[Eisfair_dev] Allgemeine Frage zu E1 NUT

[Andreas Lehmler]

Abend Jürgen

> lsusb

eis1-imkebu # lsusb
Protocol spec without prior Class and Subclass spec at line 17403
Bus 002 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial
Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub
Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

> nut-scanner -U

eis1-imkebu # nut-scanner -U
Scanning USB bus.
[nutdev1]
         driver = "nutdrv_qx"
         port = "auto"
         vendorid = "0665"
         productid = "5161"
         product = "USB to Serial"
         vendor = "INNO TECH"
         bus = "002"
eis1-imkebu #


> Wie sieht die nut-Konfiguration für Deine USV jetzt genau aus?

***
#------------------------------------------------------------------------------

NUT_DO_DEBUG='no'

#------------------------------------------------------------------------------
# start settings
#------------------------------------------------------------------------------

START_NUT='yes'                        # activate nut: yes or no
NUT_CLIENT_MODE='no'                   # run in client mode
NUT_SERVER_MODE='yes'                  # run in server mode

#------------------------------------------------------------------------------
# client settings
#------------------------------------------------------------------------------

NUT_CLIENT_UPSMON_SYNO_CLIENT='no'     # activate Synology NAS client 
account
NUT_CLIENT_UPSMON_QNAP_CLIENT='no'     # activate QNAP NAS client account
NUT_CLIENT_UPSMON_UPSNAME='ups'        # name of ups to connect to
NUT_CLIENT_UPSMON_USER='monuser'       # login of upsmon user
NUT_CLIENT_UPSMON_PASS='monuser'       # password of upsmon user
NUT_CLIENT_UPSMON_SERVER_IP=''         # NUT server ip address

#------------------------------------------------------------------------------
# server settings
#------------------------------------------------------------------------------

NUT_SERVER_UPSMON_ADMIN_USER='admin'   # login of upsmon administrator
NUT_SERVER_UPSMON_ADMIN_PASS='admin'   # password of upsmon administrator
NUT_SERVER_N='1'                       # number of ups servers
NUT_SERVER_1_ACTIVE='yes'              # 1. active entry: yes or no
NUT_SERVER_1_COMMENT='my first ups'    #    description
NUT_SERVER_1_DRIVER='blazer_usb'       #    driver name
NUT_SERVER_1_PORT='/dev/ttyUSB0'       #    port number
NUT_SERVER_1_CABLE=''                  #    cable type
NUT_SERVER_1_UPSMON_SYNO_CLIENT='no'   #    activate Synology NAS client 
account
NUT_SERVER_1_UPSMON_SYNO_CLIENT_IP=''  #    Synology NAS client ip address
NUT_SERVER_1_UPSMON_QNAP_CLIENT='no'   #    activate QNAP NAS client account
NUT_SERVER_1_UPSMON_QNAP_CLIENT_IP=''  #    QNAP NAS client ip address
NUT_SERVER_1_UPSMON_CLIENT_N='0'       #    number of client accounts
NUT_SERVER_1_UPSMON_CLIENT_1_ACTIVE='no'
                                        #    1. active entry: yes or no
NUT_SERVER_1_UPSMON_CLIENT_1_USER='monuser'
                                        #       login of client account
NUT_SERVER_1_UPSMON_CLIENT_1_PASS='pass'
                                        #       password of client account
NUT_SERVER_1_UPSMON_CLIENT_1_IP=''     #       ip address of client account


NUT_SERVER_WEBGUI='yes'                #       activate web gui
NUT_SERVER_WEBGUI_DOCUMENT_ROOT='/data-1/web/nut/'

***

> Was wird angezeigt, wenn Du folgendes Skript aufrufst:
> /var/install/bin/nut-debug-driver-load

Load UPS driver in debug mode

Nbr name      driver         comment
   1 ups       blazer_usb

Please enter ups number (1-1) or (q)uit:?

> Wäre es dann nicht sinnvoll diese Information auszuwerten bzw. hier zu
> nennen? Wie sonst soll ich wissen was für Probleme beim Laden des
> Treibers auftreten.

Hab das Packet eben neu gestartet

***
│Oct  6 20:13:22 eis1-imkebu blazer_usb[16184]: Startup successful 
 
              │
│Oct  6 20:13:22 eis1-imkebu upsd[16199]: listening on 127.0.0.1 port 
3493 
               │
│Oct  6 20:13:22 eis1-imkebu upsd[16199]: Connected to UPS [ups]: 
blazer_usb-ups 
                   │
│Oct  6 20:13:22 eis1-imkebu upsd[16200]: Startup successful 
 
              │
│Oct  6 20:13:22 eis1-imkebu upsmon[16224]: Startup successful 
 
              │
│Oct  6 20:13:22 eis1-imkebu upsmon[16226]: UPS [ups at localhost:]: 
connect failed: Connection failure: Connection refused 
                   │
│Oct  6 20:13:22 eis1-imkebu upsmon[16226]: Communications with UPS 
ups at localhost: lost 
                 │
│Oct  6 20:13:22 eis1-imkebu upssched[16230]: Executing command: commbad 
 
             │
│Oct  6 20:13:27 eis1-imkebu upsmon[16226]: UPS [ups at localhost:]: 
connect failed: Connection failure: Connection refused 
                   │
│Oct  6 20:13:27 eis1-imkebu upsmon[16226]: UPS ups at localhost: is 
unavailable 
                   │
│Oct  6 20:13:27 eis1-imkebu upssched[16252]: Executing command: nocomm 
 
              │
│Oct  6 20:13:32 eis1-imkebu upsmon[16226]: UPS [ups at localhost:]: 
connect failed: Connection failure: Connection refused 
                   │
│Oct  6 20:13:37 eis1-imkebu upsmon[16226]: UPS [ups at localhost:]: 
connect failed: Connection failure: Connection refused

***

Gruß
Andreas