[Eisfair_dev] E-1: wieder mal 'swapper/0 not tainted' -> Framebuffer?

Kay Martinen kay at martinen.de
Fr Okt 2 21:01:20 CEST 2015


Hallo.

Wieder mal (E-1 neu inst. auf gleicher HW) habe ich diese Fehlermeldung.
Kann das mit dem umschalten auf Framebuffer zu tun haben? Drin steckt
eine ATI Rage AGP-Karte, nur weil sie dann keinen PCI-Slot belegt.

> Console: switching to colour frame buffer device 80x30
> irq 9: nobody cared (try booting with the "irqpoll" option)
> Pid: 1, comm: swapper/0 Not tainted 3.2.67-eisfair-1-SMP #1
> Call Trace:
>  [<c1055ada>] __report_bad_irq+0x14/0x9e
>  [<c1055e42>] note_interrupt+0x160/0x1de
>  [<c1007908>] ? native_io_delay+0x14/0x28
>  [<c10546b2>] handle_irq_event_percpu+0xe9/0xfc
>  [<c10546e9>] handle_irq_event+0x24/0x3b
>  [<c1056470>] ? handle_level_irq+0x87/0x87
>  [<c10564d7>] handle_fasteoi_irq+0x67/0x8f
>  <IRQ>  [<c100371f>] ? do_IRQ+0x35/0x8e
>  [<c12fa0e9>] ? common_interrupt+0x29/0x30
>  [<c1007908>] ? native_io_delay+0x14/0x28
>  [<c11c821b>] ? vga16fb_imageblit+0x5e6/0x677
>  [<c11bcc6c>] ? fb_show_logo+0x568/0x665
>  [<c11c7857>] ? vga16fb_setcolreg+0x60/0xfc
>  [<c11c368e>] ? fbcon_switch+0x41d/0x498
>  [<c11c5c21>] ? bit_cursor+0x3e3/0x403
>  [<c12030a4>] ? redraw_screen+0xe7/0x1ac
>  [<c1203b48>] ? do_bind_con_driver+0x241/0x2b0
>  [<c1203b62>] ? do_bind_con_driver+0x25b/0x2b0
>  [<c1203c1c>] ? do_take_over_console+0x28/0x33
>  [<c11c186b>] ? do_fbcon_takeover+0x4c/0x8e
>  [<c11c50ec>] ? fbcon_event_notify+0x2ae/0x585
>  [<c10c69d9>] ? sysfs_add_one+0x10/0x92
>  [<c103f338>] ? notifier_call_chain+0x25/0x46
>  [<c103f432>] ? __blocking_notifier_call_chain+0x32/0x4a
>  [<c103f456>] ? blocking_notifier_call_chain+0xc/0xe
>  [<c11bb0e1>] ? fb_notifier_call_chain+0x11/0x13
>  [<c11bc643>] ? register_framebuffer+0x1cf/0x22e
>  [<c12e7483>] ? vga16fb_probe+0x168/0x1cb
>  [<c1212802>] ? platform_drv_probe+0xc/0xe
>  [<c1211a77>] ? driver_probe_device+0x75/0xfd
>  [<c1211b7e>] ? __device_attach+0x1c/0x2c
>  [<c1210d5b>] ? bus_for_each_drv+0x38/0x69
>  [<c12119d6>] ? device_attach+0x54/0x67
>  [<c1211b62>] ? __driver_attach+0x63/0x63
>  [<c1211435>] ? bus_probe_device+0x18/0x2d
>  [<c121007d>] ? device_add+0x33d/0x4b6
> [<c119ad97>] ? kobject_set_name_vargs+0x3d/0x4a
>  [<c1446a9f>] ? efifb_init+0x1b3/0x1b3
>  [<c120f184>] ? dev_set_name+0x14/0x16
>  [<c1212c01>] ? platform_device_add+0xd5/0x11b
>  [<c1446a9f>] ? efifb_init+0x1b3/0x1b3
>  [<c1446b11>] ? vga16fb_init+0x72/0x9a
>  [<c1001153>] ? do_one_initcall+0x6b/0x108
>  [<c14296b1>] ? start_kernel+0x2a7/0x2a7
>  [<c142973f>] ? kernel_init+0x8e/0x105
>  [<c12fa0f6>] ? kernel_thread_helper+0x6/0xd
> handlers:
> [<c11c970a>] acpi_irq
> Disabling IRQ #9
> fb0: VGA16 VGA frame buffer device

Ich dachte ein 'nofb' in der append-zeile von lilo.conf müsste den
Framebuffer abschalten. Klappt aber nicht. Mache ich was falsch?

'irqpoll' wie oben genannt kommt doch auch in die append-zeile oder?

Oder woran könnte es noch liegen? Soweit ich sehe wird die
swap-partition (mount) eingebunden, aber nicht genutzt weil nix zu
swappen ist. Momentan.



Kay
-- 
https://www.linuxcounter.net/cert/224140.png


Mehr Informationen über die Mailingliste Eisfair_dev