################] udev (3.2.3)...
[ OK ]
=> [####################] eisfair-service (3.2.0)...
[ OK ]
=> [####################] environment (3.2.2)...
[ OK ]
=> [####################] locales (3.2.0)...
[ OK ]
=> [####################] sysvinit-tools (3.2.3)...
[ OK ]
=> [####################] mdadm (3.2.3)...
[ OK ]
Done!
Installation of: system-group-kvm (3.2.0) ...
Successfully installed: system-group-kvm (3.2.0)!
Installation of: system-group-hardware (3.2.0) ...
Successfully installed: system-group-hardware (3.2.0)!
Installation of: systemd-default-settings (3.2.3) ...
Successfully installed: systemd-default-settings (3.2.3)!
Installation of: liblz4-1 (3.2.0) ...
Successfully installed: liblz4-1 (3.2.0)!
Installation of: libgpg-error0 (3.2.0) ...
Successfully installed: libgpg-error0 (3.2.0)!
Installation of: libgcrypt20 (3.2.1) ...
Successfully installed: libgcrypt20 (3.2.1)!
Installation of: libsystemd0 (3.2.3) ...
Successfully installed: libsystemd0 (3.2.3)!
Installation of: libexpat1 (3.2.2) ...
Successfully installed: libexpat1 (3.2.2)!
Installation of: dbus-1-common (3.2.4) ...
Successfully installed: dbus-1-common (3.2.4)!
Installation of: libdbus-1-3 (3.2.4) ...
Successfully installed: libdbus-1-3 (3.2.4)!
Installation of: dbus-1-daemon (3.2.4) ...
Successfully installed: dbus-1-daemon (3.2.4)!
Installation of: dbus-1-tools (3.2.4) ...
Successfully installed: dbus-1-tools (3.2.4)!
Installation of: dbus-1 (3.2.6) ...
* Starting the D-Bus Messagebus Daemon...
[ OK ]
Successfully installed: dbus-1 (3.2.6)!
Installation of: libseccomp2 (3.2.0) ...
Successfully installed: libseccomp2 (3.2.0)!
Installation of: libffi8 (3.2.1) ...
Successfully installed: libffi8 (3.2.1)!
Installation of: libp11-kit0 (3.2.0) ...
Successfully installed: libp11-kit0 (3.2.0)!
Installation of: libnss_usrfiles2 (3.2.0) ...
Successfully installed: libnss_usrfiles2 (3.2.0)!
Installation of: libip4tc2 (3.2.0) ...
Successfully installed: libip4tc2 (3.2.0)!
Installation of: eisfair-base (3.2.8) ...
Control system services
usage:
service [OPTIONS] COMMAND PACKAGE [PACKAGE]*
options:
--msg=<msg> message to be displayed
--help show this help screen
possible values for COMMAND:
is-service check whether a package name denotes a service
is-enabled check whether a service is enabled
enable enable a service for autostart
disable disable a service for autostart
start manually start a service
stop manually stop a service
restart manually stop and restart a service
try-restart restart service only if it is already running
status show status of a service
reload reload configuration files
Control system services
usage:
service [OPTIONS] COMMAND PACKAGE [PACKAGE]*
options:
--msg=<msg> message to be displayed
--help show this help screen
possible values for COMMAND:
is-service check whether a package name denotes a service
is-enabled check whether a service is enabled
enable enable a service for autostart
disable disable a service for autostart
start manually start a service
stop manually stop a service
restart manually stop and restart a service
try-restart restart service only if it is already running
status show status of a service
reload reload configuration files
Control system services
usage:
service [OPTIONS] COMMAND PACKAGE [PACKAGE]*
options:
--msg=<msg> message to be displayed
--help show this help screen
possible values for COMMAND:
is-service check whether a package name denotes a service
is-enabled check whether a service is enabled
enable enable a service for autostart
disable disable a service for autostart
start manually start a service
stop manually stop a service
restart manually stop and restart a service
try-restart restart service only if it is already running
status show status of a service
reload reload configuration files
Control system services
usage:
service [OPTIONS] COMMAND PACKAGE [PACKAGE]*
options:
--msg=<msg> message to be displayed
--help show this help screen
possible values for COMMAND:
is-service check whether a package name denotes a service
is-enabled check whether a service is enabled
enable enable a service for autostart
disable disable a service for autostart
start manually start a service
stop manually stop a service
restart manually stop and restart a service
try-restart restart service only if it is already running
status show status of a service
reload reload configuration files
* Setting up resolv.conf ...
[ OK ]
Successfully installed: eisfair-base (3.2.8)!
Installation of: systemd (3.2.3) ...
Creating group 'systemd-journal' with GID 491.
Creating group 'systemd-timesync' with GID 490.
Creating user 'systemd-timesync' (systemd Time Synchronization) with UID
490 and GID 490.
Initializing machine ID from D-Bus machine ID.
Created symlink /etc/systemd/system/default.target →
/usr/lib/systemd/system/multi-user.target.
Created symlink /etc/systemd/system/tmp.mount → /dev/null.
Created symlink
/etc/systemd/system/getty.target.wants/getty at tty1.service →
/usr/lib/systemd/system/getty at .service.
Created symlink
/etc/systemd/system/dbus-org.freedesktop.timesync1.service →
/usr/lib/systemd/system/systemd-timesyncd.service.
Created symlink
/etc/systemd/system/sysinit.target.wants/systemd-timesyncd.service →
/usr/lib/systemd/system/systemd-timesyncd.service.
Successfully installed: systemd (3.2.3)!
Installation of: systemd-sysvcompat (3.2.3) ...
Successfully installed: systemd-sysvcompat (3.2.3)!
Installation of: libjson-c5 (3.2.0) ...
Successfully installed: libjson-c5 (3.2.0)!
Installation of: libdevmapper1_03 (3.2.0) ...
Successfully installed: libdevmapper1_03 (3.2.0)!
Installation of: libargon2-1 (3.2.0) ...
Successfully installed: libargon2-1 (3.2.0)!
Installation of: libcryptsetup12 (3.2.0) ...
Successfully installed: libcryptsetup12 (3.2.0)!
Installation of: udev (3.2.3) ...
Info:
Core libraries or services have been updated.
Reboot is required to ensure that your system benefits from these
updates.
Successfully installed: udev (3.2.3)!
Installation of: eisfair-service (3.2.0) ...
Info:
This package requires a running systemd process.
Please reboot the system and restart the installation.
error: installation of "eisfair-service" aborted by /tmp/preinstall.sh!
Failed to install: eisfair-service (3.2.0)!
error: installation aborted!
eis #
Wenn ich nun neustarte kommt die Kiste wieder nicht hoch - daher lass
ich es lieber um evtl. bei der Fehlersuche zu helfen :)
Viele Grüße
Fabian
--
Diese E-Mail wurde von AVG-Antivirussoftware auf Viren geprüft.
www.avg.com
Mehr Informationen über die Mailingliste Eisfair