[Eisfair] [e64] nach update kommt eisfair nicht mehr hoch
Fabian Törner
fabian at toerners.eisfair.net
Mi Mär 15 13:20:33 CET 2023
Hallo nochmal,
wahrscheinlich ist es so, dass das nur bei neu installierten System ist
?! oder frisch aufgesetzten?
Bei meinen anderen Maschinen oder auch aus den VM's habe ich das
beschriebene Problem unten nicht... just fyi
Viele Grüße
Fabian
Am 15.03.2023 um 13:08 schrieb Fabian Törner:
> Hallo zusammen,
>
> Am 15.03.2023 um 12:45 schrieb Fabian Törner:
>> Hallo zusammen,
>>
>> auf der neuen Kiste habe ich das Problem (egal ob mit efi s. anderen
>> Eintrag weiter vorne, oder mit CMS) das der Rechner nach dem Update
>> nicht mehr hoch kommt. Ich vermute es hat was mit udev zu tun.
>> Auf dem System ist nur ein Festplatte gemounted, und während des
>> Starts wird:
>> [DEPEND] Dependency failed for /mnt.
>> [DEPEND] Dependency for Local File Systems.
>>
>> angezeigt
>> Dann kommen ein paar weitere Einträge mit [ OK ]
>> [ OK ] Mounted /boot
>> [ OK ] Reached target Sound Card.
>> [ **** ] A start job is running for /dev/dis...a208-58a791ede211
>>
>> dann lande im ermergency mode:
>>
>> You are in ermergency mode. After logging in, type "journalctl -xb" to
>> view system logs, "systemctl reboot" to reboot, "systemctl default" or
>> "exit" to boot into default mode.
>> Give root password for maintenance
>>
>> Root passwort wird nicht akzeptiert also kann ich nur CTRL-D drücken
>> und es wird versucht das default target zu starten. Wo er dann aber
>> hängen bleibt.
>>
>> Mhhh - komisch alles - was kann ich tun?
>
> folgend habe ich jetzt noch mal (nach Neuinstallation auf dem
> Testrechner) folgende Ausgangslage:
>
> eis # eisman install mdadm
>
> The following packages will be installed:
>
> version status name source
> ---------------------------------------------------------------------
> 3.2.0 stable system-group-kvm https://www.pack-eis.de
> 3.2.0 stable system-group-hardware https://www.pack-eis.de
> 3.2.3 stable systemd-default-settings https://www.pack-eis.de
> 3.2.0 stable liblz4-1 https://www.pack-eis.de
> 3.2.0 stable libgpg-error0 https://www.pack-eis.de
> 3.2.1 stable libgcrypt20 https://www.pack-eis.de
> 3.2.3 stable libsystemd0 https://www.pack-eis.de
> 3.2.2 stable libexpat1 https://www.pack-eis.de
> 3.2.4 stable dbus-1-common https://www.pack-eis.de
> 3.2.4 stable libdbus-1-3 https://www.pack-eis.de
> 3.2.4 stable dbus-1-daemon https://www.pack-eis.de
> 3.2.4 stable dbus-1-tools https://www.pack-eis.de
> 3.2.6 stable dbus-1 https://www.pack-eis.de
> 3.2.0 stable libseccomp2 https://www.pack-eis.de
> 3.2.1 stable libffi8 https://www.pack-eis.de
> 3.2.0 stable libp11-kit0 https://www.pack-eis.de
> 3.2.0 stable libnss_usrfiles2 https://www.pack-eis.de
> 3.2.0 stable libip4tc2 https://www.pack-eis.de
> 3.2.8 stable eisfair-base https://www.pack-eis.de
> 3.2.3 stable systemd https://www.pack-eis.de
> 3.2.3 stable systemd-sysvcompat https://www.pack-eis.de
> 3.2.0 stable libjson-c5 https://www.pack-eis.de
> 3.2.0 stable libdevmapper1_03 https://www.pack-eis.de
> 3.2.0 stable libargon2-1 https://www.pack-eis.de
> 3.2.0 stable libcryptsetup12 https://www.pack-eis.de
> 3.2.3 stable udev https://www.pack-eis.de
> 3.2.0 stable eisfair-service https://www.pack-eis.de
> 3.2.2 stable environment https://www.pack-eis.de
> 3.2.0 stable locales https://www.pack-eis.de
> 3.2.3 stable sysvinit-tools https://www.pack-eis.de
> 3.2.3 stable mdadm https://www.pack-eis.de
>
> 31 package(s) using approx. 32 MB of disk space.
>
> Continue (y/n) [yes]? y
> Downloading required packages ...
> => [####################] system-group-kvm (3.2.0)...
>
> [ OK ]
> => [####################] system-group-hardware (3.2.0)...
