[jacorb-developer] Migration from JACORB 3.2 to 3.3
Marko Skocibusic | GAF AG
marko.skocibusic at gaf.de
Wed Jun 13 13:54:01 CEST 2018
Hi Amandeu,
of course the idea is to migrate to the latest version of JacORB and I am aware that some major issues were solved as we are affected by some of them. But I would like to migrate incrementally to run into one problem after the other and not all at once as I would expect more problems to pop up during the migration to 3.9. Originally I started the migration with version 2.3.0.
I checked the release notes in advance and maybe this point is relevant:
- Fix for built-in interceptors and local calls (BZ956/957).
Add new isLocalInterceptors to *RequestInfoImpl Public API
Thank you for your advice. I will have a look at the code.
Kind regards,
Marko Skocibusic
-----Ursprüngliche Nachricht-----
----------------------------------------------------------------------------
Marko Skocibusic
GAF AG | Arnulfstr. 199 | 80634 Munich | Germany
Phone: +49 89 121528 888 | Fax: +49 89 121528 79
mailto:marko.skocibusic at gaf.de | http://www.gaf.de
CEO: Dr. Peter Volk, Chairman of the supervisory board: Massimo Comparini
Place of business: Munich, Magistrate's court Munich HRB 140 509
WARNING: This message contains confidential and/or proprietary information which may be subject to privilege or immunity and which is intended for the use of its addressee only. Should you receive this message in error, you are kindly requested to inform the sender and to definitively remove it from any paper or electronic format. Any other use of this e-mail is strictly forbidden. Thank you in advance for your cooperation.
Von: jacorb-developer-bounces~marko.skocibusic=gaf.de at lists.spline.inf.fu-berlin.de [mailto:jacorb-developer-bounces~marko.skocibusic=gaf.de at lists.spline.inf.fu-berlin.de] Im Auftrag von Amadeu Barbosa
Gesendet: Mittwoch, 13. Juni 2018 13:40
An: Discussions concerning CORBA development with JacORB <jacorb-developer at lists.spline.inf.fu-berlin.de>
Betreff: Re: [jacorb-developer] Migration from JACORB 3.2 to 3.3
Hi Marko
First of all, I recommend you to migrate for the most recent version of JacORB instead. Old versions are not supported and 3.3 and 3.5 has some other important problems already fixed in 3.9.
CORBA transient is just a "could not connect to port" exception, probably your server isn't listening properly at that port. I personally never try to listen ports in that range and I never have seen this warning before.
JacORB maintainers are a very small team so in a situation like that I try to figure out what happened in JacORB code by myself if I must to use old versions and I compare with release notes to understand if it's already fixed.
Regards
Amadeu Barbosa
Em qua, 13 de jun de 2018 06:45, Marko Skocibusic | GAF AG < marko.skocibusic at gaf.de> escreveu:
> Hi there,
>
> I have to maintain an old piece of server software and do not have
> much experience with JACORB. Currently I am facing an issue with the
> migration from version 3.2 to 3.3. There are no problems with version
> 3.2. With version 3.3 there is still no problem running it on our
> servers, but when I try to start it up on the server of our customer
> it fails to connect to the local ORB (I replaced IP addresses and ports):
>
> org.omg.CORBA.TRANSIENT: Retries exceeded, couldn't reconnect to
> 123.123.123.123:12345
> at
> org.jacorb.orb.iiop.ClientIIOPConnection.connect(ClientIIOPConnection.
