[Eisfair_dev] hpaio scannen ja, aber Drucken NEIN!? (was: SANE mit hpaio)

[Taxena Gasparov]

Hallo,

ich versuche den Scanner von HP Color LaserJet CM1312nfi MFP mit sane zu betreiben.
> found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x4f17 [HP Color LaserJet CM1312nfi MFP]) at libusb:001:016

Trotz aktiviertem "hp"-Backend wird der Scanner nicht gefunden:
> scanimage -L
> 
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).

Die "Scanner database" im Sanemenü listet das Gerät zwei Mal:
> hplip|hpaio|Hewlett-Packard|Color LaserJet CM1312nfi MFP|||0x03f0:0x4f17|good|                                                                                               
> hplip|hpaio|Hewlett-Packard|Color LaserJet CM1312nfi Multifunction Printer|||0x03f0:0x4f17|good|

Weder hplip noch hpaio stehen für die Konfigurationsvariable SANE_BACKEND_X_NAME zur Auswahl, nur hp, 
hp3500, hp4200, ...
hplip oder hpaio manuell eintragen?


Am 30.10.12 um 21:48 schrieb Stephan Manske:
> #------------------------------------------------------------------------------
> # /etc/config.d/usb - configuration file for usb
> 
> 
> #------------------------------------------------------------------------------
> # Basic configuration
> #------------------------------------------------------------------------------
> 
> START_USB='yes'                        # USE yes or no
> USB_LOWLEVEL='uhci'                    # driver for USB-Chipset
> USB_2='yes'                            # start USB2 support
> USB_PRINTER='yes'                      # driver for usb-printer
> USB_STORAGE='yes'                      # driver for usb-storage
> 
> #------------------------------------------------------------------------------
> # USB serial options
> #------------------------------------------------------------------------------
> 
> USB_SERIAL='no'                        # Use yes or no, for driver USB to RS232
>                                         # adaptors
> USB_SERIAL_DRIVER=''                   # low level driver for USB serial
> USB_SERIAL_OPTIONS=''                  # options USB serial driver
> 
> #------------------------------------------------------------------------------
> # USB dependent services
> #------------------------------------------------------------------------------
> 
> USB_DEP_SERVICE_N='1'                  # how many dependent services
> USB_DEP_SERVICE_1_NAME='HP Drucker'    # Use a name what ever you want, it's
>                                         # only for you
> USB_DEP_SERVICE_1_ACTIVE='yes'         # Use yes or no
> USB_DEP_SERVICE_1_DEVICE='lprng'       # Use the device name, like lprng or
>                                         # usbcam
> 
> USB_DEP_SERVICE_2_NAME='HP Scanner'    # Use a name what ever you want, it's
>                                         # only for you
> USB_DEP_SERVICE_2_ACTIVE='yes'         # Use yes or no
> USB_DEP_SERVICE_2_DEVICE='sane'        # Use the device name, like lprng or
>                                         # usbcam
> 
> #------------------------------------------------------------------------------
> # End
> #------------------------------------------------------------------------------


Die USB-Konfiguration hat akutell keine USB_DEP_*-Variablen mehr. Ist dies ursächlich für die Nichtfunktion?

Ist sane an diesem HP-MFP-Gerät funktional? Sind weitere Pakete, z.B. hplip, notwendig?
Falls ja, welche Einstellungen sind vorzunehmen?

Dank
Taxi