[Eisfair] [e64] Installation mit USB-Stick schlägt fehlt
Fabian Törner
fabian at toerners.eisfair.net
Fr Mär 10 17:55:42 CET 2023
Hallo zusammen,
gibt es hier noch etwas, was ich tun kann?
Würde die neue HW gern in Betrieb nehmen... evtl. sind dann meine
anderen Probleme auch gelöst :/ ;)
oder soll ich dafür nen neuen Faden auf machen?
Vielen Dank & viele Grüße
Fabian
Am 09.03.2023 um 15:01 schrieb Fabian Törner:
> Hallo zusammen,
>
> Am 08.03.2023 um 18:50 schrieb Fabian Törner:
>> habe nun ne alte radeon rein gesteckt damit gings dann.
>> Aber jetzt bleibt er beim Starten hängen - genau beim laden der drm
>> Treiber von der ati radeon - friert ein das System
>
> irgendwas stimmt da noch nicht :(
> Knoppix V9.1 von einem Stick startet (dmesg unten angehangen)
> leider kann ich keinen Text vom eisfair-boot hier reinkopieren, daher
> unliebsamerweise als Bild im Anhang.
>
>>
>>> Vielen Dank & viele Grüße
>>> Fabian
>
> knoppix at Microknoppix:~$ dmesg
> [ 1.190307] usbcore: registered new interface driver ums_eneub6250
> [ 1.190311] usbcore: registered new interface driver ums-freecom
> [ 1.190316] usbcore: registered new interface driver ums-isd200
> [ 1.190320] usbcore: registered new interface driver ums-jumpshot
> [ 1.190325] usbcore: registered new interface driver ums-karma
> [ 1.190330] usbcore: registered new interface driver ums-onetouch
> [ 1.190336] usbcore: registered new interface driver ums-realtek
> [ 1.190340] usbcore: registered new interface driver ums-sddr09
> [ 1.190345] usbcore: registered new interface driver ums-sddr55
> [ 1.190349] usbcore: registered new interface driver ums-usbat
> [ 1.190370] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64
> irq 1
> [ 1.190371] i8042: PNP: PS/2 appears to have AUX port disabled, if
> this is incorrect please boot with i8042.nopnp
> [ 1.191073] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.191119] mousedev: PS/2 mouse device common for all mice
> [ 1.191199] rtc_cmos rtc_cmos: RTC can wake from S4
> [ 1.191590] rtc_cmos rtc_cmos: registered as rtc0
> [ 1.191672] rtc_cmos rtc_cmos: setting system clock to
> 2023-03-09T14:33:46 UTC (1678372426)
> [ 1.191682] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes
> nvram, hpet irqs
> [ 1.191743] device-mapper: uevent: version 1.0.3
> [ 1.191768] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01)
> initialised: dm-devel at redhat.com
> [ 1.191781] platform eisa.0: Probing EISA bus 0
> [ 1.191782] platform eisa.0: EISA: Cannot allocate resource for
> mainboard
> [ 1.191783] platform eisa.0: Cannot allocate resource for EISA slot 1
> [ 1.191784] platform eisa.0: Cannot allocate resource for EISA slot 2
> [ 1.191785] platform eisa.0: Cannot allocate resource for EISA slot 3
> [ 1.191786] platform eisa.0: Cannot allocate resource for EISA slot 4
> [ 1.191787] platform eisa.0: Cannot allocate resource for EISA slot 5
> [ 1.191787] platform eisa.0: Cannot allocate resource for EISA slot 6
> [ 1.191788] platform eisa.0: Cannot allocate resource for EISA slot 7
> [ 1.191789] platform eisa.0: Cannot allocate resource for EISA slot 8
> [ 1.191790] platform eisa.0: EISA: Detected 0 cards
> [ 1.191792] intel_pstate: Intel P-state driver initializing
> [ 1.191847] intel_pstate: HWP enabled
> [ 1.191856] sdhci: Secure Digital Host Controller Interface driver
> [ 1.191857] sdhci: Copyright(c) Pierre Ossman
> [ 1.191878] wbsd: Winbond W83L51xD SD/MMC card interface driver
> [ 1.191878] wbsd: Copyright(c) Pierre Ossman
> [ 1.191895] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
> [ 1.191961] usbcore: registered new interface driver vub300
> [ 1.191967] usbcore: registered new interface driver ushc
> [ 1.191968] sdhci-pltfm: SDHCI platform and OF driver helper
> [ 1.191979] hid: raw HID events driver (C) Jiri Kosina
> [ 1.192097] usbcore: registered new interface driver usbhid
> [ 1.192098] usbhid: USB HID core driver
> [ 1.192120] ashmem: initialized
> [ 1.192203] intel_pmc_core INT33A1:00: initialized
> [ 1.192363] Initializing XFRM netlink socket
> [ 1.192378] NET: Registered protocol family 10
> [ 1.192903] Segment Routing with IPv6
> [ 1.192904] RPL Segment Routing with IPv6
> [ 1.192916] NET: Registered protocol family 17
> [ 1.192919] NET: Registered protocol family 15
> [ 1.192951] Key type dns_resolver registered
> [ 1.192953] mce: Unable to init MCE device (rc: -5)
> [ 1.193049] microcode: sig=0xa0653, pf=0x2, revision=0xf4
> [ 1.193071] microcode: Microcode Update Driver: v2.2.
