[Eisfair] VBOX nimmt keine Anrufe mehr entgegen

[Stephan Manske]

Hallo!

Ich kann leider nicht sagen, ob es an der vor kurzem geupdateten 
VBOX-Paket liegt oder an meiner heute neu installierten ISDN-Anlage. 
Aber jedenfalls nimmt VBOX keine Anrufe mehr an (und ich weiß nicht 
genau, seit wann) :-(

Ich habe auf dem EIS auch capi2text und nen Faxserver laufen. Beide 
sehen die Anrufe, die auf dem ISDN-Bus signalisiert werden, und Faxe 
werden auch angenommen und aufgezeichnet. Nur VBOX macht nix :-(

Ich bin über jede Hilfe dankbar.


Status zeigt:

│/etc/init.d/vbox status 
 
                                     │
│vbox auto-start at boot-time: enabled 
 
                                     │
│vboxgetty on port /dev/ttyI6 is running 
 
                                     │
│vboxgetty on port /dev/ttyI7 is running 
 
                                     │
│vboxd is running - no active session! 
 
                                     │
│vbox-call-control is not enabled 
 
                                     │
│vbox-rss-control is not enabled

die Logs:

May 18 03:23:25 eis kernel: capidrv-1: incoming call 0163776xxxx,1,1,51 
 

May 18 03:23:25 eis kernel: capidrv-1: patching si2=1 to 0 for VBOX 
 

May 18 03:23:25 eis kernel: isdn_net: call from 0163776xxxx -> 0 51 
ignored 

May 18 03:23:25 eis kernel: isdn_tty: call from 0163776xxxx, -> RING on 
ttyI7 

May 18 03:23:25 eis kernel: capidrv-1: incoming call 0163776xxxx,1,0,51 
tty alerting 

May 18 03:23:58 eis kernel: capidrv-1: DISCONNECT_IND reason 0x3490 (..) 
for plci 0x101




