[Eisfair] firmware dvb-fe-cx24116.fw

Helmut Pohl helmut_pohl at arcor.de
Mi Mai 7 12:27:19 CEST 2025 

Hallo Holger

Am 07.05.2025 um 11:52 schrieb Holger Bruenjes:
> Hallo Helmut
> 
> was ist das Ergebnis von
> 
> v4l2-ctl --all


eis64-home # v4l2-ctl --all
Driver Info:
         Driver name      : cx8800
         Card type        : Hauppauge WinTV-HVR4000(Lite) D
         Bus info         : PCI:0000:05:02.0
         Driver version   : 6.6.88
         Capabilities     : 0x85210011
                 Video Capture
                 VBI Capture
                 Tuner
                 Read/Write
                 Streaming
                 Extended Pix Format
                 Device Capabilities
         Device Caps      : 0x05210001
                 Video Capture
                 Tuner
                 Read/Write
                 Streaming
                 Extended Pix Format
Priority: 2
Frequency for tuner 0: 0 (0.000000 MHz)
Tuner 0:
         Name                 : Television
         Type                 : Analog TV
         Capabilities         : 62.5 kHz stereo lang1 lang2 freq-bands
         Frequency range      : 0.000 MHz - 268435455.938 MHz
         Signal strength/AFC  : 0%/0
         Current audio mode   : mono
         Available subchannels: mono
Video input : 0 (DVB: ok)
Video Standard = 0x00001000
         NTSC-M
Format Video Capture:
         Width/Height      : 320/240
         Pixel Format      : 'BGR3' (24-bit BGR 8-8-8)
         Field             : Interlaced
         Bytes per Line    : 960
         Size Image        : 230400
         Colorspace        : SMPTE 170M
         Transfer Function : Default (maps to Rec. 709)
         YCbCr/HSV Encoding: Default (maps to ITU-R 601)
         Quantization      : Default (maps to Full Range)
         Flags             :
Streaming Parameters Video Capture:
         Frames per second: 29.970 (30000/1001)
         Read buffers     : 2

User Controls

                      brightness 0x00980900 (int)    : min=0 max=255 
step=1 default=127 value=127 flags=slider
                        contrast 0x00980901 (int)    : min=0 max=255 
step=1 default=63 value=63 flags=slider
                      saturation 0x00980902 (int)    : min=0 max=255 
step=1 default=127 value=127 flags=slider
                             hue 0x00980903 (int)    : min=0 max=255 
step=1 default=127 value=127 flags=slider
                          volume 0x00980905 (int)    : min=0 max=63 
step=1 default=63 value=63 flags=slider
                         balance 0x00980906 (int)    : min=0 max=127 
step=1 default=64 value=64 flags=slider
                            mute 0x00980909 (bool)   : default=1 value=1
                       sharpness 0x0098091b (int)    : min=0 max=4 
step=1 default=0 value=0 flags=slider
                      chroma_agc 0x0098091d (bool)   : default=1 value=1
                    color_killer 0x0098091e (bool)   : default=1 value=1
                band_stop_filter 0x00980921 (int)    : min=0 max=1 
step=1 default=0 value=0
eis64-home #


> 
> 
> die modprobe option hinzufuegen
> 
> /etc/modprobe.d/cx88xx.conf
> 
> 
> options cx88xx card=69
> 
> Holger
> 

Habe ich gemacht, allerdings keine Auswirkungen.

