[Eisfair] eisfax und Fritz-Probleme
Stephan Manske
usenet-reply at stephan.manske-net.de
Mi Okt 21 22:08:56 CEST 2026
Und nochmal in die Runde, winke winke ...
Da ist noch ein anderes Problem, was mich seit geraumer Zeit plagt.
Mein Eisfax und meine Fritz-Karte will nicht mehr :-(
Eisfax will sich nicht updaten:
The following packages will be installed:
version status name source
---------------------------------------------------------------------
3.6.1 stable eisfax https://www.pack-eis.de
1 package(s) using approx. 1 MB of disk space.
Continue (y/n) [yes]?
Downloading required packages ...
Done!
Installation of: eisfax (3.6.1) ...
error: failed to extract archive!
Failed to install: eisfax (3.6.1)!
error: installation aborted!
Press ENTER to continue
und überhaupt wird meine Frist-ISDN-Karte nicht mehr so richtig gefunden.
Ich meine mich zu erinnern, früher waren da immer noch zur Fritzkarte
gehörende Kernel-Dateien oder so. Die finde ich nicht mehr.
Rein von der Hardware ist sie da:
Network: Card-1: Realtek RTL8169 PCI Gigabit Ethernet Controller
driver: r8169
IF: lan0 state: up speed: 1000 Mbps duplex: full mac:
c0:4a:00:03:06:05
Card-2: AVM Fritz!Card PCI v2.0 ISDN
IF: N/A state: N/A speed: N/A duplex: N/A mac: N/A
Card-3: Realtek RTL8111/8168/8211/8411 PCIE Gigabit Ethernet
Controller driver: r8169
IF: enxd050994620cd state: down mac: d0:50:99:46:20:cd
aber in der CAPI-Administration:
List installed controller(s)
Detecting ISDN-Devices ...
Found 0 controller
und
│/usr/sbin/service start capi.service
│
│ * Starting ISDN CAPI daemon ...
│
│ => OK
│/usr/sbin/service status capi.service
│
│* capi.service - ISDN CAPI daemon
│
│ Loaded: loaded (/usr/lib/systemd/system/capi.service; enabled;
preset: disabled)
│
│ Active: inactive (dead) since Wed 2026-10-21 22:03:38 CEST; 16s
ago
│
│ Duration: 42ms
│
│ Invocation: 46998f747a664ef582f19b7572fb728b
│
│ Process: 25400 ExecStart=/usr/lib/systemd/scripts/capi-init start
(code=exited, status=0/SUCCESS)
│
│ Main PID: 25400 (code=exited, status=0/SUCCESS)
│
│ CPU: 25ms
│
│
│
│Oct 21 22:03:38 eis systemd[1]: Started ISDN CAPI daemon.
│
│Oct 21 22:03:38 eis systemd[1]: capi.service: Deactivated successfully.
und Eisfax sagt:
List installed controller(s)
Detecting ISDN-Devices ...
Found 0 controller
und wenn ich ein Testfax senden will:
C4H-Version 01.03.10-eisfair-1 (32Bit).
Try to connect to fax number xxxx in TIFF mode on controller 1.
Connection dropped with reason 0x1009 (CAPI not installed).
Wat denn da los!? *heul*
Ciao, Stephan
Mehr Informationen über die Mailingliste Eisfair