[Eisfair] Testau?==?utf-8?Q?fruf: Neue/aktualisierte Se?==?utf-8?Q?nsor-Kern?==?utf-8?Q?elmodule

[Eike Bastiansson]

Eike Bastiansson schrieb am Mi, 05 Juni 2013 00:11
> Marcus Roeckrath schrieb am Di, 04 Juni 2013 15:05
> > Danke, auf http://www.lm-sensors.org/wiki/Configurations sammeln
> > sie auch
> > gerne spezielle Boardkonfigurationen und Dein Board fehlt da
> > noch:
> 
> 
> Ich werde es dort auch noch mal zur Einpflege anbieten.


Ich habe meine Konfiguration jetzt noch mal etwas allgemeiner
überarbeitet und in dieser Form auch an lm-sensors <at> lm-sensors
<dot> org geschickt:
#
# Sensors configuration
#
# SUITABLE FOR:
# Supermicro® X7SPA-H-D525
# Supermicro® X7SPA-HF-D525
# Supermicro® X7SPE-H-D525
# Supermicro® X7SPE-HF-D525
#
# ATTENTION: On X7SPA-HF-D525 and X7SPE-HF-D525 Models,
# the Baseboard Management Controller (BMC) has to be
# deactivated by jumper in order to avoid concurrent
# access to the w83627dhg sensors chip! (Please Refer
# to your mainboard manual, to locate the BMC jumper)
#
# Default voltage range: +/- 10%
# Battery voltage range: +/- 20%
# Temperature hysteresis threshold: 5°C below max
#

# Winbond W83627DHG Super IO Sensors
chip "w83627dhg-*"

	label in0 "CPU Vcore"
		# Intel® Atom™ processor D525 Specifications
(http://ark.intel.com/products/49490)
		set in0_min  0.8
		set in0_max  1.175
	label in1 "Vichcore"
		set in1_min  1.05 * 0.90
		set in1_max  1.05 * 1.10
	label in2 "AVCC"
		set in2_min  3.3 * 0.90
		set in2_max  3.3 * 1.10
	label in3 "+3.3VCC"
		set in3_min 3.3 * 0.90
		set in3_max 3.3 * 1.10
	label in4 "VDIMM"
		set in4_min 1.5 * 0.90
		set in4_max 1.5 * 1.10
	label in5 "+5V"
		compute in5 @*(32/8), @/(32/8)
		set in5_min 5 * 0.90
		set in5_max 5 * 1.10
	label in6 "+12V"
		compute in6 @*(53/8),@/(53/8)
		set in6_min 12 * 0.90
		set in6_max 12 * 1.10
	label in7 "+3.3VSB"
		set in7_min 3.3 * 0.90
		set in7_max 3.3 * 1.10
	label in8 "VBAT"
		set in8_min 3 * 0.80
		set in8_max 3 * 1.20

	ignore fan1
	label fan2 "Case Fan"
	ignore fan3
	label fan4 "PSU Fan"
	ignore fan5

	label temp1 "System Temp"
		# Intel® ICH9 Thermal Specifications
(http://www.intel.com/content/dam/doc/design-guide/io-controller-hub-9-family-guidelines.pdf)
		set temp1_max 96
		set temp1_max_hyst 91
	label temp2 "CPU Temp"
		# Intel® Atom™ processor D525 Specifications
(http://ark.intel.com/products/49490)
		set temp2_max 100
		set temp2_max_hyst 95
	label temp3 "Case Temp"
		# Supermicro® X7SPE-HF-D525 Environmental Specifications
(http://www.supermicro.com/products/motherboard/atom/ich9/x7spe-hf-d525.cfm)
		set temp3_max 55
		set temp3_max_hyst 50

	ignore cpu0_vid
	ignore intrusion0

Grüße,

Eike