[Eisfair] eisfair für raspberry

Stefan Puschek stefan.puschek at t-online.de
So Mär 18 12:18:27 CET 2018


Hallo Marcus,
...
>> nachdem dieses Wiki
>>
> (https://wiki.alpinelinux.org/wiki/Classic_install_or_sys_mode_on_Raspberry_Pi)
>> so nicht zum Erfolg führt, poste ich mal Schritt für Schritt was ich
>> gemacht habe (vielleicht ist dort ja ein Fehler):
>>
>> Unter Linux Mint, das in einer VirtualBox läuft, habe ich mit GParted
>> die Partitionen auf der 64GB Micro SDKarte erstellt.
>> Die FAT Partition habe ich boot und lba gelabelt.
> 
> Was heisst "gelabelt"?
> 
> Die Partition braucht das Boot-Flag und bei Type mit LBA vermerkt sein, also
> etwa so:
> 
> fdisk -l <device>
> 
> Device     Boot Start      End  Sectors  Size Id Type
> /dev/sdb1  *     2048 30228479 30226432 14,4G  c W95 FAT32 (LBA)

das boot-flag ist nicht nötig - hier mein Fernseher:

(raspbian 9 stretch)

root at terrance:~# fdisk -l /dev/mmcblk0
Disk /dev/mmcblk0: 7,4 GiB, 7948206080 bytes, 15523840 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xd248edfc

Device         Boot Start      End  Sectors  Size Id Type
/dev/mmcblk0p1       2048    92159    90112   44M  c W95 FAT32 (LBA)
/dev/mmcblk0p2      92160 14499839 14407680  6,9G 83 Linux
root at terrance:~#

Groetjes
Stefan



Mehr Informationen über die Mailingliste Eisfair