[Eisfair] USB-Stick vom ISO erstellen

[Stefan Puschek]

Hallo Andreas,

es läuft:

es sieht zwar optisch seltsam aus (woher kommt das '-e' und die vielen
Leerzeilen dazwioschen???) aber man kann es benutzen!

------------------

Linux cartman 5.10.0-17-amd64 #1 SMP Debian 5.10.136-1 (2022-08-13)
x86_64

The programs included with the Debian GNU/Linux system are free
software; the exact distribution terms for each program are described
in the individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Tue Aug 23 11:33:05 2022 from 192.168.6.3
root at cartman:~# mkdir -p /eisfair-iso
root at cartman:~# modprobe loop
root at cartman:~# mount -o loop
/tmp/eisfair-2.8.25-6.1.9-SMP-cd-image.iso /eisfair-iso/ mount:
/eisfair-iso: WARNING: source write-protected, mounted read-only.
root at cartman:~# /eisfair-iso/unix/mkusb-stick.sh -e 
-e Search for USB device

-e Checking USB drivers ...
Looking up devices ...
sda
-e 
























-e Found USB device.

-e -e   Nr   Device      Description          Size 
-e    1   /dev/sda    SanDisk Ultra        30031872 
   2   /dev/sda1   b Win95 FAT32        30030848 

Select (1-2, ENTER=Return, 0=Exit)? 1

Selected device: /dev/sda

-e Press ENTER to continue 
-e Prepare USB-Stick ...
-e 1+0 Datensätze ein
1+0 Datensätze aus
512 Bytes kopiert, 0,00321447 s, 159 kB/s

Disk /dev/sda: 29328 cylinders, 64 heads, 32 sectors/track
 /dev/sda: unrecognized partition
Old situation:
No partitions found
New situation:
Units = megabytes of 1048576 bytes, blocks of 1024 bytes, counting from
0

   Device Boot Start   End     MB   #blocks   Id  System
/dev/sda1   *     0+ 29327  29328- 30031856    b  Win95 FAT32
/dev/sda2         0      -      0         0    0  Empty
/dev/sda3         0      -      0         0    0  Empty
/dev/sda4         0      -      0         0    0  Empty
Successfully wrote the new partition table

Re-reading the partition table ...

-e Formatting with Fat 32
-e mkfs.fat 4.2 (2021-01-31)
-e Copy files, please wait.
-e 
-e Note:
Booting from this USB stick can take several minutes due to the size of
the initial ramdisk image. During this time the system appears to be 
frozen. Please remain calm and do not interrupt the start-up process
until the loading process is complete.

-e Prepare done.
-e root at cartman:~# ^C
root at cartman:~# 

---------------------------------

Wo ist denn bei Dir der erste Fehler?

Kannst Du mal einen ähnlichen Mitschnitt liefern?

Groetjes
Stefan