[Eisfair_dev] lm-sensors auf Asus CUR-DLS

[Wolfgang Loefstedt]

Am 10.03.2017 um 21:42 schrieb Marcus Roeckrath:

> Nimm als Lese-Referenz für den Chips
> unter /usr/share/doc/lm_sensors/Chips_enhanced/as99127f.conf. Scheint
> besser zu Deinem Board zu passen.

Hallo Marcus,
so sieht die /etc/sensors3.conf jetzt aus:

------------------cut here---------------
# /etc/sensors3.conf
chip "as99127f-*"
set beep_enable 0
label in0 "VCore 1"
label in1 "VCore 2"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "-12V"
label in6 "-5V"
compute in3 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
compute in4 ((28/10)+1)*@  ,  @/((28/10)+1)
compute in5 -(240/60.4)*@ ,  -@/(240/60.4)
compute in6 -(90.9/60.4)*@ ,  -@/(90.9/60.4)
label temp1 "M/B Temp"
label temp2 "CPU1 Temp"
label temp3 "CPU2 Temp"
ignore fan3
------------------cut here---------------

ergibt folgenden output:
------------------cut here---------------
eisfair # sensors
as99127f-i2c-0-2d
Adapter: SMBus PIIX4 adapter at e800
VCore 1:      +1.74 V  (min =  +1.63 V, max =  +1.86 V)
VCore 2:      +1.73 V  (min =  +2.37 V, max =  +2.62 V)
+3.3V:        +3.33 V  (min =  +3.14 V, max =  +3.47 V)
+5V:          +5.03 V  (min =  +4.76 V, max =  +5.24 V)
+12V:        +12.22 V  (min = +10.82 V, max = +13.19 V)
-12V:         -2.29 V  (min =  -1.34 V, max =  -3.18 V)
-5V:          -1.16 V  (min =  -1.18 V, max =  -1.42 V)  ALARM
fan1:        4383 RPM  (min = 2657 RPM, div = 2)
fan2:        4530 RPM  (min =    0 RPM, div = 2)
M/B Temp:     +33.0°C  (high =  +8.0°C, hyst =  +0.0°C)
CPU1 Temp:    +36.5°C  (high = +67.0°C, hyst = +60.0°C)
CPU2 Temp:    +37.5°C  (high = +67.0°C, hyst = +60.0°C)
cpu0_vid:    +1.750 V
beep_enable: disabled
------------------cut here---------------

Das sieht ja schon ganz gut aus. Frage: Wo kommen die Limits her?
Und wie sind die compute-Zeilen zu verstehen?

Gruss, w