[Eisfair_dev] [e1] Abbruch bei Kernel-Update
Holger Behmann
holger.behmann at gmx.de
So Dez 13 18:24:18 CET 2020
Nachtrag:
mail # lspci -v
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
Subsystem: Red Hat, Inc. Qemu virtual machine
Flags: bus master, fast devsel, latency 0
00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
Subsystem: Red Hat, Inc. Qemu virtual machine
Flags: bus master, medium devsel, latency 0
00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE
[Natoma/Triton II] (prog-if 80 [ISA Compatibility mode-only controller,
supports bus mastering])
Subsystem: XenSource, Inc. 82371SB PIIX3 IDE [Natoma/Triton II]
Flags: bus master, medium devsel, latency 0
Memory at 000001f0 (32-bit, non-prefetchable) [virtual] [size=8]
Memory at 000003f0 (type 3, non-prefetchable) [virtual]
Memory at 00000170 (32-bit, non-prefetchable) [virtual] [size=8]
Memory at 00000370 (type 3, non-prefetchable) [virtual]
I/O ports at c220 [virtual] [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: ata_piix, pata_acpi, ata_generic
00:01.2 USB controller: Intel Corporation 82371SB PIIX3 USB
[Natoma/Triton II] (rev 01) (prog-if 00 [UHCI])
Subsystem: XenSource, Inc. 82371SB PIIX3 USB [Natoma/Triton II]
Flags: bus master, fast devsel, latency 0, IRQ 23
I/O ports at c200 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 01)
Subsystem: Red Hat, Inc. Qemu virtual machine
Flags: bus master, medium devsel, latency 0, IRQ 9
Kernel modules: i2c_piix4
00:02.0 VGA compatible controller: Cirrus Logic GD 5446 (prog-if 00 [VGA
controller])
Subsystem: XenSource, Inc. GD 5446
Flags: bus master, fast devsel, latency 0
Memory at f0000000 (32-bit, prefetchable) [size=32M]
Memory at f3000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled]
00:03.0 SCSI storage controller: XenSource, Inc. Xen Platform Device
(rev 01)
Subsystem: XenSource, Inc. Xen Platform Device
Flags: bus master, fast devsel, latency 0, IRQ 5
I/O ports at c000 [size=256]
Memory at f2000000 (32-bit, prefetchable) [size=16M]
00:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (rev 20)
Subsystem: XenSource, Inc. RTL-8100/8101L/8139 PCI Fast Ethernet
Adapter
Flags: bus master, fast devsel, latency 0, IRQ 32
I/O ports at c100 [size=256]
Memory at f3001000 (32-bit, non-prefetchable) [size=256]
Kernel driver in use: 8139cp
Kernel modules: 8139cp, 8139too
Am 13.12.2020 um 18:19 schrieb Holger Behmann:
> Hallo zusammen,
>
> unter XCP-ng 8.1 schlägt ein Kernel-Update mit folgender Fehlermeldung fehl:
> Cannot find /dev/disk/by-id.
> Do you have installed latest udev package and rebooted?
>
> Press ENTER to continue
> error: installation of "eiskernel-smp" aborted by /tmp/preinstall.sh!
> Failed to install: eiskernel-smp (5.2.0)!
> error: installation aborted!
>
>
> base 2.8.25
>
> mail # cat /etc/fstab
> UUID=a2a828da-d223-4e1a-84d1-9aa916b2f3e0 / ext3
> defaults,errors=remount-ro 0 1
> UUID=d1be4f77-be99-41fd-8172-7b49c39dc5a3 /boot ext3
> defaults,errors=remount-ro 0 1
> UUID=0cfc0b15-89e5-45e4-a05a-dafd2979b8da none swap sw 0 0
> UUID=1f0dcb09-b927-450a-be1e-311222de683b /var ext3
> defaults,errors=remount-ro 0 1
> UUID=08431f8b-4916-454a-86e7-e58035ae773a /home ext3
> defaults,errors=remount-ro 0 1
> proc /proc proc defaults 0 0
> /dev/fd0 /media/floppy auto defaults,user,noauto 0 0
> /dev/cdrom /media/cdrom iso9660 defaults,ro,user,noauto 0 0
> devpts /dev/pts devpts defaults,gid=5,mode=620 0 0
> /sys /sys sysfs defaults 0 0
> tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
> tmpfs /run tmpfs defaults 0 0
> devtmpfs /dev devtmpfs mode=0755,nosuid 0 0
>
> mail # lsblk
> NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
> hda 3:0 0 8G 0 disk
> |-hda1 3:1 0 53.9M 0 part /boot
> |-hda2 3:2 0 517.7M 0 part [SWAP]
> `-hda3 3:3 0 7.5G 0 part /
> hdb 3:64 0 12G 0 disk
> `-hdb1 3:65 0 12G 0 part /var
> hdc 22:0 0 30G 0 disk
> `-hdc1 22:1 0 30G 0 part /home
> hdd 22:64 1 4G 0 disk
>
> mail # cat /etc/lilo.conf
> lba32
> disk = /dev/hda
> bios = 0x80
> boot = /dev/hda
> read-only
> prompt
> timeout = 50
> vga = normal
> menu-scheme = wr:bw:wr:Yr
> image = /boot/kernel
> root = /dev/hda3
> label = eis
> initrd = /boot/initrd.gz
> append = "raid=noautodetect net.ifnames=0"
> image = /boot/old-kernel
> root = /dev/hda3
> label = oldeis
> initrd = /boot/old-initrd.gz
> append = "raid=noautodetect net.ifnames=0"
> image = /boot/kernel-3.16.56-SMP
> root = /dev/hda3
> label = 3.16.56-SMP
> initrd = /boot/initrd-3.16.56-SMP.gz
> append = "raid=noautodetect net.ifnames=0"
>
> mail # ls -la /dev/disk
> total 0
> drwxr-xr-x 4 root root 80 Dec 10 20:52 .
> drwxr-xr-x 10 root root 16020 Dec 13 17:55 ..
> drwxr-xr-x 2 root root 140 Dec 10 20:52 by-partuuid
> drwxr-xr-x 2 root root 140 Dec 10 20:52 by-uuid
>
> mail # ls -la /dev/disk/by-uuid/
> total 0
> drwxr-xr-x 2 root root 140 Dec 10 20:52 .
> drwxr-xr-x 4 root root 80 Dec 10 20:52 ..
> lrwxrwxrwx 1 root root 10 Dec 10 20:52
> 08431f8b-4916-454a-86e7-e58035ae773a -> ../../hdc1
> lrwxrwxrwx 1 root root 10 Dec 10 20:52
> 0cfc0b15-89e5-45e4-a05a-dafd2979b8da -> ../../hda2
> lrwxrwxrwx 1 root root 10 Dec 10 20:52
> 1f0dcb09-b927-450a-be1e-311222de683b -> ../../hdb1
> lrwxrwxrwx 1 root root 10 Dec 10 20:52
> a2a828da-d223-4e1a-84d1-9aa916b2f3e0 -> ../../hda3
> lrwxrwxrwx 1 root root 10 Dec 10 20:52
> d1be4f77-be99-41fd-8172-7b49c39dc5a3 -> ../../hda1
>
> Wer kann helfen?
>
> BTW: Ich kann keine Neuinstallation mit den aktuellen ISOs
> (eisfair-2.8.25-4.6.0-SMP-cd-image.iso oder
> eisfair-2.8.25-4.6.0-VIRT-x86_64-cd-image.iso) durchführen - es wird in
> beiden Fällen keine Platte gefunden!
>
Mehr Informationen über die Mailingliste Eisfair_dev