> java:223)
> ~[jacorb-3.3.jar:3.3 ${jacorb_version_info}]
> at
> org.jacorb.orb.giop.GIOPConnection.sendMessage(GIOPConnection.java:104
> 2)
> ~[jacorb-3.3.jar:3.3 ${jacorb_version_info}]
> at
> org.jacorb.orb.giop.GIOPConnection.sendRequest(GIOPConnection.java:987
> )
> ~[jacorb-3.3.jar:3.3 ${jacorb_version_info}]
> at
> org.jacorb.orb.giop.ClientConnection.sendRequest(ClientConnection.java
> :308)
> ~[jacorb-3.3.jar:3.3 ${jacorb_version_info}]
> at
> org.jacorb.orb.giop.ClientConnection.sendRequest(ClientConnection.java
> :289)
> ~[jacorb-3.3.jar:3.3 ${jacorb_version_info}]
> at
> org.jacorb.orb.Delegate._invoke_internal(Delegate.java:1363)
> ~[jacorb-3.3.jar:3.3 ${jacorb_version_info}]
> at org.jacorb.orb.Delegate.invoke_internal(Delegate.java:1188)
> ~[jacorb-3.3.jar:3.3 ${jacorb_version_info}]
> at org.jacorb.orb.Delegate.invoke(Delegate.java:1176)
> ~[jacorb-3.3.jar:3.3 ${jacorb_version_info}]
> at org.jacorb.orb.Delegate.invokeBuiltin(Delegate.java:2200)
> ~[jacorb-3.3.jar:3.3 ${jacorb_version_info}]
> at org.jacorb.orb.Delegate.is_a(Delegate.java:2049)
> ~[jacorb-3.3.jar:3.3 ${jacorb_version_info}]
> at
> org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:130)
> ~[?:1.8.0_172]
> at
> org.omg.CosNaming.NamingContextExtHelper.narrow(NamingContextExtHelper
> .java:73)
> ~[?:1.8.0_172]
>
> Taking a look into the log shows a problem with port binding:
>
> 12 06 2018 13:17:48 [main] [INFO] jacorb.orb.singleton - created
> ORBSingleton
> 12 06 2018 13:17:48 [main] [WARN] jacorb.orb.singleton - OMG.ORB
> classloader does not match JacORB ORBSingleton classloader. This may
> cause problems; see the Programmi ngGuide for further details
> 12 06 2018 13:17:48 [main] [INFO] jacorb.orb.singleton - created
> ORBSingleton
> 12 06 2018 13:17:48 [main] [WARN] jacorb.orb.singleton - OMG.ORB
> classloader does not match JacORB ORBSingleton classloader. This may
> cause problems; see the Programmi ngGuide for further details
> 12 06 2018 13:17:48 [main] [INFO] jacorb.codeset - Set default native
> char codeset to ISO8859_1
> 12 06 2018 13:17:48 [main] [INFO] jacorb.orb.interceptors -
> InterceptorManager started with 0 Server Interceptors, 0 Client
> Interceptors and 1 IOR Interceptors
> 12 06 2018 13:20:22 [main] [INFO] jacorb.orb.interceptors -
> InterceptorManager started with 0 Server Interceptors, 0 Client
> Interceptors and 1 IOR Interceptors
> 12 06 2018 13:20:22 [main] [INFO] jacorb.poa - oid: 01 4B 15 4C 0D 3F
> 20
> 32 14 0E 16 16 40 30 0A 3F 46 10 35 0B .K.L.? 2.... at 0.?F.5.11 4D 4D 4D
> 4D 4D 32 36 11 0E 1F
> .MMMMM26...object is activated
> 12 06 2018 13:20:22 [main] [INFO] jacorb.orb.interceptors -
> InterceptorManager started with 0 Server Interceptors, 0 Client
> Interceptors and 1 IOR Interceptors
> 12 06 2018 13:20:22 [main] [INFO] jacorb.poa - oid: 01 4B 15 4C 0E 39
> 07
> 37 4C 04 46 0E 4D 37 3D 38 38 3C 16 1B .K.L.9.7L.F.M7=88<..01 32 24 2E 48 4A
> .2$.HJobject is activated
> 12 06 2018 13:20:22 [main] [INFO] jacorb.orb.interceptors -
> InterceptorManager started with 0 Server Interceptors, 0 Client
> Interceptors and 1 IOR Interceptors
> 12 06 2018 13:20:22 [main] [INFO] jacorb.poa - oid: 01 4B 15 4C 10 3C
> 4B
> 49 06 07 0D 32 10 39 05 47 14 15 36 21 .K.L.<KI...2.9.G..6!01 06 24 42 28 19
> ..$B(.object is activated
> 12 06 2018 13:20:22 [main] [INFO] jacorb.orb.interceptors -
> InterceptorManager started with 0 Server Interceptors, 0 Client
> Interceptors and 1 IOR Interceptors
> 12 06 2018 13:20:22 [main] [INFO] jacorb.poa - oid: 01 4B 15 4C 11 23
> 29
> 15 21 0F 22 48 1A 00 20 38 21 4D 3D 2B .K.L.#).!."H.. 8!M=+11 4D 4D 4D
> 4D 4C 37 04 29 16 48
> .MMMML7.).Hobject is activated
> 12 06 2018 13:20:22 [main] [INFO] jacorb.orb.interceptors -
> InterceptorManager started with 0 Server Interceptors, 0 Client
> Interceptors and 1 IOR Interceptors
> 12 06 2018 13:20:22 [main] [INFO] jacorb.orb.interceptors -
> InterceptorManager started with 0 Server Interceptors, 0 Client
