[Eisfair] Al?==?utf-8?Q?ten Eisfair Base 1.7.4 upd?==?utf-8?Q?aten

[Mario Reisinger]

Marcus Roeckrath schrieb am Do, 19 Dezember 2013 18:00
> Welchen Festplattentyp hast Du im Rechner?


/dev/hda:

 Model=ST3750640AS, FwRev=3.AAE, SerialNo=3QD19YLT
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
 BuffType=unknown, BuffSize=16384kB, MaxMultSect=16, MultSect=16
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=1465149168
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4
 DMA modes:  mdma0 mdma1 mdma2
 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma6
 AdvancedPM=no WriteCache=enabled
 Drive conforms to: Unspecified:  ATA/ATAPI-1,2,3,4,5,6,7

Seagate Barracude 7200.10 Sata


Zitat:
> Bitte die /etc/lilo.conf hier posten.


lba32
disk = /dev/hda
  bios = 0x80
boot = /dev/hda
read-only
prompt
timeout = 50
vga = normal
menu-scheme = wr:bw:wr:Yr
image = /boot/kernel
root = /dev/hda3
label = eis
initrd = /boot/initrd.gz
append = "raid=noautodetect"
image = /boot/old-kernel
root = /dev/hda3
label = oldeis
initrd = /boot/old-initrd.gz
append = "raid=noautodetect"
image = /boot/kernel-2.4.35-wt1
root = /dev/hda3
label = 2.4.35-wt1
initrd = /boot/initrd-2.4.35-wt1.gz
append = "raid=noautodetect"


LG Mario