[Eisfair_dev] [e1,e2] LPRng 1.17.2 (Status 'testing') verfügbar

Thomas Bork tom at eisfair.org
So Aug 19 02:18:34 CEST 2012


Am 19.08.2012 01:08, schrieb ich:

> Testkernel liegt bei den testteam-tarballs.

Noch mal abgeändert.

Beim Update von Kernel 2.4 mit mptbase:

[...]
Select (1-1, ENTER=Return, 0=Exit)? 1
Package: eisfair Kernel (Linux 2.6.32-eisfair-1 Non-SMP)

   URL:       file:///public/eiskernel.tar.gz

   Name:      eiskernel
   Package:   eisfair Kernel (Linux 2.6.32-eisfair-1 Non-SMP)
   Version:   2.0.25
   Date:      2012-08-18
   Author:    the eisfair team, team(at)eisfair(dot)org
   Status:    testing
   Section:   base

   eisfair Kernel (Linux 2.6.32-eisfair-1 Non-SMP)
   Based on 2.6.32.59.


Install (y=yes, n=no)? y
Please wait ...
Saving your kernel configuration in /tmp/kernel-backup.tar.gz ...
    /boot
    /etc/lilo.conf
    /System.map-2.4.35-wt1
    /var/install/packages/eiskernel
Done.

Before you install a new kernel, you should make a backup
of your current kernel on diskette.

If you want to backup your kernel now, please insert
a formatted diskette, then answer with 'yes'.

Backup your old kernel now (y/n)? n
Found loaded SCSI/SATA module(s):
   mptbase
Mapping mptbase from kernel 2.4 to mptspi, mptfc and mptsas from kernel 2.6!
Moving /boot/kernel /boot/old-kernel ...
Moving /boot/initrd.gz /boot/old-initrd.gz ...
New complete SCSI/SATA and dependend module(s) for initrd:
   scsi_mod
   sd_mod
   scsi_transport_spi
   scsi_transport_fc
   scsi_transport_sas
   mptbase
   mptscsih
   mptspi
   mptfc
   mptsas
Installing new initrd.gz to /boot/initrd.gz ...
Installing new kernel to /boot/kernel ...
Saving old /etc/lilo.conf to /etc/lilo.conf.OLD ...
Creating devices and checking permissions, please wait:
...
Added eis  *
Added oldeis
Added 2.4.35-wt1


Kernel update succeeded.
If you are unsure or have seen some errors,
please answer the following question with 'no'.

Activate new kernel installation now (y/n)? y

New kernel 2.6.32-eisfair-1 installed.
Please log off and reboot the system now.
[...]




Macht man dann vom Kernel 2.6 ein Update, sieht das so aus:

[...]
Select (1-1, ENTER=Return, 0=Exit)? 1
Package: eisfair Kernel (Linux 2.6.32-eisfair-1 Non-SMP)

   URL:       file:///public/eiskernel.tar.gz

   Name:      eiskernel
   Package:   eisfair Kernel (Linux 2.6.32-eisfair-1 Non-SMP)
   Version:   2.0.25
   Date:      2012-08-18
   Author:    the eisfair team, team(at)eisfair(dot)org
   Status:    testing
   Section:   base

   eisfair Kernel (Linux 2.6.32-eisfair-1 Non-SMP)
   Based on 2.6.32.59.


Install (y=yes, n=no)? y
Please wait ...
Saving your kernel configuration in /tmp/kernel-backup.tar.gz ...
    /boot
    /etc/lilo.conf
    /System.map-2.4.35-wt1
    /System.map-2.6.32-eisfair-1
    /var/install/packages/eiskernel
    /lib/modules/2.6.32-eisfair-1
Done.

Before you install a new kernel, you should make a backup
of your current kernel on diskette.

If you want to backup your kernel now, please insert
a formatted diskette, then answer with 'yes'.

Backup your old kernel now (y/n)? n
Found loaded SCSI/SATA module(s):
   mptspi
   mptfc
   mptsas
Seems the module mptfc is not needed ...
Seems the module mptsas is not needed ...
Moving /boot/kernel /boot/old-kernel ...
Moving /boot/initrd.gz /boot/old-initrd.gz ...
New complete SCSI/SATA and dependend module(s) for initrd:
   scsi_mod
   sd_mod
   scsi_transport_spi
   mptbase
   mptscsih
   mptspi
   scsi_transport_fc
   mptfc
   scsi_transport_sas
   mptsas
Installing new initrd.gz to /boot/initrd.gz ...
Installing new kernel to /boot/kernel ...
Saving old /etc/lilo.conf to /etc/lilo.conf.OLD ...
Creating devices and checking permissions, please wait:
...
Added eis  *
Added oldeis
Added 2.4.35-wt1


Kernel update succeeded.
If you are unsure or have seen some errors,
please answer the following question with 'no'.

Activate new kernel installation now (y/n)? y

New kernel 2.6.32-eisfair-1 installed.
Please log off and reboot the system now.
[...]



Wie man an den Warnungen sieht, war eigentlich nur mptspi nötig, das ist 
bei anderer Hardware aber eben wieder anders...

-- 
der tom
[eisfair-team]


Mehr Informationen über die Mailingliste Eisfair_dev