18-May 03:22:29 <I> -----------------------[Begin 
session]----------------------
18-May 03:22:29 <I> Running vbox version 2.0.0BETA5...
18-May 03:22:29 <I> Tcl interpreter version 8.4...
18-May 03:22:29 <D> Found command 'debuglevel = FEWIDJ' (-global-)...
18-May 03:22:29 <D> Found command 'port = /dev/ttyI6'...
18-May 03:22:29 <D> Found command 'port = /dev/ttyI7'...
18-May 03:22:29 <D> Found command 'modeminit = ATZ&B512&E51' (/dev/ttyI7)...
18-May 03:22:29 <D> Found command 'user = stm' (/dev/ttyI7)...
18-May 03:22:29 <D> Found command 'group = vbox' (/dev/ttyI7)...
18-May 03:22:29 <D> Found command 'spooldir = /var/spool/vbox/stm' 
(/dev/ttyI7)...
18-May 03:22:29 <I> User stm's messagebox is "/var/spool/vbox/stm"...
18-May 03:22:29 <I> User stm's vbox.conf is 
"/var/spool/vbox/stm/vbox.conf"...
18-May 03:22:29 <D> Setting "/var/spool/vbox/stm" to 2007.201 (0700)...
18-May 03:22:29 <D> Opening modem port "/dev/ttyI7"...
18-May 03:22:29 <D> Locking vboxgetty (/var/run/vboxgetty-ttyI7.pid)...
18-May 03:22:29 <D> Setting "/var/run/vboxgetty-ttyI7.pid" to 2007.201 
(0644)...
18-May 03:22:29 <D> Locking modem port (/var/lock/LCK..ttyI7)...
18-May 03:22:29 <D> Setting "/var/lock/LCK..ttyI7" to 2007.201 (0644)...
18-May 03:22:29 <I> Drop permissions to userid 2007; groupid 201...
18-May 03:22:29 <I> Initializing modem port (voice mode; 2500 ms)...
18-May 03:22:32 <D> Hangup modem (drop dtr 400 ms)...
18-May 03:22:32 <D> Flushing modem (timeout)...
18-May 03:22:32 <J> Setting modem speed to 57600...
18-May 03:22:32 <J> Setting modem flow control (HARD)...
18-May 03:22:32 <D> Flushing modem...
18-May 03:22:32 <D> Sending "ATZ&B512&E51"...
18-May 03:22:32 <J> Reading modem echo (4 secs timeout)...
18-May 03:22:32 <J> Reading modem input (4 secs timeout)...
18-May 03:22:32 <D> Waiting for "OK"... Got it.
18-May 03:22:32 <D> Flushing modem...
18-May 03:22:32 <D> Sending "AT+FCLASS=8"...
18-May 03:22:32 <J> Reading modem echo (4 secs timeout)...
18-May 03:22:32 <J> Reading modem input (4 secs timeout)...
18-May 03:22:32 <D> Waiting for "OK|VCON"... Got "OK" (1).
18-May 03:22:32 <D> Flushing modem...
18-May 03:22:32 <D> Sending "ATS13.2=1S13.4=1"...
18-May 03:22:32 <J> Reading modem echo (4 secs timeout)...
18-May 03:22:32 <J> Reading modem input (4 secs timeout)...
18-May 03:22:32 <D> Waiting for "OK|VCON"... Got "OK" (1).
18-May 03:22:32 <D> Flushing modem...
18-May 03:22:32 <I> Waiting...
18-May 03:23:25 <I> Wakeup!
18-May 03:23:25 <D> Checking free space on "/var/spool/vbox/stm"...
18-May 03:23:25 <J> -1918054400 bytes available; 2000000 bytes needed... 
enough.
18-May 03:23:25 <D> Getting number of rings to wait before answer call...
18-May 03:23:25 <J> Jumping to section "[RINGS]"...
18-May 03:23:25 <D> Parsing time(s) "*"...
18-May 03:23:25 <D> Range **:**:** - **:**:** (03:23:25): match.
18-May 03:23:25 <D> Parsing day(s) "*"...
18-May 03:23:25 <D> Range *: match.
18-May 03:23:25 <D> Call will be answered after 2 rings...
18-May 03:23:25 <J> Reading modem input (6 secs timeout)...
18-May 03:23:25 <I> [ 1/ 2] RING...
18-May 03:23:25 <J> Reading modem input (6 secs timeout)...
18-May 03:23:25 <D> Flushing modem...
18-May 03:23:25 <D> Sending "ATS20?"...
18-May 03:23:25 <J> Reading modem echo (4 secs timeout)...
18-May 03:23:25 <J> Reading modem input (4 secs timeout)...
18-May 03:23:25 <D> Got s-register 20 value "1".
18-May 03:23:25 <D> TEST-tmpline 163776xxxx
18-May 03:23:25 <D> TEST-tmpline-length 10
18-May 03:23:25 <D> Flushing modem...
18-May 03:23:25 <D> Sending "ATS21?"...
18-May 03:23:25 <J> Reading modem echo (4 secs timeout)...
18-May 03:23:25 <J> Reading modem input (4 secs timeout)...
18-May 03:23:25 <D> Got s-register 21 value "0".
18-May 03:23:25 <D> TEST-setup.voice.callerid 163776xxxx
18-May 03:23:25 <D> Searching user with caller number "163776xxxx"...
18-May 03:23:25 <J> Jumping to section "[CALLERIDS]"...
18-May 03:23:25 <D> Caller number match user "*** Unknown ***"...
18-May 03:23:25 <D> Section "[STANDARD]" will be used...
18-May 03:23:25 <D> Parsing settings from section "[STANDARD]"...
18-May 03:23:25 <J> Jumping to section "[STANDARD]"...
18-May 03:23:25 <D> Parsing time(s) "*"...
18-May 03:23:25 <D> Range **:**:** - **:**:** (03:23:25): match.
18-May 03:23:25 <D> Parsing day(s) "*"...
18-May 03:23:25 <D> Range *: match.
18-May 03:23:25 <J> Found Flag "RINGS=1"...
18-May 03:23:25 <J> Found Flag "TOLLRINGS=1"...
18-May 03:23:25 <J> Settings: Message 
"/var/spool/vbox/stm/messages/standard.msg".
18-May 03:23:25 <J> Settings: Beep "/var/spool/vbox/stm/messages/beep.msg".
18-May 03:23:25 <J> Settings: Timeout 
"/var/spool/vbox/stm/messages/timeout.msg".
18-May 03:23:25 <J> Settings: Script "/var/spool/vbox/stm/standard.tcl".
18-May 03:23:25 <J> Settings: Rings changed to 1.
18-May 03:23:25 <J> Settings: Rings changed to 1 if new message exist.
18-May 03:23:25 <J> Settings: Check for new messages in 
"/var/spool/vbox/stm/incoming".
18-May 03:23:25 <J> Settings: 180 secs record time.
18-May 03:23:25 <J> Settings: Answer call.
18-May 03:23:25 <J> Settings: Record a message.
18-May 03:23:25 <J> Settings: Play standard message.
18-May 03:23:25 <J> Settings: Play beep message.
18-May 03:23:25 <J> Settings: Play timeout message.
18-May 03:23:25 <I> [ 1/ 2] CALLER NUMBER: 163776xxxx (*** Unknown ***)...
18-May 03:23:25 <D> New number of rings from "vboxrc" are 1...
18-May 03:23:25 <J> Reading modem input (6 secs timeout)...
18-May 03:23:31 <J> Modem timeout function called...
18-May 03:23:31 <J> Can't read from modem [0] (timeout).
18-May 03:23:31 <I> Initializing modem port (voice mode; 2500 ms)...
18-May 03:23:34 <D> Hangup modem (drop dtr 400 ms)...
18-May 03:23:34 <D> Flushing modem (timeout)...
18-May 03:23:34 <J> Junk: <CR>
18-May 03:23:34 <J> Junk: <NL>
18-May 03:23:34 <J> Junk: R
18-May 03:23:34 <J> Junk: I
18-May 03:23:34 <J> Junk: N
18-May 03:23:34 <J> Junk: G
18-May 03:23:34 <J> Junk: <CR>
18-May 03:23:34 <J> Junk: <NL>
18-May 03:23:34 <J> Setting modem speed to 57600...
18-May 03:23:34 <J> Setting modem flow control (HARD)...
18-May 03:23:34 <D> Flushing modem...
18-May 03:23:34 <D> Sending "ATZ&B512&E51"...
18-May 03:23:34 <J> Reading modem echo (4 secs timeout)...
18-May 03:23:34 <J> Reading modem input (4 secs timeout)...
18-May 03:23:34 <D> Waiting for "OK"... Got it.
18-May 03:23:34 <D> Flushing modem...
18-May 03:23:34 <D> Sending "AT+FCLASS=8"...
18-May 03:23:34 <J> Reading modem echo (4 secs timeout)...
18-May 03:23:34 <J> Reading modem input (4 secs timeout)...
18-May 03:23:34 <D> Waiting for "OK|VCON"... Got "OK" (1).
18-May 03:23:34 <D> Flushing modem...
18-May 03:23:34 <D> Sending "ATS13.2=1S13.4=1"...
18-May 03:23:34 <J> Reading modem echo (4 secs timeout)...
18-May 03:23:34 <J> Reading modem input (4 secs timeout)...
18-May 03:23:34 <D> Waiting for "OK|VCON"... Got "OK" (1).
18-May 03:23:34 <D> Flushing modem...
18-May 03:23:34 <I> Waiting...