[Eisfair] SANE mit scanbd oder scanbuttond

[Stefan Puschek]

Korrektur...
> Hallo Holger,
> 
> Am 13.02.21 um 15:54 schrieb Holger Bruenjes:
>> Hallo Stefan
>>
>> Am 13/02/2021 um 15.45 schrieb Stefan Puschek:
>>
jetzt muss ich nur noch phpsane (scannen im Browser) wieder ans fliegen 
kriegen...
> 
> da ist etwas verstellt worden;
> 
> wie geschrieben: phpsane macht den am Server angeschlossenen Scanner im 
> Browser verfügbar...
> 
> leider geht das nun nicht mehr:
> No scanners were identified.
> If you were expecting something different, check that the scanner is 
> plugged in, turned on and detected by the sane-find-scanner tool (if 
> appropriate).
> Please read the documentation which came with this software (README, 
> FAQ, manpages).
> 
> leider kann der user des Apachen (wwwrun) nicht scannen:
> barbrady # whoami
> wwwrun
> barbrady # sane-find-scanner
> 
>    # sane-find-scanner will now attempt to detect your scanner. If the
>    # result is different from what you expected, first make sure your
>    # scanner is powered up and properly connected to your computer.
> 
>    # No SCSI scanners found. If you expected something different, make 
> sure that
>    # you have loaded a kernel SCSI driver for your SCSI adapter.
>    # Also you need support for SCSI Generic (sg) in your operating system.
>    # If using Linux, try "modprobe sg".
> 
> could not open USB device 0x1d6b/0x0003 at 002:001: Access denied 
> (insufficient permissions)
> could not open USB device 0x04a9/0x220d at 001:002: Access denied 
> (insufficient permissions)
> could not open USB device 0x1d6b/0x0002 at 001:001: Access denied 
> (insufficient permissions)
>    # No USB scanners found. If you expected something different, make 
> sure that
>    # you have loaded a kernel driver for your USB host controller and 
> have setup
>    # the USB system correctly. See man sane-usb for details.
> 
>    # Not checking for parallel port scanners.
> 
>    # Most Scanners connected to the parallel port or other proprietary 
> ports
>    # can't be detected by this program.
> 
>    # You may want to run this program as root to find all devices. Once you
>    # found the scanner devices, be sure to adjust access permissions as
>    # necessary.
> barbrady #
> 
> bisher ging das - wie kriege ich das wieder hin?
> 
> 
>> scanbuttond kannst du wieder installieren
> 
> der war schon drauf - und nach einem reboot geht der auch wieder.
> 
> Groetjes
> Stefan