eis64-home # grep modprobe boot.log.2
May 07 12:06:52 eis64-home kernel: modprobe (68) used greatest stack 
depth: 13248 bytes left
May 07 12:06:52 eis64-home kernel: modprobe (75) used greatest stack 
depth: 12896 bytes left
May 07 12:06:53 eis64-home systemd[1]: Created slice Slice /system/modprobe.
May 07 12:06:53 eis64-home systemd[1]: modprobe at configfs.service: 
Deactivated successfully.
May 07 12:07:43 eis64-home systemd[1]: modprobe at configfs.service: 
Deactivated successfully.
May 07 12:07:43 eis64-home systemd[1]: modprobe at dm_mod.service: 
Deactivated successfully.
May 07 12:07:43 eis64-home systemd[1]: modprobe at loop.service: 
Deactivated successfully.
May 07 12:07:43 eis64-home systemd[1]: modprobe at fuse.service: 
Deactivated successfully.
May 07 12:07:44 eis64-home systemd[1]: modprobe at drm.service: Deactivated 
successfully.
May 07 12:07:46 eis64-home systemd[1]: modprobe at configfs.service: 
Deactivated successfully.
May 07 12:07:53 eis64-home systemd[1]: modprobe at loop.service: 
Deactivated successfully.
May 07 12:07:53 eis64-home systemd[1]: modprobe at dm_mod.service: 
Deactivated successfully.
May 07 12:07:53 eis64-home systemd[1]: modprobe at dm_mod.service: 
Deactivated successfully.
May 07 12:07:53 eis64-home systemd[1]: modprobe at loop.service: 
Deactivated successfully.
May 07 12:08:07 eis64-home (modprobe)[694]: lm_sensors.service: 
Referenced but unset environment variable evaluates to an empty string: 
BUS_MODULES
eis64-home # grep cx88 boot.log.2
May 07 12:07:58 eis64-home kernel: cx88xx: subsystem: 0070:6906, board: 
Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69,insmod option], 
frontend(s): 1
May 07 12:07:58 eis64-home kernel: cx88xx: hauppauge eeprom: model=69100
May 07 12:07:58 eis64-home kernel: rc rc0: cx88 IR (Hauppauge 
WinTV-HVR400 as /devices/pci0000:00/0000:00:1e.0/0000:05:02.1/rc/rc0
May 07 12:07:58 eis64-home kernel: rc rc0: lirc_dev: driver cx88xx 
registered at minor = 0, raw IR receiver, no transmitter
May 07 12:07:58 eis64-home kernel: input: cx88 IR (Hauppauge 
WinTV-HVR400 as /devices/pci0000:00/0000:00:1e.0/0000:05:02.1/rc/rc0/input6
May 07 12:07:58 eis64-home kernel: cx8802: cx2388x 8802 Driver Manager
May 07 12:07:58 eis64-home kernel: cx88_alsa: cx88[0]: alsa: CX88x/0: 
ALSA support for cx2388x boards
May 07 12:07:58 eis64-home kernel: cx8800: found at 0000:05:02.0, rev: 
5, irq: 18, latency: 64, mmio: 0xfa000000
May 07 12:07:58 eis64-home kernel: cx8802: found at 0000:05:02.2, rev: 
5, irq: 18, latency: 64, mmio: 0xfc000000
May 07 12:07:58 eis64-home kernel: cx8800: registered device video0 [v4l2]
May 07 12:07:58 eis64-home kernel: cx8800: registered device vbi0
May 07 12:07:58 eis64-home kernel: cx88_dvb: cx2388x dvb driver version 
1.0.0 loaded
May 07 12:07:58 eis64-home kernel: cx8802: registering cx8802 driver, 
type: dvb access: shared
May 07 12:07:58 eis64-home kernel: cx8802: subsystem: 0070:6906, board: 
Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69]
May 07 12:07:58 eis64-home kernel: cx88_dvb: cx2388x based DVB/ATSC card
May 07 12:07:58 eis64-home kernel: cx88_dvb: cx8802_alloc_frontends: 
allocating 1 frontend(s)
May 07 12:07:58 eis64-home kernel: cx88_dvb: dvb_register failed (err = -22)
May 07 12:07:58 eis64-home kernel: cx8802: cx8802 probe failed, err = -22
May 07 12:08:03 eis64-home systemd-logind[534]: Watching system buttons 
on /dev/input/event13 (cx88 IR (Hauppauge WinTV-HVR400)


> 
> Am 07.05.25 um 11:05 schrieb Helmut Pohl:
>> Hallo Holger
>>
>> dass Device wurde automatisch beim Booten erzeugt. Ich habe im Bootlog
>> den vermutlichen Fehler gefunden, der verhindert dass das Device
>> angelegt wird und die Firmware geladen wird.
>> Siehe auch meinen anderen Thread:
>>
>> [60.805486] cx88_dvb: dvb_register failed (err = -22)
>> [60.805521] cx8802: cx8802 probe failed, err = -22
> 
> 

Gruß,
Helmut

Mehr Informationen über die Mailingliste Eisfair