[Eisfair_dev] Eiskernel-64-virt 5.4.0 hänger bei compress backup.tar

Mi Jan 6 17:53:18 CET 2021

Hallo Thomas und Marcus,

war da nicht kürzlich mal was mit "Updates vom eisman müssen immer 
alleine durchgeführt werden"???

ich finde es nicht mehr - aber habs probiert: den eisman alleine 
ge-updatet (via setup) und dann einfach eisman upgrade...

nursegollum # eisman upgrade

The following packages will be installed:

version  status   name                   source
---------------------------------------------------------------------
3.0.4    stable   stress-ng              https://www.pack-eis.de
3.0.0    stable   smartmon               https://www.pack-eis.de
3.0.0    stable   libevent-2_1-7         https://www.pack-eis.de
1.4.6    stable   ntp                    https://www.pack-eis.de
3.0.1    stable   mc                     https://www.pack-eis.de
3.0.0    stable   libntfs-3g88           https://www.pack-eis.de
3.0.0    stable   libfuse2               https://www.pack-eis.de
3.0.0    stable   ntfs-3g                https://www.pack-eis.de
3.0.0    stable   kbd                    https://www.pack-eis.de
3.0.0    stable   locales                https://www.pack-eis.de
3.0.1    stable   hwdata                 https://www.pack-eis.de
5.4.0    stable   eiskernel-pae          https://www.pack-eis.de

12 package(s) using approx. 254 MB of disk space.

Continue (y/n) [yes]?
Downloading required packages ...
=> [####################] stress-ng (3.0.4)...                         [ 
  OK  ]
=> [####################] smartmon (3.0.0)...                          [ 
  OK  ]
=> [####################] libevent-2_1-7 (3.0.0)...                    [ 
  OK  ]
=> [####################] ntp (1.4.6)...                               [ 
  OK  ]
=> [####################] mc (3.0.1)...                                [ 
  OK  ]
=> [####################] libntfs-3g88 (3.0.0)...                      [ 
  OK  ]
=> [####################] libfuse2 (3.0.0)...                          [ 
  OK  ]
=> [####################] ntfs-3g (3.0.0)...                           [ 
  OK  ]
=> [####################] kbd (3.0.0)...                               [ 
  OK  ]
=> [####################] locales (3.0.0)...                           [ 
  OK  ]
=> [####################] hwdata (3.0.1)...                            [ 
  OK  ]
=> [####################] eiskernel-pae (5.4.0)...                     [ 
  OK  ]
Done!
Installation of: stress-ng (3.0.4) ...
Successfully installed: stress-ng (3.0.4)!
Installation of: smartmon (3.0.0) ...
smartd is not running.
smartd is not running.
smartd is not running.
If download of drives database should be verified install gnupg2 package.
/usr/share/smartmontools/drivedb.h updated from 
branches/RELEASE_7_2_DRIVEDB (NOT VERIFIED)
Successfully installed: smartmon (3.0.0)!
Installation of: libevent-2_1-7 (3.0.0) ...
Successfully installed: libevent-2_1-7 (3.0.0)!
Installation of: ntp (1.4.6) ...
updating shared library file (63283->82158) ...
renamed '/var/install/include/jedlib.ntp' -> '/var/install/include/jedlib'
  * Stopping NTP daemon ... 
[  OK  ]
  * Starting NTP daemon ... 
[  OK  ]
Successfully installed: ntp (1.4.6)!
Installation of: mc (3.0.1) ...
Successfully installed: mc (3.0.1)!
Installation of: libntfs-3g88 (3.0.0) ...
Successfully installed: libntfs-3g88 (3.0.0)!
Installation of: libfuse2 (3.0.0) ...
Successfully installed: libfuse2 (3.0.0)!
Installation of: ntfs-3g (3.0.0) ...
Successfully installed: ntfs-3g (3.0.0)!
Installation of: kbd (3.0.0) ...
Successfully installed: kbd (3.0.0)!
Installation of: locales (3.0.0) ...
  * Setting console mode to Unicode (UTF-8)... 
[  OK  ]
Successfully installed: locales (3.0.0)!
Installation of: hwdata (3.0.1) ...
Successfully installed: hwdata (3.0.1)!
Installation of: eiskernel-pae (5.4.0) ...
Saving your kernel configuration in /tmp/kernel-backup.tar:
  /boot
  /etc/lilo.conf
  /lib/modules/4.9.220-eisfair-1-PAE
  /lib/modules/4.9.245-eisfair-1-PAE
  /System.map-4.9.220-eisfair-1-PAE
  /System.map-4.9.245-eisfair-1-PAE
  /usr/src/linux-4.9.220-eisfair-1/dot-config-pae
  /usr/src/linux-4.9.245-eisfair-1/dot-config-pae
  /usr/src/linux-4.9.220-eisfair-1/Module.symvers-pae
  /usr/src/linux-4.9.245-eisfair-1/Module.symvers-pae
  /var/install/packages/eiskernel
  /var/install/packages/eiskernel-pae
Done.
Compressing /tmp/kernel-backup.tar to /tmp/kernel-backup.tar.gz ...
Moving /boot/kernel to /boot/old-kernel ...
Moving /boot/initrd.gz to /boot/old-initrd.gz ...
Creating initramfs ...
  Copying binfiles ...
  Copying sbinfiles ...
  Copying libraries ...
Done creating initramfs.
Running in physical environment, trying to add microcode updates ...
Adding Intel microcode updates to initramfs ...
Installing new initrd.gz to /boot/initrd.gz ...
Installing new kernel to /boot/kernel ...
Saving old /etc/lilo.conf to /etc/lilo.conf.OLD ...
Removing old files:
  /boot/kernel-4.9.220-PAE
  /boot/initrd-4.9.220-PAE.gz
  /System.map-4.9.220-eisfair-1-PAE
  /lib/modules/4.9.220-eisfair-1-PAE
  /usr/src/linux-4.9.220-eisfair-1/dot-config-pae
  /usr/src/linux-4.9.220-eisfair-1/Module.symvers-pae
  /usr/src/linux-4.9.220-eisfair-1
Done removing old files.
Running kernel 4.9.245-eisfair-1-PAE is not in fallback list ...
max-partitions is not set, dont trying to convert disk to 
/dev/disk/by-id/ ...
boot device /dev/sdb is already converted to /dev/disk/by-id/,
/dev/disk/by-id/usb-Lexar_USB_Flash_Drive_AAXFTMARIST8L656-0:0.
root device /dev/sdb2 is already converted to /dev/disk/by-uuid/,
"UUID=b304afd2-c653-45b3-bcbe-4f1fc9e15ca3".

