[Eisfair_dev] SANE mit hpaio
Stephan Manske
usenet-reply at stephan.manske-net.de
Di Okt 30 15:13:43 CET 2012
holgerbruenjes at gmx.net (Holger Bruenjes) schrieb:
> Am 2012-10-30 01:05, schrieb Stephan Manske:
> > Ein hpaio.conf gibt es in diesem Verzeichnis nicht.
>
> dann leg mal eins an ;-)
ja, und mit welchem Inhalt?
ich habe jetzt mal aus hp.conf übernommen und meinen Officet
eingetragen:
scsi HP
# Uncomment the following if you have "Error during device I/O" on SCSI
# option dumb-read
#
# The usual place for a SCSI-scanner on Linux
/dev/scanner
#
# USB-scanners supported by the hp-backend
# HP OfficeJet
usb 0x03f0 0x2d11
#
# Uncomment the following if your scanner is connected by USB,
# but you are not using libusb
# /dev/usb/scanner0
# option connect-device
#/dev/usbscanner0
# option connect-device
> was sagt lsusb dazu?
| Bus 001 Device 001: ID 0000:0000
| Bus 001 Device 003: ID 03f0:2d11 Hewlett-Packard OfficeJet 6110
Ciao, Stephan
--
E-Mail: stephan at manske-net.de - WWW: http://stephan.manske-net.de/ //
PGP 2.6.3i \X/
Du bist schlank wie ein Reh - oder wie heisst das graue Tier mit Ruessel?
Mehr Informationen über die Mailingliste Eisfair_dev