> [ 1.193074] IPI shorthand broadcast: enabled
> [ 1.193077] SSE version of gcm_enc/dec engaged.
> [ 1.193227] sched_clock: Marking stable (1189592140,
> 3632121)->(1208940875, -15716614)
> [ 1.193260] registered taskstats version 1
> [ 1.193261] Loading compiled-in X.509 certificates
> [ 1.193268] Key type ._fscrypt registered
> [ 1.193268] Key type .fscrypt registered
> [ 1.193269] Key type fscrypt-provisioning registered
> [ 1.193346] Btrfs loaded, crc32c=crc32c-intel
> [ 1.193987] cfg80211: Loading compiled-in X.509 certificates for
> regulatory database
> [ 1.194176] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
> [ 1.194180] ALSA device list:
> [ 1.194181] No soundcards found.
> [ 1.194461] Freeing unused decrypted memory: 2036K
> [ 1.194618] Freeing unused kernel image (initmem) memory: 1272K
> [ 1.194637] platform regulatory.0: Direct firmware load for
> regulatory.db failed with error -2
> [ 1.194638] platform regulatory.0: Falling back to sysfs fallback
> for: regulatory.db
> [ 1.209452] Write protecting the kernel read-only data: 20480k
> [ 1.210085] Freeing unused kernel image (text/rodata gap) memory: 2044K
> [ 1.210103] Freeing unused kernel image (rodata/data gap) memory: 16K
> [ 1.210108] Run /init as init process
> [ 1.210109] with arguments:
> [ 1.210109] /init
> [ 1.210110] with environment:
> [ 1.210111] HOME=/
> [ 1.210111] TERM=linux
> [ 1.210112] apm=power-off
> [ 1.210113] lang=de
> [ 1.210113] BOOT_IMAGE=/boot/isolinux/linux64
> [ 1.210152] process '/bin/busybox' started with executable stack
> [ 1.211952] input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input3
> [ 1.258594] F2FS-fs (sda2): Magic Mismatch, valid(0xf2f52010) -
> read(0x1)
> [ 1.258601] F2FS-fs (sda2): Can't find valid F2FS filesystem in 1th
> superblock
> [ 1.258964] F2FS-fs (sda2): Magic Mismatch, valid(0xf2f52010) -
> read(0x0)
> [ 1.258967] F2FS-fs (sda2): Can't find valid F2FS filesystem in 2th
> superblock
> [ 1.284044] random: fast init done
> [ 1.455143] EXT4-fs (sda3): recovery complete
> [ 1.456171] EXT4-fs (sda3): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 1.479363] EXT4-fs (sda1): recovery complete
> [ 1.479368] EXT4-fs (sda1): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 1.479375] ext4 filesystem being mounted at /mnt-system supports
> timestamps until 2038 (0x7fffffff)
> [ 1.506682] F2FS-fs (sda): Magic Mismatch, valid(0xf2f52010) - read(0x0)
> [ 1.506688] F2FS-fs (sda): Can't find valid F2FS filesystem in 1th
> superblock
> [ 1.507072] F2FS-fs (sda): Magic Mismatch, valid(0xf2f52010) - read(0x0)
> [ 1.507075] F2FS-fs (sda): Can't find valid F2FS filesystem in 2th
> superblock
> [ 1.519503] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using
> xhci_hcd
> [ 1.540648] usb 2-2: New USB device found, idVendor=090c,
> idProduct=1000, bcdDevice=11.00
> [ 1.540655] usb 2-2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [ 1.540659] usb 2-2: Product: Flash Drive FIT
> [ 1.540663] usb 2-2: Manufacturer: Samsung
> [ 1.540666] usb 2-2: SerialNumber: 0374421050002224
> [ 1.576067] tsc: Refined TSC clocksource calibration: 3503.998 MHz
> [ 1.576080] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
> 0x328211acd6a, max_idle_ns: 440795259903 ns
> [ 1.576119] clocksource: Switched to clocksource tsc
> [ 1.669194] usb-storage 2-2:1.0: USB Mass Storage device detected
> [ 1.669346] usb-storage 2-2:1.0: Quirks match for vid 090c pid 1000: 400
> [ 1.669387] scsi host6: usb-storage 2-2:1.0
> [ 3.011708] scsi 6:0:0:0: Direct-Access Samsung Flash Drive FIT
