[Eisfair_dev] hpaio scannen ja, aber Drucken NEIN!?
Taxena Gasparov
gastax at gmail.com
Di Nov 14 01:53:28 CET 2023
Hallo Holger,
Am 13.11.23 um 17:59 schrieb Holger Bruenjes:
> Ich habe jetzt nach viel Rekursion das 'hplip-scan-utils' Paket auf Pack-Eis abgelegt
Danke dir, 121 MB Abhängigkeiten ist stattlich.
Gibt einen Typo in python310-scikit-image.tar.bz2.info:
IST: <require-package>python310-packaging 3.4.2</require-package>
SOLL: <require-package>python310-packaging 3.4.0</require-package>
Habe die Pakete python310-scikit-image + hplip-scan-utils manuell/lokal installiert bekommen:
Ist nun noch eine Konfiguration vorzunehmen?
$ scanimage -T
-> bekannter Fehler
$ hp-scan -i
warning: hp-scan should not be run as root/superuser.
HP Linux Imaging and Printing System (ver. 3.23.8)
Scan Utility ver. 2.2
-----------------
| SELECT DEVICE |
-----------------
Num Scan device URI
-------- ------------------------------------------------------------------------------------------
0 hpaio:/usb/HP_Color_LaserJet_CM1312nfi_MFP?serial=001234567890
1 net:eis1...
Enter number 0...1 for device (q=quit) ?0
warning: No destinations specified. Adding 'file' destination by default.
Using device hpaio:/usb/HP_Color_LaserJet_CM1312nfi_MFP?serial=001234567890
Opening connection to device...
error: SANE: Error during device I/O (code=9)
$
$ hp-check -r
> /usr/bin/hp-check:685: SyntaxWarning: "is not" with a literal. Did you mean "!="?
> if 'getfacl' not in g and '' is not g and 'file' not in g:
> Saving output in log file: /tmp/hp-check.log
>
> HP Linux Imaging and Printing System (ver. 3.23.8)
> Dependency/Version Check Utility ver. 15.1
>
> Note: hp-check can be run in three modes:
> 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to
> successfully compile HPLIP.
> 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies
> installed to successfully run.
> 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).
>
> Check types:
> a. EXTERNALDEP - External Dependencies
> b. GENERALDEP - General Dependencies (required both at compile and run time)
> c. COMPILEDEP - Compile time Dependencies
> d. [All are run-time checks]
> PYEXT SCANCONF QUEUES PERMISSION
>
> Status Types:
> OK
> MISSING - Missing Dependency or Permission or Plug-in
> INCOMPAT - Incompatible dependency-version or Plugin-version
> warning: 0-3.4.4 version is not supported. Using 0-0 versions dependencies to verify and install...
>
> ---------------
> | SYSTEM INFO |
> ---------------
> Kernel: 5.15.137-eisfair-1-SMP #1 SMP Tue Nov 7 23:14:26 CET 2023 GNU/Linux
> Host: eis1
> Proc: 5.15.137-eisfair-1-SMP #1 SMP Tue Nov 7 23:14:26 CET 2023 GNU/Linux
> Distribution: 0 3.4.4
> Bitness: 32 bit
>
>
> -----------------------
> | HPLIP CONFIGURATION |
> -----------------------
>
> HPLIP-Version: HPLIP 3.23.8
> HPLIP-Home: /usr/share/hplip
> warning: HPLIP-Installation: Auto installation is not supported for 0 distro 3.4.4 version
>
> Current contents of '/etc/hp/hplip.conf' file:
> # hplip.conf. Generated from hplip.conf.in by configure.
>
> [hplip]
> version=3.23.8
>
> [dirs]
> home=/usr/share/hplip
> run=/var/run
> ppd=/usr/share/cups/model/manufacturer-PPDs/hplip
> ppdbase=/usr/share/cups/model/manufacturer-PPDs
> doc=/usr/share/doc/packages/hplip
> html=/usr/share/doc/packages/hplip
> icon=/usr/share/applications
> cupsbackend=/usr/lib/cups/backend
> cupsfilter=/usr/lib/cups/filter
> drv=/usr/lib/cups/driver
> bin=/usr/bin
> apparmor=/etc/apparmor.d
> # Following values are determined at configure time and cannot be changed.
