[Eisfair_dev] SANE mit hpaio

[Stephan Manske]

Hi,

so, jetzt habe ich aktuell ein aktuelles cups und hplip auf meinem
eisfair liegen.

Jetzt kommen die eigentlichen sane-Probleme ;-)

gegeben ist das sane-Paket 1.1.7 sowie ein selbstinstalliertes hplip
in 3.12.10a


Zuersteinmal fällt mir auf, ich sehe mit sane-find-scanner erst
etwas, wenn ich vorher manuell eingebe

| modprobe scanner vendor=0x03f0 product=0x2d11


Dann kommt:

| root at eis (/root)# sane-find-scanner
| 
|   # sane-find-scanner will now attempt to detect your scanner. If the
|   # result is different from what you expected, first make sure your
|   # scanner is powered up and properly connected to your computer.
| 
|   # No SCSI scanners found. If you expected something different, make sure that
|   # you have loaded a kernel SCSI driver for your SCSI adapter.
|   # Also you need support for SCSI Generic (sg) in your operating system.
|   # If using Linux, try "modprobe sg".
| 
| found USB scanner (vendor=0x03f0, product=0x2d11) at /dev/usbscanner0


| root at eis (/etc/sane.d)# scanimage -L
| device `hpaio:/usb/OfficeJet_6100_Series?serial=MYxxx' is a Hewlett-Packard OfficeJet_6100_Series all-in-one
| device `net:eis.domain:hpaio:/usb/OfficeJet_6100_Series?serial=MYxxx' is a Hewlett-Packard OfficeJet_6100_Series all-in-one
| device `net:localhost:hpaio:/usb/OfficeJet_6100_Series?serial=MYxxx' is a Hewlett-Packard OfficeJet_6100_Series all-in-one

Soweit, so gut.


hpaio habe ich neben net auch manuell in /etc/sane.d/ eingetragen,
weil das Setup dieses Backend nicht kennt.

Ein hpaio.conf gibt es in diesem Verzeichnis nicht.




Im Setup-Menu:

Find scanner zeigt:

| Find scanner
| 
| found USB scanner (vendor=0x03f0, product=0x2d11) at /dev/usbscanner0
| 
| Press ENTER to continue


Test scanner:

| Test if SANE found the scanner
| 
| found USB scanner (vendor=0x03f0, product=0x2d11) at /dev/usbscanner0

aber dann geht es nicht weiter. Ich muß per ctrl-c abbrechen.



Scan image

| Scanner: is a Hewlett-Packard OfficeJet 6100 Series all-in-one
| on     : hpaio:/usb/OfficeJet_6100_Series?serial=MYxxx
| 
| Resolution:                                        yes dpi
| Mode:                                              yes
| Top-left x position:
| Top-left y position:
| Width:                                             210
| Height:                                            297
| Image type:                                        png
| Image name:              ImageScan-2012-10-30-00-59-18
| Image path:                                       /tmp
| 
| Scanning in progress ...


und dann irgendwann:

| scanimage: open of device hpaio:/usb/OfficeJet_6100_Series?serial=MYxxx failed: Invalid argument
| 
| ...failure
| Retry (y/n) [yes]?


messages:

| saned[5971]: saned (AF-indep+IPv6) from sane-backends 1.0.23 starting up
| saned[5971]: check_host: access by remote host: 192.168.10.1
| saned[5971]: init: access granted to root at 192.168.10.1
| saned[5972]: saned (AF-indep+IPv6) from sane-backends 1.0.23 starting up
| saned[5972]: check_host: access by remote host: 127.0.0.1
| saned[5972]: init: access granted to root at 127.0.0.1
| saned[5972]: saned exiting
| saned[5971]: saned exiting
| saned[8929]: saned (AF-indep+IPv6) from sane-backends 1.0.23 starting up
| saned[8929]: check_host: access by remote host: 192.168.10.1
| saned[8929]: init: access granted to root at 192.168.10.1
| saned[8930]: saned (AF-indep+IPv6) from sane-backends 1.0.23 starting up
| saned[8930]: check_host: access by remote host: 127.0.0.1
| saned[8930]: init: access granted to root at 127.0.0.1
| saned[8930]: saned exiting
| saned[8929]: saned exiting
| scanimage: io/hpmud/mlc.c 179: unable to read MlcReverseCmd header: No data available
| scanimage: io/hpmud/musb.c 1691: invalid MlcCredit from peripheral, trying miser
| scanimage: io/hpmud/mlc.c 179: unable to read MlcReverseCmd header: No data available
| scanimage: io/hpmud/musb.c 1696: invalid MlcCredit from peripheral
| scanimage: io/hpmud/hpmud.c 346: device_cleanup: device uri=hp:/usb/OfficeJet_6100_Series?serial=MYxxx
| scanimage: io/hpmud/hpmud.c 358: device_cleanup: close device dd=1...
| scanimage: io/hpmud/hpmud.c 360: device_cleanup: done closing device dd=1









Ciao, Stephan

-- 
E-Mail: stephan at manske-net.de - WWW: http://stephan.manske-net.de/     //
                                                          PGP 2.6.3i \X/
Flirten ist die Kunst, einer Frau in die Arme zu sinken, ohne ihr in die
Haende zu fallen.