[Fli4l_dev] 3.9.0-rev23879 Kernel 3.5.5 Fehler beim builden
Bernd Warschun
hammergott1 at arcor.de
Mi Okt 10 06:22:31 CEST 2012
Hallo Christoph,
hier wie gewünscht die Ausgabe:
fli4l-Router 3.9.0-rev23879 # lspci -vnn
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP61 Memory Controller
[10de:03ea] (rev a1)
Subsystem: Elitegroup Computer Systems Device [1019:2601]
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP61 LPC Bridge
[10de:03e0] (rev a2)
Subsystem: Elitegroup Computer Systems Device [1019:2601]
Flags: bus master, 66MHz, fast devsel, latency 0
00:01.1 SMBus [0c05]: NVIDIA Corporation MCP61 SMBus [10de:03eb] (rev a2)
Subsystem: Elitegroup Computer Systems Device [1019:2601]
Flags: 66MHz, fast devsel, IRQ 7
I/O ports at fc00 [size=64]
I/O ports at 1c00 [size=64]
I/O ports at f400 [size=64]
Capabilities: [44] Power Management version 2
00:01.2 RAM memory [0500]: NVIDIA Corporation MCP61 Memory Controller
[10de:03f5] (rev a2)
Subsystem: Elitegroup Computer Systems Device [1019:2601]
Flags: 66MHz, fast devsel
00:02.0 USB controller [0c03]: NVIDIA Corporation MCP61 USB 1.1
Controller [10de:03f1] (rev a2) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Device [1019:2601]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci_hcd
00:02.1 USB controller [0c03]: NVIDIA Corporation MCP61 USB 2.0
Controller [10de:03f2] (rev a2) (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Device [1019:2601]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=0098
Capabilities: [80] Power Management version 2
Kernel driver in use: ehci_hcd
00:04.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI bridge
[10de:03f3] (rev a1) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: fdd00000-fddfffff
Capabilities: [b8] Subsystem: NVIDIA Corporation Device [10de:cb84]
Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
00:06.0 IDE interface [0101]: NVIDIA Corporation MCP61 IDE [10de:03ec]
(rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: Elitegroup Computer Systems Device [1019:2601]
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable)
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable)
I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Kernel driver in use: pata_amd
00:08.0 IDE interface [0101]: NVIDIA Corporation MCP61 SATA Controller
[10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: Elitegroup Computer Systems Device [1019:2601]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
I/O ports at 09f0 [size=8]
I/O ports at 0bf0 [size=4]
I/O ports at 0970 [size=8]
I/O ports at 0b70 [size=4]
I/O ports at dc00 [size=16]
Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: sata_nv
00:08.1 IDE interface [0101]: NVIDIA Corporation MCP61 SATA Controller
[10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: Elitegroup Computer Systems Device [1019:2601]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
I/O ports at 09e0 [size=8]
I/O ports at 0be0 [size=4]
I/O ports at 0960 [size=8]
I/O ports at 0b60 [size=4]
I/O ports at c800 [size=16]
Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: sata_nv
00:09.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge
[10de:03e8] (rev a2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge:
00000000e8000000-00000000efffffff
Capabilities: [40] Subsystem: NVIDIA Corporation Device [10de:0000]
Capabilities: [48] Power Management version 2
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Capabilities: [100] Virtual Channel
Kernel driver in use: pcieport
00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge
[10de:03e9] (rev a2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fdb00000-fdbfffff
Prefetchable memory behind bridge:
00000000fda00000-00000000fdafffff
Capabilities: [40] Subsystem: NVIDIA Corporation Device [10de:0000]
Capabilities: [48] Power Management version 2
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Capabilities: [100] Virtual Channel
Kernel driver in use: pcieport
00:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge
[10de:03e9] (rev a2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: fd900000-fd9fffff
Prefetchable memory behind bridge:
00000000fd800000-00000000fd8fffff
Capabilities: [40] Subsystem: NVIDIA Corporation Device [10de:0000]
Capabilities: [48] Power Management version 2
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Capabilities: [100] Virtual Channel
Kernel driver in use: pcieport
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map [1022:1101]
Flags: fast devsel
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller [1022:1102]
Flags: fast devsel
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
Flags: fast devsel
01:05.0 Network controller [0280]: Atheros Communications Inc. AR5416
Wireless Network Adapter [AR5008 802.11(a)bgn] [168c:0023] (rev 01)
Subsystem: D-Link System Inc DWA-547 802.11n RangeBooster N 650
DeskTop Adapter [1186:3a6b]
Flags: bus master, 66MHz, medium devsel, latency 168, IRQ 16
Memory at fdee0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] #80 [0000]
Kernel driver in use: ath9k
01:06.0 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit
Ethernet Controller (Copper) [8086:1010] (rev 01)
Subsystem: Compaq Computer Corporation NC7170 Gigabit Server
Adapter [0e11:00db]
Flags: bus master, 66MHz, medium devsel, latency 252, IRQ 17
Memory at fdec0000 (64-bit, non-prefetchable) [size=128K]
Memory at fde40000 (64-bit, non-prefetchable) [size=256K]
I/O ports at bc00 [size=64]
[virtual] Expansion ROM at fdd00000 [disabled] [size=256K]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device
Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+
Kernel driver in use: e1000
01:06.1 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit
Ethernet Controller (Copper) [8086:1010] (rev 01)
Subsystem: Compaq Computer Corporation NC7170 Gigabit Server
Adapter [0e11:00db]
Flags: bus master, 66MHz, medium devsel, latency 252, IRQ 18
Memory at fdea0000 (64-bit, non-prefetchable) [size=128K]
I/O ports at b800 [size=64]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device
Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+
Kernel driver in use: e1000
02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD]
nee ATI RV370 5B60 [Radeon X300 (PCIE)] [1002:5b60] (prog-if 00 [VGA
controller])
Subsystem: Advanced Micro Devices [AMD] nee ATI Device [1002:0302]
Flags: bus master, fast devsel, latency 0, IRQ 5
Memory at e8000000 (32-bit, prefetchable) [size=128M]
I/O ports at ac00 [size=256]
Memory at fdcf0000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at fdc00000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Express Endpoint, MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [100] Advanced Error Reporting
02:00.1 Display controller [0380]: Advanced Micro Devices [AMD] nee ATI
RV370 [Radeon X300SE] [1002:5b70]
Subsystem: Advanced Micro Devices [AMD] nee ATI Device [1002:0303]
Flags: bus master, fast devsel, latency 0
Memory at fdce0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Express Endpoint, MSI 00
fli4l-Router 3.9.0-rev23879 #
MfG
Bernd
Am 09.10.2012 21:40, schrieb Christoph Schulz:
> Hallo!
>
> Am 09.10.2012 20:03, schrieb Bernd Warschun:
>> Vielen Dank für den Hinweis, der Build läuft jetzt sauber durch!
>> Aber nach dem Booten habe ich folgende Fehlermeldung:
>>
>> (/etc/boot.d/rc010.hddrv) ERR: modprobe pata_legacy failed!
>> (/etc/boot.d/rc010.hddrv) ERR: modprobe: can't load module pata_legacy
>> (/lib/modules/3.5.5/kernel/drivers/ata/pata_legacy.ko): No such device
>
> "No such device" bedeutet, dass der Treiber der Meinung ist, dass
> keine Hardware da ist, die er betreuen könnte. Momentan einfach
> ignorieren. Hilfreich ist auf jeden Fall die Ausgabe von "lspci -vnn"
> auf dem Router (das Programm "lspci" ist als OPT_LSPCI im Paket TOOLS
> drin).
>
>
> Danke und Gruß,
>
> Christoph
Mehr Informationen über die Mailingliste Fli4l_dev