[Fli4l_dev] Telekom Du?==?utf-8?Q?alstak Zugang und IPv6

[Christoph Schulz]

Hallo!

> >  Hier wird das Netz IPV6_NET_1 "angepasst", weil ein Präfix
> > über den
> >  DHCPv6-Circuit erhalten wurde. Ich vermute, dass solche Zeilen
> > bei dir
> >  fehlen?
>
> stimmt. Kann ich nicht finden.
> Doch warum?? Was brauchst du eventuell sonst noch an Info?

1) Kommt die allererste Meldung ("setting up IPv6 networks...")?
2) Kommen überhaupt prefixv6-up-Meldungen? Bei mir lautet die komplette
Ausgabe z.B.:

Oct 14 08:37:21 fence local2.notice prefixv6-up[28199]: circ4[ppp2]:
IPv6 prefix 2a02:560:41ab:5b00::/56 has appeared
Oct 14 08:37:21 fence local2.notice prefixv6-up[28199]: executing
/etc/ppp/prefixv6-up030.nets
Oct 14 08:37:21 fence local2.notice prefixv6-up[28199]: setting up IPv6
networks...
Oct 14 08:37:21 fence local2.notice prefixv6-up[28199]:   
ipv6-interface-setup.sh: IPV6_NET_1: advertising prefix
2a02:560:41ab:5b01::/64 on eth0 for 21600/21600 seconds
Oct 14 08:37:21 fence local2.notice prefixv6-up[28199]:   
ipv6-interface-setup.sh: IPV6_NET_1: address 2a02:560:41ab:5b01::1/64
added to eth0 for 21600/21600 seconds
Oct 14 08:37:22 fence local2.notice prefixv6-up[28199]: executing
/etc/ppp/prefixv6-up050.circuits-net
Oct 14 08:37:22 fence local2.notice prefixv6-up[28199]: executing
/etc/ppp/prefixv6-up300.logip

Kommt davon irgendetwas?

3) Siehst du überhaupt irgendwo Syslog-Meldungen vom DHCPv6-Client? Bei
mir kommt (in daemon.log) z.B. folgendes:

Oct 14 08:40:45 fence daemon.debug Dibbler-circ4[15992]: Prefix
delegation option (with scope) found.
Oct 14 08:40:45 fence daemon.debug Dibbler-circ4[15992]: PD: Adding
single prefix.
Oct 14 08:40:45 fence daemon.debug Dibbler-circ4[15992]: Parsing
/var/lib/dibbler/circ4/client.conf done, result=0(success)
Oct 14 08:40:45 fence daemon.debug Dibbler-circ4[15992]: 1 interface(s)
specified in /var/lib/dibbler/circ4/client.conf
Oct 14 08:40:45 fence daemon.info Dibbler-circ4[15992]: Interface
ppp2/20 configuration has been loaded.
Oct 14 08:40:45 fence daemon.debug Dibbler-circ4[15992]: DUID's value =
00:01:00:01:21:74:6d:1f:52:54:00:b6:98:39 was loaded from client-duid
file.
Oct 14 08:40:45 fence daemon.info Dibbler-circ4[15992]: My DUID is
00:01:00:01:21:74:6d:1f:52:54:00:b6:98:39.
[...]
Oct 14 08:40:45 fence daemon.info Dibbler-circ4[15992]: Creating SOLICIT
message with 0 IA(s), no TA and 1 PD(s) on ppp2/20 interface.
Oct 14 08:40:45 fence daemon.debug Dibbler-circ4[15992]: Sending
SOLICIT(opts:1 25 8 ) on ppp2/20 to multicast.
Oct 14 08:40:45 fence daemon.debug Dibbler-circ4[15992]: Sleeping for 1
second(s).
Oct 14 08:40:45 fence daemon.debug Dibbler-circ4[15992]: Received 119
bytes on interface ppp2/20 (socket=6, addr=fe80::56e0:320f:fcc5:a800).
Oct 14 08:40:45 fence daemon.info Dibbler-circ4[15992]: Received
ADVERTISE on ppp2/20,trans-id=0xb8f824, 4 opts: 1 2 25 64
Oct 14 08:40:45 fence daemon.debug Dibbler-circ4[15992]: Script
execution skipped for ADVERTISE response to SOLICIT. No action needed
for this message type.
Oct 14 08:40:45 fence daemon.debug Dibbler-circ4[15992]: Sleeping for 1
second(s).
Oct 14 08:40:46 fence daemon.info Dibbler-circ4[15992]: Processing msg
(SOLICIT,transID=0xb8f824,opts: 1 25 8)
Oct 14 08:40:46 fence daemon.info Dibbler-circ4[15992]: Creating
REQUEST. Backup server list contains 1 server(s).
Oct 14 08:40:46 fence daemon.debug Dibbler-circ4[15992]: Advertise from
Server 
ID=00:02:00:00:05:83:35:34:3a:65:30:3a:33:32:3a:63:35:3a:61:66:3a:63:30:
00:00:00, no preference option, assumed 0.[using this]
Oct 14 08:40:46 fence daemon.debug Dibbler-circ4[15992]: Sending
REQUEST(opts:1 25 2 8 ) on ppp2/20 to multicast.
Oct 14 08:40:46 fence daemon.debug Dibbler-circ4[15992]: Sleeping for 1
second(s).
Oct 14 08:40:47 fence daemon.debug Dibbler-circ4[15992]: Received 119
bytes on interface ppp2/20 (socket=6, addr=fe80::56e0:320f:fcc5:a800).
Oct 14 08:40:47 fence daemon.info Dibbler-circ4[15992]: Received REPLY
on ppp2/20,trans-id=0x7b762, 4 opts: 1 2 25 64
Oct 14 08:40:47 fence daemon.debug Dibbler-circ4[15992]: PD: Adding
2a02:560:41ab:6600:: prefix to PD (iaid=1) to addrDB.
Oct 14 08:40:47 fence daemon.notice Dibbler-circ4[15992]: PD: Adding
prefix 2a02:560:41ab:6600::/56 to all interfaces (prefix will be split
to /64 prefixes if necessary).
Oct 14 08:40:47 fence daemon.debug Dibbler-circ4[15992]: PD: Interface
ppp2/20 is the interface, where prefix has been obtained, skipping.
[...]
Oct 14 08:40:47 fence daemon.debug Dibbler-circ4[15992]: RENEW(IA_PD)
will be sent (T1) after 10800, REBIND (T2) after 17280 seconds.
Oct 14 08:40:47 fence daemon.debug Dibbler-circ4[15992]: About to
execute /var/lib/dibbler/circ4/dibbler-notify-circ4.sh script, 16
variables.
Oct 14 08:40:47 fence daemon.debug Dibbler-circ4[15992]: Script
execution complete, return code=0
Oct 14 08:40:47 fence daemon.debug Dibbler-circ4[15992]: Sleeping for
10798 second(s).

4) Wird dein Präfix ins WAN-IPv6-Protokoll geschrieben?


Viele Grüße,
-- 
Christoph Schulz
[fli4l-Team]