[Eisfair] SMART (smartcl 7.2 20201290 r5155)
Nils Lange
nils at killa.eisfair.net
Sa Feb 19 01:34:06 CET 2022
Hallo Markus,
>
> Lief auf der Platte ein regelmäßiger Selftest (long und short)?
nein
>
> Wie war der HEALTH-Status der Platte?
>
> Mit
>
> smartct -H ...
>
> bzww.
>
> smartctl -a ...
>
> kannst du das sehen.
mail # smartctl -H /dev/sdb
smartctl 7.2 2020-12-30 r5155 [i686-linux-5.10.93-eisfair-1-PAE] (local
build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
mail # smartctl -a /dev/sdb
smartctl 7.2 2020-12-30 r5155 [i686-linux-5.10.93-eisfair-1-PAE] (local
build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Desktop SSHD
Device Model: ST2000DX001-1CM164
Serial Number: Z1E5N986
LU WWN Device Id: 5 000c50 064f0160d
Firmware Version: CC43
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Feb 19 01:27:45 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection:
Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: ( 575) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 218) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x1081) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 110 099 006 Pre-fail
Always - 28608112
3 Spin_Up_Time 0x0003 095 095 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 67
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail
Always - 247496641
9 Power_On_Hours 0x0032 017 017 000 Old_age
Always - 72763
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 69
183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always
- 1
184 End-to-End_Error 0x0032 100 100 099 Old_age Always
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always
- 0 0 0
189 High_Fly_Writes 0x003a 098 098 000 Old_age Always
- 2
190 Airflow_Temperature_Cel 0x0022 061 049 045 Old_age Always
- 39 (Min/Max 35/45)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always
- 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 46
193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always
- 977204
194 Temperature_Celsius 0x0022 039 051 000 Old_age Always
- 39 (0 16 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age
Offline - 45489h+36m+46.654s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age
Offline - 57184867256
242 Total_LBAs_Read 0x0000 100 253 000 Old_age
Offline - 413816402633
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 7204
-
# 2 Short offline Completed without error 00% 7180
-
# 3 Short offline Completed without error 00% 7156
-
# 4 Short offline Completed without error 00% 7132
-
# 5 Short offline Completed without error 00% 7108
-
# 6 Short offline Completed without error 00% 7087
-
# 7 Short offline Completed without error 00% 7036
-
# 8 Short offline Completed without error 00% 7012
-
# 9 Short offline Completed without error 00% 6988
-
#10 Short offline Completed without error 00% 6964
-
#11 Short offline Completed without error 00% 6940
-
#12 Short offline Completed without error 00% 6916
-
#13 Short offline Completed without error 00% 6894
-
#14 Short offline Completed without error 00% 6868
-
#15 Short offline Completed without error 00% 6844
-
#16 Short offline Completed without error 00% 6820
-
#17 Short offline Completed without error 00% 6796
-
#18 Short offline Completed without error 00% 6772
-
#19 Short offline Completed without error 00% 6748
-
#20 Short offline Completed without error 00% 6726
-
#21 Short offline Completed without error 00% 6700
-
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
>>
>> Was ist der einfachste Weg die alte auf die neue zu übertragen, wobei
>> die neue größer ist? In dem Rechner gibt es kein DVD-LW und keinen
>> weiteren freien SATA-Anschluss. Muss ich dann in einem anderen PC machen.
>
> Wenn die Platte wirklich noch ein intaktes Dateisystem hat, könnte man z. B.
> mit partimage ein bootbares Abbild erzeugen.
>
> Hat das System einen aktuellen Kernel? Ich farge wegen lilo oder extlinux
> als Bootmanager.
>
Platte ist noch in Betrieb und beinhaltet die home-Verzeichnisse der
user. Werde gleich die Daten auf eine neu Platte kopieren.
Aber was ist mit diesem neuen UUID? Ich würde die neue Platte einfach
als /dev/sdd1 ins fstab einfügen.
Gruß, Nils
Mehr Informationen über die Mailingliste Eisfair