[Eisfair] E1 force reboot

Thomas Bork tom at eisfair.org
So Okt 4 00:00:18 CEST 2015


Am 03.10.2015 um 14:46 schrieb Jürgen Pfautsch:

> Leider funktioniert kein reboot und auch kein reboot -f.

Dann stimmt mit Deinem eisfair etwas nicht. Bei mir funktioniert

reboot
shutdown -r now
init 6

und möglicherweise noch mehr.

> Hat jemand einen Hinweis?

testeis # ls -l `which reboot`
lrwxrwxrwx 1 root root 4 Jul 13 09:44 /sbin/reboot -> halt
testeis # ls -l /sbin/halt
-rwxr-xr-x 1 root root 11184 Sep 28  2013 /sbin/halt
testeis # /sbin/halt --help
usage: halt [-n] [-w] [-d] [-f] [-h] [-i] [-p]
         -n: don't sync before halting the system
         -w: only write a wtmp reboot record and exit.
         -d: don't write a wtmp record.
         -f: force halt/reboot, don't call shutdown.
         -h: put harddisks in standby mode.
         -i: shut down all network interfaces.
         -p: power down the system (if possible, otherwise halt).
testeis # shutdown --help
shutdown: invalid option -- '-'
Usage:    shutdown [-akrhPHfFnc] [-t sec] time [warning message]
                   -a:      use /etc/shutdown.allow
                   -k:      don't really shutdown, only warn.
                   -r:      reboot after shutdown.
                   -h:      halt after shutdown.
                   -P:      halt action is to turn off power.
                   -H:      halt action is to just halt.
                   -f:      do a 'fast' reboot (skip fsck).
                   -F:      Force fsck on reboot.
                   -n:      do not go through "init" but go down real fast.
                   -c:      cancel a running shutdown.
                   -t secs: delay between warning and kill signal.
                   ** the "time" argument is mandatory! (try "now") **
testeis # init --help
init: invalid option -- '-'
Usage: init {-e VAR[=VAL] | [-t SECONDS] 
{0|1|2|3|4|5|6|S|s|Q|q|A|a|B|b|C|c|U|u}}

-- 
der tom
[eisfair-team]


Mehr Informationen über die Mailingliste Eisfair