[Eisfair_dev] [e1] eiskernel 2.5.0 (Status 'unstable') verfügbar - 3.2er Kernel für eisfair-1
Fabian Törner
toerner at gmx.net
Mo Mär 3 18:41:55 CET 2014
Hallo nochmal,
Am 03.03.2014 18:27, schrieb Fabian Törner:
> habe eine einfache txt Datei drucken wollen - geht nicht vom Laptop aus.
> Keine Fehlermeldung nichts. Ein paar Minuten später machte der Drucker
> dann Anstalten drucken zu wollen hat er dann aber nicht. Hier ein paar
> Sachen aus den logs:
und noch was eben mir die Queues angeschaut:
Show Jobs in all Queues
Printer: usbpr1 at eis
Queue: no printable jobs in queue
Status: job 'root at eis+583' removed at 17:32:11.222
Press ENTER to continue
der Job wurde anscheinend - warum auch immer - removed um 17:32 ?!
mhhh...
Enable Printing and Spooling for all Queues
Printer: usbpr1 at eis
usbpr1 at eis.intern: enabled and started
Press ENTER to continue
Checking status of LPRng ...
LPRng is running.
usbcore is loaded.
uhci_hcd is loaded.
ohci_hcd is loaded.
ehci_hcd is loaded.
usblp is loaded.
Press ENTER to continue
Beim Abspeichern der Konfig kommt:
Checking configuration file ...
Configuration file was saved as lprng.2014-03-03-18-33-50 in /etc/backup.d.
Backup directory contained 11 files for package lprng (1 removed).
Activate Lprng configuration now (y/n) [y]? y
* Stopping LPRng ...
[ OK ]
Removing /var/spool/lpd ...
Configuration file was saved as printcap.sic in /etc.
No parport printers active.
No remote printers active.
* Starting LPRng ...
Warning - changing ownership '//var/spool/lpd' to 7/7
Warning - changing ownership '//var/spool/lpd' to 7/7
Warning - changing ownership '//var/spool/lpd/usbpr1' to 7/7
Warning - changing ownership '//var/spool/lpd/usbpr1' to 7/7
- Starting lpd ...
[ OK ]
If your configuration changed and you want to print over Samba,
you have to create a new Samba Configuration now.
Press ENTER to continue
Habe dann wegen dem Hinweis "create a new Samba Configuration" die Samba
Konfiguration noch mal geöffnet und gespeichert.
Danach habe ich vom Hauptrechner eine txt gedruckt:
2014-03-03-18:36:40 usbpr1 user1 at eis.intern 85 KByte
/var/spool/lprng/log.lprng (END)
wurde sofort abgeliefert und der Drucker sprang an und druckte.
Danach bin ich rüber zum lappi und Gleiches versucht:
2014-03-03-18:37:47 usbpr1 root at eis.intern 64 KByte
klappte nicht ?!
Hier steht auch schon wieder root obwohl genau wie der Hauptrechner über
user1 an samba angemeldet sind.
Kann es sein, dass nicht beide Rechner über den gleichen usernamen
angemeldet sein dürfen fürs Drucken?
Viele Grüße
Fabian
Mehr Informationen über die Mailingliste Eisfair_dev