[Eisfair_dev] hpaio scannen ja, aber Drucken NEIN!? (was: SANE mit hpaio)
Stephan Manske
usenet-reply at stephan.manske-net.de
Di Okt 30 21:48:29 CET 2012
/me schrieb:
> holgerbruenjes at gmx.net (Holger Bruenjes) schrieb:
bei dem leeren ...
> | root at eis (/root)# sane-find-scanner
> hm, nix da?
bleibt es zwar, aber scannen kann ich jetzt! (und zwar mit wirklich
guter Qualität)
> | scanimage: open of device hpaio:/usb/OfficeJet_6100_Series?serial=MYxxx failed: Invalid argument
Das scheint nämlich irgendwas mit dem Scanner selber zu tun gehabt zu
haben. Vielleicht mochte er es nicht, wenn ich ihn im laufenden
Betrieb vom PC an den Server umgestöpselt habe.
Jedenfalls, nachdem ich ihn nochmal stromlos gemacht hatte, geht
scannen jetzt wunderbar!
root at eis (/root)# scanimage -T
scanimage: scanning image of size 638x1125 pixels at 24 bits/pixel
scanimage: acquiring RGB frame, 8 bits/sample
scanimage: reading one scanline, 1914 bytes... PASS
scanimage: reading one byte... PASS
scanimage: stepped read, 2 bytes... PASS
scanimage: stepped read, 4 bytes... PASS
scanimage: stepped read, 8 bytes... PASS
scanimage: stepped read, 16 bytes... PASS
scanimage: stepped read, 32 bytes... PASS
scanimage: stepped read, 64 bytes... PASS
scanimage: stepped read, 128 bytes... PASS
scanimage: stepped read, 256 bytes... PASS
scanimage: stepped read, 512 bytes... PASS
scanimage: stepped read, 1024 bytes... PASS
scanimage: stepped read, 2048 bytes... PASS
scanimage: stepped read, 2047 bytes... PASS
scanimage: stepped read, 1023 bytes... PASS
scanimage: stepped read, 511 bytes... PASS
scanimage: stepped read, 255 bytes... PASS
scanimage: stepped read, 127 bytes... PASS
scanimage: stepped read, 63 bytes... PASS
scanimage: stepped read, 31 bytes... PASS
scanimage: stepped read, 15 bytes... PASS
scanimage: stepped read, 7 bytes... PASS
scanimage: stepped read, 3 bytes... PASS
Dafür kann ich über den HP nicht mehr drucken. :-((
mein parport-Laser-Drucker läuft einwandfrei, der HP geht nicht mehr:
Starting LPRng ...
parport loaded
parport_pc loaded on io 0x378 irq none
lp loaded on parport 0
Warning - usbpr1: cannot open lp device '/dev/usb/lp0' - No such device
LPRng is now running
#------------------------------------------------------------------------------
# /etc/config.d/usb - configuration file for usb
#------------------------------------------------------------------------------
# Basic configuration
#------------------------------------------------------------------------------
START_USB='yes' # USE yes or no
USB_LOWLEVEL='uhci' # driver for USB-Chipset
USB_2='yes' # start USB2 support
USB_PRINTER='yes' # driver for usb-printer
USB_STORAGE='yes' # driver for usb-storage
#------------------------------------------------------------------------------
# USB serial options
#------------------------------------------------------------------------------
USB_SERIAL='no' # Use yes or no, for driver USB to RS232
# adaptors
USB_SERIAL_DRIVER='' # low level driver for USB serial
USB_SERIAL_OPTIONS='' # options USB serial driver
#------------------------------------------------------------------------------
# USB dependent services
#------------------------------------------------------------------------------
USB_DEP_SERVICE_N='1' # how many dependent services
USB_DEP_SERVICE_1_NAME='HP Drucker' # Use a name what ever you want, it's
# only for you
USB_DEP_SERVICE_1_ACTIVE='yes' # Use yes or no
USB_DEP_SERVICE_1_DEVICE='lprng' # Use the device name, like lprng or
# usbcam
USB_DEP_SERVICE_2_NAME='HP Scanner' # Use a name what ever you want, it's
# only for you
USB_DEP_SERVICE_2_ACTIVE='yes' # Use yes or no
USB_DEP_SERVICE_2_DEVICE='sane' # Use the device name, like lprng or
# usbcam
#------------------------------------------------------------------------------
# End
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# /etc/config.d/lprng - configuration for LPRng on eisfair
#------------------------------------------------------------------------------
# General Settings
#
#------------------------------------------------------------------------------
START_LPRNG='yes' # Start on boot: yes or no
#------------------------------------------------------------------------------
# Local parallel Printer Configuration
#
# Set the number of parallel printer to use in LPRNG_LOCAL_PARPORT_PRINTER_N.
#
# Values below are only an example and are not used if
# LPRNG_LOCAL_PARPORT_PRINTER_N is '0'
#------------------------------------------------------------------------------
LPRNG_LOCAL_PARPORT_PRINTER_N='1' # How many local parallel printers
# do you want to use
LPRNG_LOCAL_PARPORT_PRINTER_1_ACTIVE='yes'
# Is this printer active: yes or no
LPRNG_LOCAL_PARPORT_PRINTER_1_IO='0x378'
# This is the io-adress of the
# 1. parallel printer port
LPRNG_LOCAL_PARPORT_PRINTER_1_IRQ='no' # Use interrupt: yes or no
LPRNG_LOCAL_PARPORT_PRINTER_1_COMMENT='Laserdrucker'
# Comment, Location for NOTIFY
LPRNG_LOCAL_PARPORT_PRINTER_1_NOTIFY='yes'
# Send printer messages: yes or no
#------------------------------------------------------------------------------
# Local USB Printer Configuration
#
# Set the number of USB printer to use in LPRNG_LOCAL_USBPORT_PRINTER_N.
#
# Values below are only an example and are not used if
# LPRNG_LOCAL_USBPORT_PRINTER_N is '0'
#------------------------------------------------------------------------------
LPRNG_LOCAL_USBPORT_PRINTER_N='1' # How many local USB printers
# do you want to use
LPRNG_LOCAL_USBPORT_PRINTER_1_ACTIVE='yes'
# Is this printer active: yes or no
LPRNG_LOCAL_USBPORT_PRINTER_1_COMMENT='HP Farbdrucker'
# Comment, Location for NOTIFY
LPRNG_LOCAL_USBPORT_PRINTER_1_NOTIFY='yes'
# Send printer messages: yes or no
*grmpf*
Ciao, Stephan
--
E-Mail: stephan at manske-net.de - WWW: http://stephan.manske-net.de/ //
PGP 2.6.3i \X/
POST = Personal Ohne Sinnvolle Taetigkeit
Mehr Informationen über die Mailingliste Eisfair_dev