>
> [ OK ]
> => [####################] systemd-default-settings (3.2.3)...
>
> [ OK ]
> => [####################] liblz4-1 (3.2.0)...
>
> [ OK ]
> => [####################] libgpg-error0 (3.2.0)...
>
> [ OK ]
> => [####################] libgcrypt20 (3.2.1)...
>
> [ OK ]
> => [####################] libsystemd0 (3.2.3)...
>
> [ OK ]
> => [####################] libexpat1 (3.2.2)...
>
> [ OK ]
> => [####################] dbus-1-common (3.2.4)...
>
> [ OK ]
> => [####################] libdbus-1-3 (3.2.4)...
>
> [ OK ]
> => [####################] dbus-1-daemon (3.2.4)...
>
> [ OK ]
> => [####################] dbus-1-tools (3.2.4)...
>
> [ OK ]
> => [####################] dbus-1 (3.2.6)...
>
> [ OK ]
> => [####################] libseccomp2 (3.2.0)...
>
> [ OK ]
> => [####################] libffi8 (3.2.1)...
>
> [ OK ]
> => [####################] libp11-kit0 (3.2.0)...
>
> [ OK ]
> => [####################] libnss_usrfiles2 (3.2.0)...
>
> [ OK ]
> => [####################] libip4tc2 (3.2.0)...
>
> [ OK ]
> => [####################] eisfair-base (3.2.8)...
>
> [ OK ]
> => [####################] systemd (3.2.3)...
>
> [ OK ]
> => [####################] systemd-sysvcompat (3.2.3)...
>
> [ OK ]
> => [####################] libjson-c5 (3.2.0)...
>
> [ OK ]
> => [####################] libdevmapper1_03 (3.2.0)...
>
> [ OK ]
> => [####################] libargon2-1 (3.2.0)...
>
> [ OK ]
> => [####################] libcryptsetup12 (3.2.0)...
>
> [ OK ]
> => [####################] udev (3.2.3)...
>
> [ OK ]
> => [####################] eisfair-service (3.2.0)...
>
> [ OK ]
> => [####################] environment (3.2.2)...
>
> [ OK ]
> => [####################] locales (3.2.0)...
>
> [ OK ]
> => [####################] sysvinit-tools (3.2.3)...
>
> [ OK ]
> => [####################] mdadm (3.2.3)...
>
> [ OK ]
> Done!
> Installation of: system-group-kvm (3.2.0) ...
> Successfully installed: system-group-kvm (3.2.0)!
> Installation of: system-group-hardware (3.2.0) ...
> Successfully installed: system-group-hardware (3.2.0)!
> Installation of: systemd-default-settings (3.2.3) ...
> Successfully installed: systemd-default-settings (3.2.3)!
> Installation of: liblz4-1 (3.2.0) ...
> Successfully installed: liblz4-1 (3.2.0)!
> Installation of: libgpg-error0 (3.2.0) ...
> Successfully installed: libgpg-error0 (3.2.0)!
> Installation of: libgcrypt20 (3.2.1) ...
> Successfully installed: libgcrypt20 (3.2.1)!
> Installation of: libsystemd0 (3.2.3) ...
> Successfully installed: libsystemd0 (3.2.3)!
> Installation of: libexpat1 (3.2.2) ...
> Successfully installed: libexpat1 (3.2.2)!
> Installation of: dbus-1-common (3.2.4) ...
> Successfully installed: dbus-1-common (3.2.4)!
> Installation of: libdbus-1-3 (3.2.4) ...
> Successfully installed: libdbus-1-3 (3.2.4)!
> Installation of: dbus-1-daemon (3.2.4) ...
> Successfully installed: dbus-1-daemon (3.2.4)!
> Installation of: dbus-1-tools (3.2.4) ...
> Successfully installed: dbus-1-tools (3.2.4)!
> Installation of: dbus-1 (3.2.6) ...
> * Starting the D-Bus Messagebus Daemon...
>
> [ OK ]
> Successfully installed: dbus-1 (3.2.6)!
> Installation of: libseccomp2 (3.2.0) ...
> Successfully installed: libseccomp2 (3.2.0)!
> Installation of: libffi8 (3.2.1) ...
> Successfully installed: libffi8 (3.2.1)!
> Installation of: libp11-kit0 (3.2.0) ...
> Successfully installed: libp11-kit0 (3.2.0)!
> Installation of: libnss_usrfiles2 (3.2.0) ...
> Successfully installed: libnss_usrfiles2 (3.2.0)!
> Installation of: libip4tc2 (3.2.0) ...
> Successfully installed: libip4tc2 (3.2.0)!
> Installation of: eisfair-base (3.2.8) ...
