[Eisfair] [eis 2.8.25] stürzt täglich ab / html2ps / gzip / libpq5 / netdate / ntp
Daniel Kubein
kuba_ at web.de
Sa Aug 14 20:33:45 CEST 2021
Hallo Marcus,
> Hallo Daniel,
>
> Daniel Kubein wrote:
>
>>>> eis 2.8.25 # smartctl -a /dev/sdb
>>>> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
>>>> UPDATED WHEN_FAILED RAW_VALUE
>>>> 5 Reallocated_Sector_Ct 0x0033 002 002 036 Pre-fail
>>>> Always FAILING_NOW 4032
>
> Du hast diese echt kritische SMART-Meldung registriert?
>
>>> alleine würde mir Angst machen.
Ja, aber aus Unwissenheit heraus macht sie mir auch keine Angst.
Was soll es denn bedeuten?
>>> Mach mal einen Selftest:
>>>
>>> smartctl -t long /dev/sdb
>>>
>>> und dann schauen ob ein smartctl -a da irgendwann Vollzug anzeigt.
>>>
smartctl -t long /dev/sdb
Hatte ich eingegeben und nach drei Stunden kam das Ergebnis ->
eis 2.8.25 # smartctl -a /dev/sdb
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.55-eisfair-64-VIRT]
(local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12
Device Model: ST31000528AS
Serial Number: 9VP7YK4C
LU WWN Device Id: 5 000c50 020929bdb
Firmware Version: CC44
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sat Aug 14 20:32:47 2021 CEST
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/213891en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 73) The previous self-test completed
having
a test element that failed and
the test
element that failed is not known.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 188) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control
supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail
Always - 158673331
3 Spin_Up_Time 0x0003 095 094 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 96
5 Reallocated_Sector_Ct 0x0033 002 002 036 Pre-fail
Always FAILING_NOW 4032
7 Seek_Error_Rate 0x000f 062 059 030 Pre-fail
Always - 103126925281
9 Power_On_Hours 0x0032 080 080 000 Old_age
Always - 17798
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 96
183 Runtime_Bad_Block 0x0000 100 100 000 Old_age
Offline - 0
184 End-to-End_Error 0x0032 001 001 099 Old_age Always
FAILING_NOW 496
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
188 Command_Timeout 0x0032 100 096 000 Old_age Always
- 66
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0022 046 041 045 Old_age Always
In_the_past 54 (Min/Max 27/55 #745)
194 Temperature_Celsius 0x0022 054 059 000 Old_age Always
- 54 (0 1 0 0 0)
195 Hardware_ECC_Recovered 0x001a 042 008 000 Old_age Always
- 158673331
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age
Offline - 17937 (174 203 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age
Offline - 3514529780
242 Total_LBAs_Read 0x0000 100 253 000 Old_age
Offline - 1886636858
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: unknown failure 90% 17798
0
# 2 Extended offline Completed: unknown failure 90% 17791
0
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
eis 2.8.25 #
Gruß Daniel
Mehr Informationen über die Mailingliste Eisfair