> 1100 PQ: 0 ANSI: 6
> [ 3.012034] sd 6:0:0:0: Attached scsi generic sg1 type 0
> [ 3.012427] sd 6:0:0:0: [sdb] 125313283 512-byte logical blocks:
> (64.2 GB/59.8 GiB)
> [ 3.012567] sd 6:0:0:0: [sdb] Write Protect is off
> [ 3.012572] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
> [ 3.012705] sd 6:0:0:0: [sdb] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 3.043854] sdb: sdb1
> [ 3.044777] sd 6:0:0:0: [sdb] Attached SCSI removable disk
> [ 3.532757] F2FS-fs (sda2): Magic Mismatch, valid(0xf2f52010) -
> read(0x1)
> [ 3.532759] F2FS-fs (sda2): Can't find valid F2FS filesystem in 1th
> superblock
> [ 3.533111] F2FS-fs (sda2): Magic Mismatch, valid(0xf2f52010) -
> read(0x0)
> [ 3.533112] F2FS-fs (sda2): Can't find valid F2FS filesystem in 2th
> superblock
> [ 3.552475] EXT4-fs (sda3): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 3.606811] cloop: Open in read-write mode 0x4800001f requested,
> ignored.
> [ 3.607265] cloop: file KNOPPIX version 2, 7478 blocks of 262144
> bytes, header first.
> [ 3.609534] cloop: KNOPPIX: 7478 blocks, 262144 bytes/block, largest
> block is 262190 bytes.
> [ 3.618363] ISO 9660 Extensions: RRIP_1991A
> [ 3.727655] random: crng init done
> [ 3.792547] cloop: Open in read-write mode 0x4800001f requested,
> ignored.
> [ 3.792939] cloop: file KNOPPIX1 version 2, 39425 blocks of 262144
> bytes, header first.
> [ 3.798441] cloop: KNOPPIX1: 39425 blocks, 262144 bytes/block,
> largest block is 262190 bytes.
> [ 3.805601] ISO 9660 Extensions: RRIP_1991A
> [ 4.760765] cfg80211: failed to load regulatory.db
> [ 4.843898] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
> [ 4.845219] i2c i2c-0: 1/4 memory slots populated (from DMI)
> [ 4.845876] i2c i2c-0: Successfully instantiated SPD at 0x50
> [ 4.865426] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM,
> read-only
> [ 4.887045] snd_hda_intel 0000:00:1f.3: number of I/O streams is 16,
> forcing separate stream tags
> [ 4.905255] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have
> ASPM control
> [ 4.909580] input: HDA ATI HDMI HDMI/DP,pcm=3 as
> /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input4
> [ 4.931963] libphy: r8169: probed
> [ 4.932123] r8169 0000:02:00.0 eth0: RTL8125B, d8:bb:c1:d6:6f:0a, XID
> 641, IRQ 127
> [ 4.932124] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194
> bytes, tx checksumming: ko]
> [ 4.963764] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC897:
> line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
> [ 4.963766] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0
> (0x0/0x0/0x0/0x0/0x0)
> [ 4.963767] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
> (0x1b/0x0/0x0/0x0/0x0)
> [ 4.963768] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
> [ 4.963769] snd_hda_codec_realtek hdaudioC0D0: inputs:
> [ 4.963773] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
> [ 4.963775] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
> [ 4.963776] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
> [ 4.985795] input: HDA Intel Front Mic as
> /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
> [ 4.985841] input: HDA Intel Rear Mic as
> /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
> [ 4.985867] input: HDA Intel Line as
> /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
> [ 4.985893] input: HDA Intel Line Out as
> /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
> [ 4.985923] input: HDA Intel Front Headphone as
> /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
> [ 5.843259] [drm] radeon kernel modesetting enabled.
