[Eisfair] Ne?==?utf-8?Q?uinstallation IDE

[Sebastian Ertz]

cat /etc/lilo.conf:
 #-----------------------------------------------------------------------
------
# /etc/lilo.conf - lilo bootloader configuration
# created: 2021-03-21 14:36:13
 #-----------------------------------------------------------------------
------

lba32
#boot = /dev/hda
boot = /dev/disk/by-id/ata-CF_CARD_1GB_CF1GB_00001281
read-only
prompt
timeout = 50
vga = normal
menu-scheme = wr:bw:wr:Yr
image = /boot/kernel
  #root = /dev/hda2
  root = "UUID=b2236c10-8fba-49c2-b9b9-ce15029c5470"
  label = eis
  initrd = /boot/initrd.gz
  append = "raid=noautodetect console=ttyS0,38400n8"
image = /boot/kernel-4.9.261-eisfair-1-SMP
  #root = /dev/hda2
  root = "UUID=b2236c10-8fba-49c2-b9b9-ce15029c5470"
  label = 4.9.261-SMP
  initrd = /boot/initrd-4.9.261-eisfair-1-SMP.gz
  append = "raid=noautodetect console=ttyS0,38400n8"
image = /boot/kernel-4.9.255-eisfair-1-SMP
  #root = /dev/hda2
  root = "UUID=b2236c10-8fba-49c2-b9b9-ce15029c5470"
  label = 4.9.255-SMP
  initrd = /boot/initrd-4.9.255-eisfair-1-SMP.gz
  append = "raid=noautodetect console=ttyS0,38400n8"
image = /boot/kernel-3.16.74-eisfair-1-SMP
  #root = /dev/hda2
  root = "UUID=b2236c10-8fba-49c2-b9b9-ce15029c5470"
  label = 3.16.74-SMP
  initrd = /boot/initrd-3.16.74-eisfair-1-SMP.gz
  append = "raid=noautodetect console=ttyS0,38400n8"

blkid:
/dev/hda1: UUID="2d67a8eb-cc1a-429d-8a9d-a6c6a62d9a6e" TYPE="ext4"
PARTLABEL="boot" PARTUUID="62a9fb27-b649-4c54-8d4b-51a5b5ec0d5f"
/dev/hda2: UUID="b2236c10-8fba-49c2-b9b9-ce15029c5470" TYPE="ext4"
PARTLABEL="root" PARTUUID="475b740a-59fc-41d3-8923-d796f80d49ce"

mkliloconf --generate-new:
Added eis  +  *
Added 4.9.261-SMP  +
Added 4.9.255-SMP  +
Added 3.16.74-SMP

Note:
A new /etc/lilo.conf was written containing standard sections
according to a normal updated eisfair installation.

You will find your old boot configuration in /etc/lilo.conf.OLD.
You have to put your own boot options into /etc/lilo.conf manually
before you reboot.
Do not forget to run 'lilo' on the command line afterwards if you
changed /etc/lilo.conf!

cat /etc/lilo.conf:
 #-----------------------------------------------------------------------
------
# /etc/lilo.conf - lilo bootloader configuration
# created: 2021-03-21 15:13:13
 #-----------------------------------------------------------------------
------

lba32
#boot = /dev/hda
boot = /dev/disk/by-id/ata-CF_CARD_1GB_CF1GB_00001281
read-only
prompt
timeout = 50
vga = normal
menu-scheme = wr:bw:wr:Yr
image = /boot/kernel
  #root = /dev/hda2
  root = "UUID=b2236c10-8fba-49c2-b9b9-ce15029c5470"
  label = eis
  initrd = /boot/initrd.gz
  append = "raid=noautodetect console=ttyS0,38400n8"
image = /boot/kernel-4.9.261-eisfair-1-SMP
  #root = /dev/hda2
  root = "UUID=b2236c10-8fba-49c2-b9b9-ce15029c5470"
  label = 4.9.261-SMP
  initrd = /boot/initrd-4.9.261-eisfair-1-SMP.gz
  append = "raid=noautodetect console=ttyS0,38400n8"
image = /boot/kernel-4.9.255-eisfair-1-SMP
  #root = /dev/hda2
  root = "UUID=b2236c10-8fba-49c2-b9b9-ce15029c5470"
  label = 4.9.255-SMP
  initrd = /boot/initrd-4.9.255-eisfair-1-SMP.gz
  append = "raid=noautodetect console=ttyS0,38400n8"
image = /boot/kernel-3.16.74-eisfair-1-SMP
  #root = /dev/hda2
  root = "UUID=b2236c10-8fba-49c2-b9b9-ce15029c5470"
  label = 3.16.74-SMP
  initrd = /boot/initrd-3.16.74-eisfair-1-SMP.gz
  append = "raid=noautodetect console=ttyS0,38400n8"