[Eisfair_dev] fbrcapi für eisfair [1]
Stephan Sanders
Stephan at genlog.de
Do Dez 29 17:49:12 CET 2011
Hallo Fabian, Hallo Rolf,
Am 29.12.2011 17:14, schrieb Fabian Törner:
>>
>> Auf der Konsole: capiinfo
>
> eis # capiinfo
> Number of Controllers : 1
> Controller 1:
> Manufacturer: AVM Berlin
> CAPI Version: 2.0
> Manufacturer Version: 0.0-03 (0.3)
> Serial Number: 0004711
> BChannels: 2
> Global Options: 0x00000039
> internal controller supported
> DTMF supported
> Supplementary Services supported
> channel allocation supported (leased lines)
> B1 protocols support: 0x80003c0b
> 64 kbit/s with HDLC framing
> 64 kbit/s bit-transparent operation
> V.110 synconous operation with HDLC framing
> B2 protocols support: 0x00000003
> ISO 7776 (X.75 SLP)
> Transparent
> B3 protocols support: 0x00000081
> Transparent
> Modem
>
> 0001
> 0200
> 39000000
> 0b3c0080
> 03000000
> 81000000
> 00000000 00000000 00000000 00000000 00000000 00000000
> 01000001 00020000 00000000 00000000 00000000
>
> Supplementary services support: 0x000003ff
> Hold / Retrieve
> Terminal Portability
> ECT
> 3PTY
> Call Forwarding
> Call Deflection
> MCID
> CCBS
>
Das war schon genau das, was ich haben wollte. Ich habe nur im Vergleich
noch selbst dazugeschrieben, wie es mit einer eingebauten AVM Karte
ausschaut. Dort sind bei den B1-B3 Protokollen einige mehr:
B1 protocols support: 0x4000011f
64 kbit/s with HDLC framing
64 kbit/s bit-transparent operation
V.110 asynconous operation with start/stop byte framing
V.110 synconous operation with HDLC framing
T.30 modem for fax group 3
Modem asyncronous operation with start/stop byte framing
B2 protocols support: 0x00000b1b
ISO 7776 (X.75 SLP)
Transparent
LAPD with Q.921 for D channel X.25 (SAPI 16)
T.30 for fax group 3
ISO 7776 (X.75 SLP) with V.42bis compression
V.120 asyncronous mode
V.120 bit-transparent mode
B3 protocols support: 0x800000bf
Transparent
T.90NL, T.70NL, T.90
ISO 8208 (X.25 DTE-DTE)
X.25 DCE
T.30 for fax group 3
T.30 for fax group 3 with extensions
Modem
Durch die Abfrage hier will ich mal ein wenig Untersuchen, was für
Unterschiede die Fritzboxen so haben. Habe heute auch in meinem W900 das
DECT Teil abgeschossen. Meine Frau meldete sich mit: "Warum kann ich
nicht mehr telefonieren". In der Fritzbox sind ja mehrere virtuelle
Controller ansprechbar. Bei euch wird im Moment nur einer angezeigt.
Wenn man den Wert erhöht, seht ihr mehrere. Das geht mit [1].
Wenn man dann mehrere Controller via capiinfo sieht, kann man fbrcapi
sagen, welcher Controller verwendet werden soll. Und je nach dem welche
Aufgabe der Controller in der Fritzbox hat. So habe ich wohl den DECT
Controller erwischt :-/.
Vielen dank erstmal und viele Grüße
Stephan
[1] http://wehavemorefun.de/fritzbox/index.php/CAPI-over-TCP
Mehr Informationen über die Mailingliste Eisfair_dev