> [ 5.843306] radeon 0000:01:00.0: vgaarb: deactivate vga console
> [ 5.845448] Console: switching to colour dummy device 80x25
> [ 5.845632] [drm] initializing kernel modesetting (RV710
> 0x1002:0x954F 0x1462:0x1615 0x00).
> [ 5.845673] ATOM BIOS: RV710
> [ 5.845696] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 -
> 0x000000001FFFFFFF (512M used)
> [ 5.845698] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 -
> 0x000000005FFFFFFF
> [ 5.845700] [drm] Detected VRAM RAM=512M, BAR=256M
> [ 5.845700] [drm] RAM width 64bits DDR
> [ 5.845765] [TTM] Zone kernel: Available graphics memory: 4025202 KiB
> [ 5.845766] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
> [ 5.845766] [TTM] Initializing pool allocator
> [ 5.845769] [TTM] Initializing DMA pool allocator
> [ 5.845780] [drm] radeon: 512M of VRAM memory ready
> [ 5.845781] [drm] radeon: 1024M of GTT memory ready.
> [ 5.845788] [drm] Loading RV710 Microcode
> [ 5.854488] [drm] Internal thermal controller with fan control
> [ 5.856504] [drm] radeon: dpm initialized
> [ 5.856643] [drm] GART: num cpu pages 262144, num gpu pages 262144
> [ 5.857015] [drm] enabling PCIE gen 2 link speeds, disable with
> radeon.pcie_gen2=0
> [ 5.862655] [drm] PCIE GART of 1024M enabled (table at
> 0x000000000014C000).
> [ 5.862690] radeon 0000:01:00.0: WB enabled
> [ 5.862691] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr
> 0x0000000020000c00
> [ 5.862692] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr
> 0x0000000020000c0c
> [ 5.862875] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr
> 0x000000000005c598
> [ 5.862944] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
> [ 5.862971] radeon 0000:01:00.0: radeon: using MSI.
> [ 5.862986] [drm] radeon: irq initialized.
> [ 5.909293] [drm] ring test on 0 succeeded in 1 usecs
> [ 5.909298] [drm] ring test on 3 succeeded in 2 usecs
> [ 6.085130] [drm] ring test on 5 succeeded in 1 usecs
> [ 6.085133] [drm] UVD initialized successfully.
> [ 6.085186] [drm] ib test on ring 0 succeeded in 0 usecs
> [ 6.085199] [drm] ib test on ring 3 succeeded in 0 usecs
> [ 6.746077] [drm] ib test on ring 5 succeeded
> [ 6.748751] [drm] Radeon Display Connectors
> [ 6.748755] [drm] Connector 0:
> [ 6.748757] [drm] VGA-1
> [ 6.748762] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48
> 0x7e4c 0x7e4c
> [ 6.748764] [drm] Encoders:
> [ 6.748766] [drm] CRT2: INTERNAL_KLDSCP_DAC2
> [ 6.748768] [drm] Connector 1:
> [ 6.748770] [drm] HDMI-A-1
> [ 6.748772] [drm] HPD1
> [ 6.748777] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58
> 0x7e5c 0x7e5c
> [ 6.748778] [drm] Encoders:
> [ 6.748781] [drm] DFP1: INTERNAL_UNIPHY
> [ 6.748783] [drm] Connector 2:
> [ 6.748785] [drm] DVI-I-1
> [ 6.748787] [drm] HPD4
> [ 6.748790] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18
> 0x7f1c 0x7f1c
> [ 6.748792] [drm] Encoders:
> [ 6.748795] [drm] CRT1: INTERNAL_KLDSCP_DAC1
> [ 6.748797] [drm] DFP2: INTERNAL_UNIPHY2
> [ 6.804098] [drm] fb mappable at 0x8034D000
> [ 6.804099] [drm] vram apper at 0x80000000
> [ 6.804100] [drm] size 7680000
> [ 6.804100] [drm] fb depth is 24
> [ 6.804101] [drm] pitch is 6400
> [ 6.804191] fbcon: radeondrmfb (fb0) is primary device
> [ 6.822958] Console: switching to colour frame buffer device 200x75
> [ 6.827636] radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer
> device
> [ 6.846596] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0
> on minor 0
> [ 8.581062] acpi PNP0C14:02: duplicate WMI GUID
> 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
> [ 8.581118] acpi PNP0C14:03: duplicate WMI GUID
> 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
> [ 8.744517] IPMI message handler: version 39.2
> [ 8.759980] ipmi device interface
> [ 8.926867] zram0: detected capacity change from 0 to 4294967296
> [ 9.026178] Adding 4194300k swap on /dev/zram0. Priority:0 extents:1
> across:4194300k SS
> [ 9.110862] elogind-daemon[3009]: New seat seat0.
