[Eisfair_dev] Samba 4.1.0 unstable

[Fabian Törner]

Hallo tom,

Am 28.10.2013 21:26, schrieb Fabian Törner:

> Ein Laser Drucker - Test steht aus.

mhh hat nicht geklappt :(
Wollte heute was drucken - funktionierte aber nicht.
Keine Daten empfangen hier Auszug aus dmesg:

usb 8-3: new full speed USB device using xhci_hcd and address 0
usb 8-3: Device not responding to set address.
usb 8-3: Device not responding to set address.
usb 8-3: device not accepting address 0, error -71
hub 8-0:1.0: cannot disable port 3 (err = -32)
usb 8-3: new full speed USB device using xhci_hcd and address 0
xhci_hcd 0000:07:00.0: WARN: short transfer on control ep
xhci_hcd 0000:07:00.0: WARN: short transfer on control ep
xhci_hcd 0000:07:00.0: WARN: short transfer on control ep
usb 8-3: New USB device found, idVendor=04e8, idProduct=300c
usb 8-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-3: Product: Samsung Laser Printer ML-1200 Series
usb 8-3: Manufacturer: Samsung Electronics Co., Ltd.
usb 8-3: configuration #1 chosen from 1 choice
xhci_hcd 0000:07:00.0: WARN: short transfer on control ep
usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 
pid 0x300C
usb 8-3: USB disconnect, address 2
usblp0: removed
usb 8-3: new full speed USB device using xhci_hcd and address 0
usb 8-3: Device not responding to set address.
usb 8-3: Device not responding to set address.
usb 8-3: device not accepting address 0, error -71
hub 8-0:1.0: cannot disable port 3 (err = -32)
usb 8-3: new full speed USB device using xhci_hcd and address 0
xhci_hcd 0000:07:00.0: WARN: short transfer on control ep
xhci_hcd 0000:07:00.0: WARN: short transfer on control ep
xhci_hcd 0000:07:00.0: WARN: short transfer on control ep
usb 8-3: New USB device found, idVendor=04e8, idProduct=300c
usb 8-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-3: Product: Samsung Laser Printer ML-1200 Series
usb 8-3: Manufacturer: Samsung Electronics Co., Ltd.
usb 8-3: configuration #1 chosen from 1 choice
xhci_hcd 0000:07:00.0: WARN: short transfer on control ep
usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 
pid 0x300C
usb 8-3: USB disconnect, address 2
usblp0: removed
usb 8-3: new full speed USB device using xhci_hcd and address 0
usb 8-3: Device not responding to set address.
usb 8-3: Device not responding to set address.
usb 8-3: device not accepting address 0, error -71
hub 8-0:1.0: cannot disable port 3 (err = -32)
usb 8-3: new full speed USB device using xhci_hcd and address 0
xhci_hcd 0000:07:00.0: WARN: short transfer on control ep
xhci_hcd 0000:07:00.0: WARN: short transfer on control ep
xhci_hcd 0000:07:00.0: WARN: short transfer on control ep
usb 8-3: New USB device found, idVendor=04e8, idProduct=300c
usb 8-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-3: Product: Samsung Laser Printer ML-1200 Series
usb 8-3: Manufacturer: Samsung Electronics Co., Ltd.
usb 8-3: configuration #1 chosen from 1 choice
xhci_hcd 0000:07:00.0: WARN: short transfer on control ep
usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 
pid 0x300C
usb 8-3: USB disconnect, address 2
usblp0: removed

Vielen Dank & viele Grüße
Fabian