> [configure]
> network-build=no
> libusb01-build=no
> pp-build=no
> gui-build=yes
> scanner-build=yes
> fax-build=yes
> dbus-build=yes
> cups11-build=no
> doc-build=yes
> shadow-build=no
> hpijs-install=yes
> foomatic-drv-install=no
> foomatic-ppd-install=yes
> foomatic-rip-hplip-install=no
> hpcups-install=yes
> cups-drv-install=no
> cups-ppd-install=yes
> internal-tag=3.23.8
> restricted-build=no
> ui-toolkit=qt5
> qt3=no
> qt4=no
> qt5=yes
> policy-kit=no
> lite-build=no
> udev_sysfs_rules=no
> hpcups-only-build=no
> hpijs-only-build=no
> apparmor_build=no
> class-driver=no
>
>
> Current contents of '/var/lib/hp/hplip.state' file:
> Plugins are not installed. Could not access file: No such file or directory
>
> Current contents of '~/.hplip/hplip.conf' file:
> warning: Could not access file: No such file or directory
> <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
>
> -------------------------
> | External Dependencies |
> -------------------------
> cups CUPS - Common Unix Printing System REQUIRED 1.1 2.4.2 OK 'CUPS Scheduler is running' gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.56.1 OK -
> error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed' scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.2.1 OK - error: dbus DBus - Message bus system REQUIRED - 1.14.6 MISSING 'DBUS may not be installed or not running'
> error: policykit PolicyKit - Administrative policy framework OPTIONAL - - MISSING 'policykit needs to be installed' network network -wget OPTIONAL - 1.21.3 OK -
> error: avahi-utils avahi-utils OPTIONAL - - MISSING 'avahi-utils needs to be installed'
>
> ------------------------
> | General Dependencies |
> ------------------------
>
> error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed' error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.4.2 MISSING 'cups-devel needs to be installed' error: cups-image CUPS image - CUPS image development files REQUIRED - 2.4.2 MISSING 'cups-image needs to be installed'
> error: libpthread libpthread - POSIX threads library REQUIRED - b'2.37' MISSING 'libpthread needs to be installed'
> error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
> sane SANE - Scanning library REQUIRED - - OK -
> error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
> error: libavahi-dev libavahi-dev REQUIRED - - MISSING 'libavahi-dev needs to be installed'
> error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed' error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 3.1.4 MISSING 'libcrypto needs to be installed' python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.10.12 OK -
> error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed'
> error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
> error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
> python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.3.2 OK -
> python3-xml Python XML libraries REQUIRED - 2.5.0 OK - error: python3-devel Python devel - Python development files REQUIRED 2.2 3.10.12 MISSING 'python3-devel needs to be installed'
> python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 9.5.0 OK -
> error: python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 - MISSING 'python3-reportlab needs to be installed'
>
> --------------
> | COMPILEDEP |
> --------------
>
> error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
> error: gcc gcc - GNU Project C and C++ Compiler REQUIRED - - MISSING 'gcc needs to be installed'
> error: make make - GNU make utility to maintain groups of programs REQUIRED 3.0 - MISSING 'make needs to be installed'
>
> ---------------------
> | Python Extentions |
> ---------------------
>
> cupsext CUPS-Extension REQUIRED - 3.23.8 OK -
> hpmudext IO-Extension REQUIRED - 3.23.8 OK -
>
> ----------------------
> | Scan Configuration |
> ----------------------
>
> hpaio HPLIP-SANE-Backend REQUIRED - 3.23.8 OK 'hpaio found in /etc/sane.d/dll.conf'
> scanext Scan-SANE-Extension REQUIRED - 3.23.8 OK -
>
> ------------------------------
> | DISCOVERED SCANNER DEVICES |
> ------------------------------
> device `hpaio:/usb/HP_Color_LaserJet_CM1312nfi_MFP?serial=00CNB886DN3V' is a Hewlett-Packard HP_Color_LaserJet_CM1312nfi_MFP all-in-one
> device `net:ka-eis1.swuskas.goip.de:hpaio:/usb/HP_Color_LaserJet_CM1312nfi_MFP?serial=001234567890' is a Hewlett-Packard HP_Color_LaserJet_CM1312nfi_MFP all-in-one
>
>
> --------------------------
> | DISCOVERED USB DEVICES |
> --------------------------
> Device URI Model
> ----------------------------------------------------------- ------------------------------------
> hp:/usb/HP_Color_LaserJet_CM1312nfi_MFP?serial=001234567890 HP Color LaserJet CM1312nfi MFP
>
> ---------------------------------
> | INSTALLED CUPS PRINTER QUEUES |
> ---------------------------------
>
> usbpr1
> ------
> Type: Unknown
> Device URI: localhost
>
> all
> ---
> Type: Unknown
> Device URI: localhost
>
>
> --------------
> | PERMISSION |
> --------------
> USB None Required - - OK Node:'/dev/bus/usb/001/003' Perm:' root lp rw- rw- r--'
> -----------
> | SUMMARY |
> -----------
>
> Missing Required Dependencies
> -----------------------------
> None
>
> Missing Optional Dependencies
> -----------------------------
> None
>
>
> Total Errors: 21
> Total Warnings: 1
>
>
> Done.
In /var/log/messages wird noch folgendes bei Aufruf von "hp-check -r" gelogt:
> 258 Nov 14 00:33:36 ka-eis1 hp-check: hp-check[25212]: warning: 0-3.4.4 version is not supported. Using 0-0 versions dependencies to verify and install...
> 259 Nov 14 00:33:37 ka-eis1 hp-check: hp-check[25212]: warning: HPLIP-Installation: Auto installation is not supported for 0 distro 3.4.4 version
> 260 Nov 14 00:33:37 ka-eis1 hp-check: hp-check[25212]: warning: Could not access file: No such file or directory
> 261 Nov 14 00:33:40 ka-eis1 saned[26050]: saned (AF-indep+IPv6) from sane-backends 1.2.1 starting up
> 262 Nov 14 00:33:40 ka-eis1 saned[26050]: check_host: access by remote host: ::ffff:192.168.7.22
> 263 Nov 14 00:33:40 ka-eis1 saned[26050]: init: access granted to saned-user@::ffff:192.168.7.22
> 264 Nov 14 00:33:40 ka-eis1 saned[26050]: saned exiting
> 265 Nov 14 00:33:40 ka-eis1 hp-check: io/hpmud/musb.c 2187: [25212] hpmud_make_usb_uri() bus=001 dev=003
> 266 Nov 14 00:33:40 ka-eis1 hp-check: io/hpmud/musb.c 2284: hpmud_make_usb_uri() uri=hp:/usb/HP_Color_LaserJet_CM1312nfi_MFP?serial=001234567890 bytes_read=59
Hast du einen Verdacht? Welche Test kann ich ggf. noch machen?
Taxi
Mehr Informationen über die Mailingliste Eisfair_dev