[Eisfair_dev] [e1] eiskernel 4.1.3 (Status 'testing') verfügbar - 4.9er Kernel für eisfair-1
Dirk Alberti
Howy-1 at gmx.de
Sa Dez 7 12:35:17 CET 2019
Hallo Thomas,
Am 06.12.19 um 21:13 schrieb Thomas Bork:
> Hi @all,
>
> es ist eine Version 4.1.3 von eiskernel mit dem Status 'testing' für
> eisfair-1 verfügbar.
nachdem die Umstellung vom aktuellen 3er auf den 4er Kernel bei meinem
kleinen Scannerserver (600er VIA-Epia) so problemlos vonstatten ging
(Kernel 4.1.2-SMP), habe ich das nun auch auf meinem großen Heimserver
durchgezogen (Kernel 4.1.3-PAE).
Der große Server läuft ohne Probleme.
Nur das neue Update auf dem kleinen Server macht Probleme:
--------------------------------------------------
Installation of: eiskernel-smp (4.1.3) ...
Your lilo configuration is broken!
This is the output from the test with 'lilo -t':
Fatal: raid_setup:
stat("/dev/disk/by-id/ata-TS8GCF133_625736CB2361DF000029_")
Repair your lilo configuration, cancelling installation.
-------------------------------------------------
Könnte der hintere "Unterstrich" bei der Disk-ID der Fehler sein? Ich
traue mich grad gar nicht den kleinen Server runterzufahren, zumal ich
da keinen Monitor dran habe.
Zur Durchsicht:
scanner # ls /dev/disk/by-id
ata-TS8GCF133_625736CB2361DF000029
ata-TS8GCF133_625736CB2361DF000029-part1
ata-TS8GCF133_625736CB2361DF000029-part2
scanner # cat /etc/lilo.conf
lba32
#boot = /dev/hda
boot = /dev/disk/by-id/ata-TS8GCF133_625736CB2361DF000029_
read-only
prompt
timeout = 50
vga = normal
menu-scheme = wr:bw:wr:Yr
image = /boot/kernel
#root = /dev/hda2
root = "UUID=566bfcff-92f6-40db-b74a-bdc9b358fa90"
label = eis
initrd = /boot/initrd.gz
append = "ide-core.nodma=0.0 hda=nodma ide=nodma ide0=nodma libata.dma=0
longhaul.enable=1 raid=noautodetect"
image = /boot/old-kernel
#root = /dev/hda2
root = "UUID=566bfcff-92f6-40db-b74a-bdc9b358fa90"
label = oldeis
initrd = /boot/old-initrd.gz
append = "ide-core.nodma=0.0 hda=nodma ide=nodma ide0=nodma libata.dma=0
longhaul.enable=1 raid=noautodetect"
image = /boot/kernel-3.16.70-SMP
#root = /dev/hda2
root = "UUID=566bfcff-92f6-40db-b74a-bdc9b358fa90"
label = 3.16.70-SMP
initrd = /boot/initrd-3.16.70-SMP.gz
append = "ide-core.nodma=0.0 hda=nodma ide=nodma ide0=nodma libata.dma=0
longhaul.enable=1 raid=noautodetect"
image = /boot/kernel-3.16.74-SMP
#root = /dev/hda2
root = "UUID=566bfcff-92f6-40db-b74a-bdc9b358fa90"
label = 3.16.74-SMP
initrd = /boot/initrd-3.16.74-SMP.gz
append = "ide-core.nodma=0.0 hda=nodma ide=nodma ide0=nodma libata.dma=0
longhaul.enable=1 raid=noautodetect"
scanner # cat /etc/fstab
UUID=566bfcff-92f6-40db-b74a-bdc9b358fa90 / ext4 defaults 0 0
UUID=a3f36e71-cce1-49b0-b281-15f1e6d58647 /boot ext4 defaults 0 0
proc /proc proc defaults 0 0
#/dev/fd0 /media/floppy auto defaults,user,noauto 0 0
#/dev/cdrom /media/cdrom iso9660 defaults,ro,user,noauto 0 0
devpts /dev/pts devpts defaults,gid=5,mode=620 0 0
/sys /sys sysfs defaults 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
tmpfs /run tmpfs defaults 0 0
tmpfs /tmp tmpfs nosuid 0 0
tmpfs /var/log tmpfs defaults 0 0
devtmpfs /dev devtmpfs mode=0755,nosuid 0 0
none /proc/bus/usb usbfs defaults 0 0
scanner # blkid
/dev/sda1: UUID="a3f36e71-cce1-49b0-b281-15f1e6d58647" TYPE="ext4"
PARTLABEL="boot" PARTUUID="59ad0344-de41-46b7-a102-ad0f10db6991"
/dev/sda2: UUID="566bfcff-92f6-40db-b74a-bdc9b358fa90" TYPE="ext4"
PARTLABEL="root" PARTUUID="f5820541-0d5f-4efc-876c-e915ab43a1df"
scanner # df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 7.3G 855M 6.1G 13% /
tmpfs 495M 172K 495M 1% /run
devtmpfs 490M 8.0K 490M 1% /dev
/dev/sda1 43M 31M 8.2M 80% /boot
tmpfs 495M 0 495M 0% /run/shm
tmpfs 495M 0 495M 0% /tmp
tmpfs 495M 0 495M 0% /var/log
Mit dem Kernel 4.1.2 bootete das System ganz normal und beim Upgrade vom
3er Kernel gab es auch keine Probleme. Nur eben jetzt mit dem Update zu
4.1.3.
Gruß, Dirk
Mehr Informationen über die Mailingliste Eisfair_dev