[Eisfair] [e1] Fehler nach update auf base v2.8.5 und eiskernel-smp v4.4.0

[Holger Bruenjes]

Hallo Wolfgang

Am 14/01/2020 um 19.46 schrieb W. Loefstedt:

> eisfair # cat /etc/mdadm/mdadm.conf
> #----------------------------------------------------------------------------
> #  mdadm.conf file generated by mdadm version: 2.2.0
> #
> #  Do not edit this file, edit /etc/config.d/mdadm
> #  Creation date: 2016-04-06 Time: 14:55:23
> #----------------------------------------------------------------------------
> DEVICE /dev/hdc[1-9]
> ARRAY /dev/md1 level=raid1 devices=/dev/hdc1
> DEVICE /dev/hda[1-9]
> ARRAY /dev/md2 level=raid1 devices=/dev/hda2,/dev/hdc2
> ARRAY /dev/md3 level=raid1 devices=/dev/hda3
> PROGRAM /sbin/mdadm-event-handler.sh
> 
> 
> Erstaunlicherweise steht START_MDADM='no' in der /etc/config.d/mdadm!
> 
> 
> eisfair # cat /etc/config.d/mdadm
> #------------------------------------------------------------------------------
> # /etc/config.d/mdadm - configuration file for mdadm
> #
> # Creation   :  2011-10-02 hbfl
> # Last Update:  2019-08-14 root
> #
> # Copyright (c) 2001-2019 the eisfair team, team(at)eisfair(dot)org
> #
> # This program is free software; you can redistribute it and/or modify
> # it under the terms of the GNU General Public License as published by
> # the Free Software Foundation; either version 2 of the License, or
> # (at your option) any later version.
> #------------------------------------------------------------------------------
> 
> # mdadm-VERSION 2.8.3
> 
> #------------------------------------------------------------------------------
> # Basic configuration
> #------------------------------------------------------------------------------
> 
> START_MDADM='no'                  # Use yes or no
> 
> #------------------------------------------------------------------------------
> # Global settings
> #------------------------------------------------------------------------------
> 
> MDADM_DELAY='60'                  # Polling time, default = 60 sec
> MDADM_MAIL='root at allerstrasse.de' # Use: mailaddress from admin
> MDADM_SEND_MAIL_ON_START='no'     # Send email on start yes/no
> MDADM_SEND_EVENT_TO_SYSLOG='no'   # Send event messages to syslog yes/no
> MDADM_SEND_EVENT_MAIL='no'        # Send event messages as mail yes/no
> MDADM_SEND_STATUS_MAIL=''         # Send status messages with cron
> 
> #------------------------------------------------------------------------------
> # End
> #------------------------------------------------------------------------------
> 
> Wieso läuft der Raid eigentlich?

RAID wird vom Kernel gestartet bzw. von mdadm zusammen gebaut in der
initrd

Diese Angaben sind zum Monitoring


aber

mdadm --examine --scan


was kommt dabei rum


Holger