[Eisfair] [e1] Fehler nach update auf base v2.8.5 und eiskernel-smp v4.4.0
W. Loefstedt
oliaros at web.de
Mo Jan 13 16:52:48 CET 2020
Am 13.01.2020 um 16:24 schrieb Marcus Röckrath:
Hallo Marcus,
> Wie ich schon nachlegte auch bitte mal die Ausgabe von lspci -vv.
00:00.0 Host bridge: Broadcom CNB20LE Host Bridge (rev 06)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
00:00.1 Host bridge: Broadcom CNB20LE Host Bridge (rev 06)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 48, Cache Line Size: 32 bytes
00:02.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet
Pro 100 (rev 0d)
Subsystem: Intel Corporation EtherExpress PRO/100 S Server Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fe000000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at d800 [size=64]
Region 2: Memory at fd800000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at febf0000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: e100
Kernel modules: e100
00:06.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE/SATA
Controller (rev 50)
Subsystem: VIA Technologies, Inc. VT6421 IDE/SATA Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at d400 [size=16]
Region 1: I/O ports at d000 [size=16]
Region 2: I/O ports at b800 [size=16]
Region 3: I/O ports at b400 [size=16]
Region 4: I/O ports at b000 [size=32]
Region 5: I/O ports at a800 [size=256]
[virtual] Expansion ROM at 80000000 [disabled] [size=64K]
Capabilities: [e0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sata_via
Kernel modules: sata_via
00:07.0 VGA compatible controller: Advanced Micro Devices, Inc.
[AMD/ATI] Rage 3 [Rage XL PCI] (rev 27) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Rage XL PCI
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at a400 [size=256]
Region 2: Memory at fb800000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 ISA bridge: Broadcom CSB5 South Bridge (rev 93)
Subsystem: Broadcom CSB5 South Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4, scb2_flash
00:0f.1 IDE interface: Broadcom CSB5 IDE Controller (rev 93) (prog-if 8a
[ISA Compatibility mode controller, supports both channels switched to
PCI native mode, supports bus mastering])
Subsystem: Broadcom CSB5 IDE Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 8800 [size=16]
Kernel driver in use: pata_serverworks
Kernel modules: pata_serverworks, pata_acpi, ata_generic
00:0f.2 USB controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 05)
(prog-if 10 [OHCI])
Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:0f.3 Host bridge: Broadcom CSB5 LPC bridge
Subsystem: Broadcom CSB5 LPC bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
01:04.0 SCSI storage controller: Broadcom / LSI 53c1010 66MHz Ultra3
SCSI Adapter (rev 01)
Subsystem: Broadcom / LSI Asus TR-DLS onboard 53C1010-66
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4250ns min, 4500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 8400 [size=256]
Region 1: Memory at fa800000 (64-bit, non-prefetchable) [size=1K]
Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sym53c8xx
Kernel modules: sym53c8xx
01:04.1 SCSI storage controller: Broadcom / LSI 53c1010 66MHz Ultra3
SCSI Adapter (rev 01)
Subsystem: Broadcom / LSI Asus TR-DLS onboard 53C1010-66
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4250ns min, 4500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at 8000 [size=256]
Region 1: Memory at f9800000 (64-bit, non-prefetchable) [size=1K]
Region 3: Memory at f9000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sym53c8xx
Kernel modules: sym53c8xx
> Weißt du, welcher der obigen Treiber für deine Platten zuständig ist?
Nein
> Wegen Abhängigkeit zu libata
> libata 160073 4
> pata_serverworks,ata_generic,sata_via,pata_acpi
> müsste es einer derer in der zweiten Zeile sein. Also nicht der sym53c8xx.
> Kannst du noch etwas zur hardware sagen?
> 2 Platten als Raid; weitere Platten?
Nein. MB ist ein ASUS TR-DLS Dual Tualatin mit zwei IDE-Anschlüssen, die
beiden Platten des RAID1 hängen an IDE1 und IDE2 jeweils als Master.
Falls du weitere Details brauchst, bitte melde dich.
Gruss, Wolfgang
Mehr Informationen über die Mailingliste Eisfair