> [ 9.129621] elogind-daemon[3009]: Watching system buttons on
> /dev/input/event2 (Power Button)
> [ 9.129706] elogind-daemon[3009]: Watching system buttons on
> /dev/input/event1 (Power Button)
> [ 9.129786] elogind-daemon[3009]: Watching system buttons on
> /dev/input/event0 (Sleep Button)
> [ 9.204489] elogind-daemon[3009]: Watching system buttons on
> /dev/input/event3 (AT Translated Set 2 keyboard)
> [ 9.316926] intel_rapl_common: Found RAPL domain package
> [ 9.316928] intel_rapl_common: Found RAPL domain core
> [ 9.316929] intel_rapl_common: Found RAPL domain dram
> [ 9.433357] RTL8226B_RTL8221B 2.5Gbps PHY r8169-200:00: attached PHY
> driver [RTL8226B_RTL8221B 2.5Gbps PHY] (mii_bus:phy_addr=r8169-200:00,
> irq=IGNORE)
> [ 9.625435] r8169 0000:02:00.0 eth0: Link is Down
> [ 9.649691] snd_hda_intel 0000:00:1f.3: IRQ timing workaround is
> activated for card #0. Suggest a bigger bdl_pos_adj.
> [ 12.614249] r8169 0000:02:00.0 eth0: Link is Up - 1Gbps/Full - flow
> control rx/tx
> [ 12.614256] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 147.584370] r8169 0000:02:00.0 eth0: Link is Down
> [ 162.526029] usb 1-8: new full-speed USB device number 2 using xhci_hcd
> [ 162.669599] usb 1-8: New USB device found, idVendor=046d,
> idProduct=c066, bcdDevice=58.02
> [ 162.669607] usb 1-8: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [ 162.669611] usb 1-8: Product: G9x Laser Mouse
> [ 162.669614] usb 1-8: Manufacturer: Logitech
> [ 162.669618] usb 1-8: SerialNumber: DFDD093E290018
> [ 162.676357] input: Logitech G9x Laser Mouse as
> /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046D:C066.0001/input/input10
> [ 162.676631] hid-generic 0003:046D:C066.0001: input,hidraw0: USB HID
> v1.11 Mouse [Logitech G9x Laser Mouse] on usb-0000:00:14.0-8/input0
> [ 162.679682] input: Logitech G9x Laser Mouse Keyboard as
> /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046D:C066.0002/input/input11
> [ 162.736262] input: Logitech G9x Laser Mouse Consumer Control as
> /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046D:C066.0002/input/input12
> [ 162.736483] hid-generic 0003:046D:C066.0002: input,hiddev96,hidraw1:
> USB HID v1.11 Keyboard [Logitech G9x Laser Mouse] on
> usb-0000:00:14.0-8/input1
> [ 162.768769] elogind-daemon[3009]: Watching system buttons on
> /dev/input/event12 (Logitech G9x Laser Mouse Consumer Control)
> [ 162.769557] elogind-daemon[3009]: Watching system buttons on
> /dev/input/event11 (Logitech G9x Laser Mouse Keyboard)
> [ 164.467676] r8169 0000:02:00.0 eth0: Link is Up - 1Gbps/Full - flow
> control rx/tx
> knoppix at Microknoppix:~$
>
>
>
--
Diese E-Mail wurde von AVG-Antivirussoftware auf Viren geprüft.
www.avg.com
Mehr Informationen über die Mailingliste Eisfair