Warning: 
/dev/disk/by-id/usb-Lexar_USB_Flash_Drive_AAXFTMARIST8L656-0:0:BIOS 
syntax is no longer supported: Treating as a device file.
Warning: LILO is compensating for a BIOS bug: (drive 0x80) heads > 255
Warning: Maximum number of heads = 256 (as specified)
    exceeds standard BIOS maximum of 255.
Warning: Maximum number of heads = 256 (as specified)
    exceeds standard BIOS maximum of 255.
Warning: Maximum number of heads = 256 (as specified)
    exceeds standard BIOS maximum of 255.
Warning: Maximum number of heads = 256 (as specified)
    exceeds standard BIOS maximum of 255.
Added eis  +  *
Warning: Maximum number of heads = 256 (as specified)
    exceeds standard BIOS maximum of 255.
Warning: Maximum number of heads = 256 (as specified)
    exceeds standard BIOS maximum of 255.
Added oldeis  +
8 warnings were issued.

A new /etc/lilo.conf was written containing standard sections
according to a normal updated eisfair installation.

Boot labels are: eis oldeis

You will find your old boot configuration in /etc/lilo.conf.OLD.
You have to put your own boot options into /etc/lilo.conf manually
before you reboot.
Do not forget to run 'lilo' on the command line afterwards if you
changed /etc/lilo.conf!

Press ENTER to continue

Kernel update succeeded.
If you are unsure or have seen some errors,
please answer the following question with 'no':

Activate new kernel installation now (y/n)? y

New kernel 4.9.245-eisfair-1-PAE installed.
Please log off and reboot the system now!

Good luck!

Press ENTER to continue
Successfully installed: eiskernel-pae (5.4.0)!
nursegollum #

zwischendurch habe ich mit dem mc das /tmp-Verzeichnis beobachtet (immer 
rein und wieder raus) und siehe da - da waren zwischendurch ganz viele 
Dateien / Skripte / Archive drin. Ausserdem lief das Update ganz normal 
durch.

Wenn also eisman-Updates immer separat laufen sollten - warum weiss der 
eisman nix davon?

Groetjes
Stefan