>
> Control system services
>
> usage:
> service [OPTIONS] COMMAND PACKAGE [PACKAGE]*
>
> options:
> --msg=<msg> message to be displayed
> --help show this help screen
>
> possible values for COMMAND:
> is-service check whether a package name denotes a service
> is-enabled check whether a service is enabled
> enable enable a service for autostart
> disable disable a service for autostart
> start manually start a service
> stop manually stop a service
> restart manually stop and restart a service
> try-restart restart service only if it is already running
> status show status of a service
> reload reload configuration files
>
> Control system services
>
> usage:
> service [OPTIONS] COMMAND PACKAGE [PACKAGE]*
>
> options:
> --msg=<msg> message to be displayed
> --help show this help screen
>
> possible values for COMMAND:
> is-service check whether a package name denotes a service
> is-enabled check whether a service is enabled
> enable enable a service for autostart
> disable disable a service for autostart
> start manually start a service
> stop manually stop a service
> restart manually stop and restart a service
> try-restart restart service only if it is already running
> status show status of a service
> reload reload configuration files
>
> Control system services
>
> usage:
> service [OPTIONS] COMMAND PACKAGE [PACKAGE]*
>
> options:
> --msg=<msg> message to be displayed
> --help show this help screen
>
> possible values for COMMAND:
> is-service check whether a package name denotes a service
> is-enabled check whether a service is enabled
> enable enable a service for autostart
> disable disable a service for autostart
> start manually start a service
> stop manually stop a service
> restart manually stop and restart a service
> try-restart restart service only if it is already running
> status show status of a service
> reload reload configuration files
>
> Control system services
>
> usage:
> service [OPTIONS] COMMAND PACKAGE [PACKAGE]*
>
> options:
> --msg=<msg> message to be displayed
> --help show this help screen
>
> possible values for COMMAND:
> is-service check whether a package name denotes a service
> is-enabled check whether a service is enabled
> enable enable a service for autostart
> disable disable a service for autostart
> start manually start a service
> stop manually stop a service
> restart manually stop and restart a service
> try-restart restart service only if it is already running
> status show status of a service
> reload reload configuration files
> * Setting up resolv.conf ...
>
> [ OK ]
> Successfully installed: eisfair-base (3.2.8)!
> Installation of: systemd (3.2.3) ...
> Creating group 'systemd-journal' with GID 491.
> Creating group 'systemd-timesync' with GID 490.
> Creating user 'systemd-timesync' (systemd Time Synchronization) with UID
> 490 and GID 490.
> Initializing machine ID from D-Bus machine ID.
> Created symlink /etc/systemd/system/default.target →
> /usr/lib/systemd/system/multi-user.target.
> Created symlink /etc/systemd/system/tmp.mount → /dev/null.
> Created symlink
> /etc/systemd/system/getty.target.wants/getty at tty1.service →
> /usr/lib/systemd/system/getty at .service.
> Created symlink
> /etc/systemd/system/dbus-org.freedesktop.timesync1.service →
> /usr/lib/systemd/system/systemd-timesyncd.service.
> Created symlink
> /etc/systemd/system/sysinit.target.wants/systemd-timesyncd.service →
> /usr/lib/systemd/system/systemd-timesyncd.service.
> Successfully installed: systemd (3.2.3)!
> Installation of: systemd-sysvcompat (3.2.3) ...
> Successfully installed: systemd-sysvcompat (3.2.3)!
> Installation of: libjson-c5 (3.2.0) ...
> Successfully installed: libjson-c5 (3.2.0)!
> Installation of: libdevmapper1_03 (3.2.0) ...
> Successfully installed: libdevmapper1_03 (3.2.0)!
> Installation of: libargon2-1 (3.2.0) ...
> Successfully installed: libargon2-1 (3.2.0)!
> Installation of: libcryptsetup12 (3.2.0) ...
> Successfully installed: libcryptsetup12 (3.2.0)!
> Installation of: udev (3.2.3) ...
>
>
> Info:
> Core libraries or services have been updated.
> Reboot is required to ensure that your system benefits from these
> updates.
>
>
> Successfully installed: udev (3.2.3)!
> Installation of: eisfair-service (3.2.0) ...
>
>
> Info:
> This package requires a running systemd process.
> Please reboot the system and restart the installation.
>
>
> error: installation of "eisfair-service" aborted by /tmp/preinstall.sh!
> Failed to install: eisfair-service (3.2.0)!
> error: installation aborted!
> eis #
>
> Wenn ich nun neustarte kommt die Kiste wieder nicht hoch - daher lass
> ich es lieber um evtl. bei der Fehlersuche zu helfen :)
>
> Viele Grüße
> Fabian
>
>
--
Diese E-Mail wurde von AVG-Antivirussoftware auf Viren geprüft.
www.avg.com
Mehr Informationen über die Mailingliste Eisfair