[Fli4l_dev] Neue fli4l Testversionen, Webseitenzugriff

[Harvey]

Hallo zusammen,

und wieder gibt es wieder einen neuen Build ��

Bei Linux purzeln die neuen Kernel nur so aus dem Hut...

Changelog:
4b389d23a - wlan_ng: add WPA3/PMF support and robust 80 MHz hostapd 
config     enable WPA3/SAE and transition-mode operation in wlan_ng AP 
config
     improve PMF capability detection using iw phy information, 
including SAE support and management protection ciphers
     keep PMF=auto for capable devices instead of incorrectly falling 
back to off on ath10k/QCA988x hardware
     add explicit SAE credential handling with sae_password for WPA3-SAE 
and WPA2/WPA3 transition mode
     keep wpa_passphrase for WPA2 compatibility in transition mode
     improve 5 GHz 80 MHz AP configuration generation
     add HT40 sideband selection for VHT80 operation
     add VHT center frequency segment calculation for 80 MHz channels
     fall back to 20 MHz with warning when 80 MHz parameters cannot be 
derived safely
     preserve working WPA2 AP operation while making WPA3 transition 
mode functional on supported hardware
     validate changes against ath10k QCA988x on 5 GHz channel 36 / 80 MHz

This fixes multiple issues seen during testing:

     hostapd AP startup failure on 80 MHz due to incomplete VHT config
     incorrect PMF detection causing broken transition-mode configs
     WPA3 transition mode advertising without successful client 
authentication due to missing SAE password handling

d94018a48 - Add dependencies to libopenssl
c0e975f13 - activate WPA3 encoding for hostapd
de8b27829 - wlan_ng: add runtime compatibility fallback and status UI - 
add consolidated rc130.wlan_ng startup handling
- restore both client (wpa_supplicant) and AP (hostapd) modes
- generate runtime wpa_supplicant and hostapd configs
- add metadata comments for configured/effective values

- add channel width fallback:
   - downgrade unsupported 40/80/160 MHz requests to 20 MHz
- add PMF fallback:
   - downgrade auto to off if unsupported
   - fail if PMF is required but unsupported
- add security compatibility handling:
   - downgrade WPA2/WPA3 transition to WPA2-PSK if needed
   - fail for unsupported WPA3-SAE
- remove fragile hard band validation to avoid false negatives
   on legacy hardware

- switch rc logging to log_info/log_warn/log_error
- fix logging so command substitution no longer corrupts configs

- add status_wlan_ng.cgi read-only status page
- show configured/effective values for:
   - band
   - channel width
   - security
   - PMF
- add explicit fallback indicators for width, security and PMF
- improve capability display for legacy devices

- add/update language files for English, German and French

0a4d90fca - wlan_ng: set check default for OPT_WLAN_NG to no as it is 
project default
5d071f4bd - wlan_ng: add checks to both wlan.ext and wlan_ng.ext to 
allow only one of the wlan packages at a time
57310b3ed - wlan_ng: initial release of a wlan rewrite suitable for 
modern kernels

Der Download ist an der üblichen Stelle zu finden:

https://www.fli4l.de/doku.php?id=fli4l:download:developerversion:start#entwicklerversion_41

Gruß
Harvey