> Interceptors and 1 IOR Interceptors
> 12 06 2018 13:20:22 [main] [INFO] jacorb.orb.giop -
> ClientConnectionManager: created new ClientGIOPConnection to
> 123.123.123.123:12345 (4dc7a2a3)
> 12 06 2018 13:20:22 [main] [WARN] jacorb.orb.socketfactory - Cannot
> bind socket between ports 59000 and 59999 to target
> 123.123.123.123:12345
> 12 06 2018 13:20:22 [main] [INFO] jacorb.orb.iiop - Retrying to
> connect to
> 123.123.123.123:12345
> 12 06 2018 13:20:23 [main] [WARN] jacorb.orb.socketfactory - Cannot
> bind socket between ports 59000 and 59999 to target
> 123.123.123.123:12345
> 12 06 2018 13:20:23 [main] [INFO] jacorb.orb.iiop - Retrying to
> connect to
> 123.123.123.123:12345
> 12 06 2018 13:20:24 [main] [WARN] jacorb.orb.socketfactory - Cannot
> bind socket between ports 59000 and 59999 to target
> 123.123.123.123:12345
> 12 06 2018 13:20:24 [main] [INFO] jacorb.orb.iiop - Retrying to
> connect to
> 123.123.123.123:12345
> 12 06 2018 13:20:24 [main] [WARN] jacorb.orb.socketfactory - Cannot
> bind socket between ports 59000 and 59999 to target
> 123.123.123.123:12345
> 12 06 2018 13:20:24 [main] [INFO] jacorb.orb.iiop - Retrying to
> connect to
> 123.123.123.123:12345
> 12 06 2018 13:20:25 [main] [WARN] jacorb.orb.socketfactory - Cannot
> bind socket between ports 59000 and 59999 to target
> 123.123.123.123:12345
> 12 06 2018 13:20:25 [main] [INFO] jacorb.orb.iiop - Retrying to
> connect to
> 123.123.123.123:12345
> 12 06 2018 13:20:25 [main] [WARN] jacorb.orb.socketfactory - Cannot
> bind socket between ports 59000 and 59999 to target
> 123.123.123.123:12345
> 12 06 2018 13:20:25 [main] [INFO] jacorb.orb - prepare ORB for shutdown...
> 12 06 2018 13:20:25 [main] [INFO] jacorb.orb - ORB going down...
> 12 06 2018 13:20:25 [POADestructor] [INFO] jacorb.poa - POA RootPOA
> destroyed
> 12 06 2018 13:20:25 [ServerSocketListener] [INFO] jacorb.orb.iiop -
> Listener exiting
> 12 06 2018 13:20:25 [POADestructor] [INFO] jacorb.poa - POA
> NameServer-POA destroyed
> 12 06 2018 13:20:25 [main] [INFO] jacorb.orb - ORB shutdown complete
>
> I'm ignoring the warning that OMG.ORB classloader does not match
> JacORB ORBSingleton classloader as this appears in the log since
> before I took over this project and so far did not cause any problems.
> But what could be the reason, that it could not bind a port to the
> local ORB? As I said I am not familiar with JACORB and would be glad
> for any ideas and hints or pointers to documentation that could help.
>
> And please let me know if should provide some additional information.
>
> Thank you very much and kind regards,
> Marko Skocibusic
>
> ----------------------------------------------------------------------
> ------
>
> Marko Skocibusic
>
> GAF AG | Arnulfstr. 199 | 80634 Munich | Germany
> Phone: +49 89 121528 888 | Fax: +49 89 121528 79
>
> mailto:marko.skocibusic at gaf.de | http://www.gaf.de
>
> CEO: Dr. Peter Volk, Chairman of the supervisory board: Massimo
> Comparini Place of business: Munich, Magistrate's court Munich HRB 140
> 509
>
> WARNING: This message contains confidential and/or proprietary
> information which may be subject to privilege or immunity and which is
> intended for the use of its addressee only. Should you receive this
> message in error, you are kindly requested to inform the sender and to
> definitively remove it from any paper or electronic format. Any other
> use of this e-mail is strictly forbidden. Thank you in advance for your cooperation.
>
> _______________________________________________
> jacorb-developer maillist -
> jacorb-developer at lists.spline.inf.fu-berlin.de
> https://lists.spline.inf.fu-berlin.de/mailman/listinfo/jacorb-develope
> r
>
_______________________________________________
jacorb-developer maillist - jacorb-developer at lists.spline.inf.fu-berlin.de
https://lists.spline.inf.fu-berlin.de/mailman/listinfo/jacorb-developer
More information about the jacorb-developer
mailing list